The coremask option in DPDK is difficult to use and we should be
promoting the use of the corelist (-l) option. The patch
adjusts the docs to use -l EAL option instead of the -c option.
The patch only changes the docs and not the code as the -c option
will continue to exist unless it is removed in the future. The -c
option should be kept to maintain backward compatibility.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add two new commands "show port cap <port>" and "show
port cap all" to display what offload capabilities supported
in ports. It will not only display all the capabilities of
the port, but also the enabling condition for each capability
in the running time.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
command is: set vf vlan tag port_id vf_id on|off
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add command to call rte_pmd_i40e_set_vf_broadcast.
Add set vf broadcast in testpmd_funcs.rst file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF multicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF unicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
This patch fixes a trivial typo in testpmd application guide.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Below MACsec offload commands are added:
- set macsec offload <port_id> on encrypt on|off replay-protect on|off
- set macsec offload <port_id> off
- set macsec sc tx|rx <port_id> <mac> <pi>
- set macsec sa tx|rx <port_id> <idx> <an> <pn> <key>
Also update the testpmd user guide.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Rename tools/ into usertools/ to differentiate from buildtools/
and devtools/ while making clear these scripts are part of
DPDK runtime.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit exposes the following item fields through the flow command:
- VLAN priority code point, drop eligible indicator and VLAN identifier
(all part of TCI).
- IPv4 type of service, time to live and protocol.
- IPv6 traffic class, flow label, next header and hop limit.
- SCTP tag and checksum.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Document syntax, interaction with rte_flow and provide usage examples.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch fixes a trivial typo in testpmd application user guide.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The final parameter to rte_pmd_ixgbe_set_vf_vlan_insert is uint8_t
and treated as a binary flag when it needs to be a uint16_t
and treated as a VLAN id. The data sheet (sect 8.2.3.27.13) describes
the right most 16 bits as the VLAN id that is to be inserted; the
16.11 code is accepting only a 1 or 0 thus effectively only
allowing the VLAN id 1 to be inserted (0 disables the insertion
setting).
This patch changes the final parm name to represent the data that
is being accepted (vlan_id), changes the type to permit all valid
VLAN ids, and validates the parameter based on the range of 0 to
4095. Corresponding changes to prototype and documentation in the
.h file.
Fixes: 49e248223e9f71 ("net/ixgbe: add API for VF management")
Signed-off-by: E. Scott Daniels <daniels@research.att.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In mac-vlan mode, MAC address mask is not supported by HW.
The MAC address mask should not be set in mac-vlan mode.
Remove this parameter from the CLI. Remove MAC address
from mask print too.
Fixes: 53b2bb9b7ea7 ("app/testpmd: new flow director commands")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
add test for set vf vlan anti spoof
add test for set vf mac anti spoof
add test for set vf vlan stripq
add test for set vf vlan insert
add test for set tx loopback
add test for set all queues drop enable bit
add test for set vf split drop enable bit
add test for set vf mac address
add new APIs to testpmd help command.
add new APIs to the testpmd guide
Modify Makefile, add library rte_pmd_ixgbe to _LDLIBS-y.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Explain default testpmd behavior in mac fwd mode to remove
amiguity/confusion regarding user's ability to specify Ethernet
addresses.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Update the testpmd user guide with instructions for retrieving extended
NIC statistics.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Support to configure 25G and 50G speeds is missing from testpmd.
This patch also updates the testpmd user guide accordingly.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
"flowgen" forwarding mode has fixed packet size (300).
Let it re-use --txpkts option for specifying generated packet size.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The vdev eth_bond has been renamed to net_bond.
testpmd is creating a bonding device with the old prefix.
It is changed for consistency.
The script test-null.sh was failing because using the old name
for the null vdev.
Fixes also the bonding and testpmd doc.
Fixes: 2f45703c17ac ("drivers: make driver names consistent")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Introduce a new argument '--enable-lro' to ask testpmd to enable the LRO
feature on enabled ports, like it's done for '--enable-rx-cksum' for
instance.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The following tools may be installed system-wide.
It may be cleaner and more convenient to find them with the same
dpdk- prefix (especially for autocompletion).
Moreover, the script dpdk_nic_bind.py deserves a new name because it is
not restricted to NICs and can be used for e.g. crypto.
These files are renamed:
pmdinfogen -> dpdk-pmdinfogen
pmdinfo.py -> dpdk-pmdinfo.py
dpdk_pdump -> dpdk-pdump
dpdk_proc_info -> dpdk-procinfo
dpdk_nic_bind.py -> dpdk-devbind.py
setup.sh -> dpdk-setup.sh
The tools pmdinfogen, pmdinfo.py and dpdk_pdump are new in 16.07.
The scripts dpdk_nic_bind.py and setup.sh may have been used with
previous releases by end users. That's why a symbolic link still
provide the old name in the installed tools directory.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
- added VXLAN, GENEVE and NVGRE tunnel flow types
- added PORT flow type for accounting physical/virtual
port or channel number in flow creation
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch enables configurable tx_first burst number.
Use "start tx_first (burst_num)" to specify how many bursts of packets to
be sent before forwarding start, or "start tx_first" like before for the
default 1 burst send.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds retry option in testpmd to prevent most packet losses.
It can be enabled by "set fwd <mode> retry". All modes except rxonly
support this option.
Adding retry mechanism expands test case coverage to support scenarios
where packet loss affects test results.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
A previous patch modified the CLIs witout updating the examples.
Fixes: 53b2bb9b7ea7 ("app/testpmd: new flow director commands")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Port needs to be stopped and then closed before it can be detached,
but the documentation was only saying to close the port.
Also, both sections for port detaching and attaching has been reformatted
slightly, to show clearly how to use the commands.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
"port config all txqflags <value>" allows for
specifying txq_flags value in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
"port config all scatter on|off" allows for
controlling rxmode.enable_scatter in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This parameter allows for controlling rxmode.enable_scatter
which in turn allow for multi-segment packet receive tests.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
This patch extends the commands for changing flow director filter's input
set. It adds vlan as a possible filter input field.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch extends commands for changing a flow director filter's input
set. It adds tos, protocol and ttl as filter's input fields, and removes
the words selection from flex payloads.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add the CLIs to support the E-tag operation.
1, Offloading of E-tag insertion and stripping.
2, Forwarding the E-tag packets to pools based on the GRP and E-CID_base.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Add CLIs to config ether type of l2 tunnel, and to enable/disable
a type of l2 tunnel.
Now only e-tag tunnel is supported.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e
are also added.
It is an ABI break but ethdev library is already bumped for 16.04.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Remove **Contents** and |Today| from the rst doc index files since
these are already added automatically to PDF files and are of
little value to the Html files where the Contents is shown in a
sidebar.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Fixes: ab3257e13dc4 ("app/testpmd: add command to display queue info")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For CSUM forwarding mode add ability to copy & split outgoing packet
into the new mbuf that consists of multiple segments.
For TXONLY and CSUM forwarding modes add ability to make number of
segments in the outgoing packet to vary on a per packet basis.
Number of segments and size of each segment is controlled by
'set txpkts' command.
Split policy is controlled by 'set txsplit' command.
Possible values are: on | off | rand.
Tha allows to increase test coverage for TX PMD codepaths.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
After implementing the fdir new modes for x550, the CLIs are modified.
Forgot to update the related help info and doc.
Fixes: 53b2bb9b7ea7 ("app/testpmd: new flow director commands")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Test commands are added to support selecting different length of GRE key.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Test commands are added to support selecting input set, or adding
new input set per different pctype.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
This patch adds a command to display DCB info in ports.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
DPDK uses a structure to get or set a new hash key (see
eth_rte_rss_hash_conf). rss_hf field from this structure is used in
rss_hash_get_conf to retrieve the hash key and in rss_hash_update uses
it to verify the key exists before trying to update it.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Fix a number of RST issues in the testpmd user guide and
refactored the structure to:
* Remove redundant roadmap section.
* Merge Overview section into Introduction.
* Move "set fwd" to the start of its section.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The two examples of ethertype_filter in testpmd documentation
were missing the mac address field, so the example was incorrect.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
