X550 will do VxLAN & NVGRE RX checksum off-load automatically.
This patch exposes the result of the checksum off-load.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The names of function for tunnel port configuration are not
accurate. They're tunnel_add/del, better change them to
tunnel_port_add/del.
The old functions are directly replaced because the API and ABI
compatibility of ethdev are already broken in 16.04.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add functions to support l2 tunnel configuration and operations.
1, L2 tunnel ether type modification.
It means modifying the ether type of a specific type of tunnel.
So the packet with this ether type will be parsed as this type
of tunnel.
2, Enabling/disabling l2 tunnel support.
It means enabling/disabling the ability of parsing the specific
type of tunnel. This ability should be enabled before we enable
filtering, forwarding, offloading for this specific type of
tunnel.
3, Insertion and stripping for l2 tunnel tag.
4, Forwarding the packets to a pool based on l2 tunnel tag.
Only support e-tag tunnel now.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e
are also added.
It is an ABI break but ethdev library is already bumped for 16.04.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Many sample apps include internal buffering for single-packet-at-a-time
operation. Since this is such a common paradigm, this functionality is
better suited to being implemented in the ethdev API.
The new APIs in the ethdev library are:
* rte_eth_tx_buffer_init - initialize buffer
* rte_eth_tx_buffer - buffer up a single packet for future transmission
* rte_eth_tx_buffer_flush - flush any unsent buffered packets
* rte_eth_tx_buffer_set_err_callback - set up a callback to be called in
case transmitting a buffered burst fails. By default, we just free the
unsent packets.
As well as these, an additional reference callbacks are provided, which
frees the packets:
* rte_eth_tx_buffer_drop_callback - silently drop packets (default
behavior)
* rte_eth_tx_buffer_count_callback - drop and update user-provided counter
to track the number of dropped packets
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Several NICs can handle 512 entries/queues in their RETA table,
an 8 bit field is not large enough for them.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
slow-path data structures need not be 128-byte cache aligned.
Reduce the alignment to 64-byte to save the memory.
No behavior change for 64-byte cache aligned systems as minimum
cache line size as 64.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
RTE_PMD_DEBUG_TRACE was changed also to support pedantic flag,
but not completely.
the macro changed only under the RTE_LIBRTE_ETHDEV_DEBUG define,
but when RTE_LIBRTE_ETHDEV_DEBUG is not defined the old format
was left.
fix the macro to support pedantic flag in any case.
Fixes: b974e4a40cb5 ("ethdev: make error checking macros public")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
The functions rte_eth_rx_queue_count and rte_eth_descriptor_done are
supported by very few PMDs. Therefore, it is best to check for support
for the functions in the ethdev library, so as to avoid run-time crashes
at run-time if the application goes to use those APIs. Similarly, the
port parameter should also be checked for validity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The functions for rx/tx burst, for rx_queue_count and descriptor_done in
the ethdev library all had two copies of the code. One copy in
rte_ethdev.h was inlined for performance, while a second was in
rte_ethdev.c for debugging purposes only. We can eliminate the second
copy of the functions by moving the additional debug checks into the
copies of the functions in the header file. [Any compilation for
debugging at optimization level 0 will not inline the function so the
result should be same as when the function was in the .c file.]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move the function pointer and port id checking macros to rte_ethdev and
rte_dev header files, so that they can be used in the static inline
functions there. Also replace the RTE_LOG call within
RTE_PMD_DEBUG_TRACE so this macro can be built with the -pedantic flag
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add additional functions to support the existing IEEE1588
functionality.
* rte_eth_timesync_write_time(): set the device clock time.
* rte_eth_timesync_read_time(): get the device clock time.
* rte_eth_timesync_adjust_time(): adjust the device clock time.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
Use deprecated attribute to highlight any use of fields that
are marked as going away in the rte_ether device statistics.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The tx_rate unit is Mbps.
Gleaned from the ixgbe implementation, the 82599 datasheet and the use
in test-pmd.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Following the same approach taken with dev_started field
in rte_eth_dev_data structure, this patch adds two new fields
in it, rx_queue_state and tx_queue_state arrays, which track
which queues have been started and which not.
This is important to avoid trying to start/stop twice a queue,
which will result in undefined behaviour
(which may cause RX/TX disruption).
Mind that only the PMDs which have queue_start/stop functions
have been changed to update this field, as the functions will
check the queue state before switching it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The driver fields have been added the rte_eth_dev_data so that it is no
longer necessary access this data through the pci_dev pointer.
The following fields have been added to rte_eth_dev_data:
dev_flags, and macros for dev_flags.
kdrv
numa_node
drv_name
Add function rte_eth_copy_pci_info
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
[Thomas: remove useless flags]
Remove the deprecation tag and notice for imissed as it is a generic
register that accounts for packets that were dropped by the HW,
because there are no available mbufs (RX queues are full). imissed is
different to ierrors and can help with general debug.
Fixes: 49f386542af4 ("ethdev: remove driver specific stats")
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add the ability for the upper layer to query RX/TX queue information.
Add into rte_eth_dev_info new fields to represent information about
RX/TX descriptors min/max/alig nnumbers per queue for the device.
Add new structures:
struct rte_eth_rxq_info
struct rte_eth_txq_info
new functions:
rte_eth_rx_queue_info_get
rte_eth_tx_queue_info_get
into rte_etdev API.
Left extra free space in the queue info structures,
so extra fields could be added later without ABI breakage.
Add new fields:
rx_desc_lim
tx_desc_lim
into rte_eth_dev_info.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds one new API to get dcb related info.
rte_eth_dev_get_dcb_info
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Old flow director API have been replaced by rte_eth_dev_filter_ctrl
since release 2.0. And no driver in current code support these functions.
All the removed functions are listed below:
- rte_eth_dev_fdir_add_perfect_filter;
- rte_eth_dev_fdir_add_signature_filter;
- rte_eth_dev_fdir_get_infos;
- rte_eth_dev_fdir_remove_perfect_filter;
- rte_eth_dev_fdir_remove_signature_filter;
- rte_eth_dev_fdir_set_masks;
- rte_eth_dev_fdir_update_perfect_filter;
- rte_eth_dev_fdir_update_signature_filter;
The library version was already incremented in a previous patch.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: fix mlx4 and update release notes]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Fix for ABI breakage introduced in LRO addition. Moves
lro bitfield to the end of the struct/member.
Fixes: 8eecb3295aed (ixgbe: add LRO support)
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
The patch adds two dev_ops functions to enable and disable rx queue
interrupts.
In addition, it adds rte_eth_dev_rx_intr_ctl/rx_intr_q to support
per port or per queue rx intr event set.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Move #ifdef __cplusplus to the end of the file.
Fixes: 64b7acd861b1 ("ethdev: add multicast address filtering")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function rte_eth_dev_is_valid_port is good way to have all
drivers using same function and solves several hotplug related
bugs from drivers not checking attached flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The internal functions must be marked with the doxygen command @internal.
The allocate and release_port functions are not restricted only to dummy
drivers.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Remove non generic stats in rte_stats_strings and mark the relevant
fields in struct rte_eth_stats as deprecated.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
add new apis:
- rte_eth_dev_get_reg_length
- rte_eth_dev_get_reg_info
- rte_eth_dev_get_eeprom_length
- rte_eth_dev_get_eeprom
- rte_eth_dev_set_eeprom
to enable reading device parameters (register and
eeprom) based upon ethtool alike data parameter specification.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add new api:
- rte_eth_dev_default_mac_addr_set
The new api, rte_eth_dev_default_mac_addr_set, uses the
existing dev_op, mac_addr_set, to enable setting mac
addr from ethdev level.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change the order that user supplied RX and TX callbacks are called
to the order that they were added (fifo).
The previous calling order was the reverse of this (lifo) and was
counter intuitive for users.
Suggested-by: Robert Sanford <rsanford@akamai.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The patch fixes doxygen comments of below functions.
- rte_eth_dev_close()
Add description about when the function can be called and also about
what kind of resources will be freed.
- rte_eth_dev_detach()
Add description about when the function can be called.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add ethdev API to enable and read IEEE1588/802.1AS PTP timestamps
from devices that support it. The following functions are added:
rte_eth_timesync_enable()
rte_eth_timesync_disable()
rte_eth_timesync_read_rx_timestamp()
rte_eth_timesync_read_tx_timestamp()
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: merged with new macro VALID_PORTID_OR_ERR_RET]
To support querying hash key size per port, an new field of
'hash_key_size' was added in 'struct rte_eth_dev_info' for storing
hash key size in bytes.
The correct hash key size in bytes should be filled into the
'struct rte_eth_dev_info', to support querying it.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This path renames the mirror type in rte_eth_mirror_conf and macros,
and rework the mirror set in ixgbe drivers by using new definition.
It also fixes some coding style.
Test report: http://dpdk.org/ml/archives/dev/2015-June/019118.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Rename rte_eth_vmdq_mirror_conf to rte_eth_mirror_conf and move
the maximum rule id check from ethdev level to driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
It configures specific registers to enable double vlan stripping
on RX side and insertion on TX side.
The RX descriptors will be parsed, the vlan tags and flags will be
saved to corresponding mbuf fields if vlan tag is detected.
The TX descriptors will be configured according to the
configurations in mbufs, to trigger the hardware insertion of
double vlan tags for each packets sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The parameter tx_free_thresh is not consistent between the drivers:
some use it as rte_eth_tx_burst() requires, some release buffers when
the number of free descriptors drop below this value.
Let's use it as most fast-path code does, which is the latter, and update
comments throughout the code to reflect that.
Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
With the current PMD API, the receipt of multicast packets on a given
port can only be enabled by invoking the "rte_eth_allmulticast_enable"
function.
This method may not work on Virtual Functions in SR-IOV architectures
when the host PF driver does not allow such operation on VFs.
In such cases, joined multicast addresses must be individually added
in the set of multicast addresses that are filtered by the [VF] port.
For this purpose, a new function "set_mc_addr_list" is introduced
into the set of functions that are exported by a Poll Mode Driver.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: export new function in .map]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The ethdev header file includes the mbuf header file, but it does not
need to do so as it only uses pointers to the struct rte_mbuf type, and
does not use any of the mbuf internals, nor any of the mbuf functions or
macros. Therefore the inclusion is unnecessary, and can be replaced by a
forward declaration of the mbuf type.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
- Only x540 and 82599 devices support LRO.
- Add the appropriate HW configuration.
- Add RSC aware rx_pkt_burst() handlers:
- Implemented bulk allocation and non-bulk allocation versions.
- Add LRO-specific fields to rte_eth_rxmode, to rte_eth_dev_data
and to ixgbe_rx_queue.
- Use the appropriate handler when LRO is requested.
Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The ethernet device ops function table should be made const for
safety and security.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Added a parameter to the RX callback to pass in the number of
available RX packets in addition to the number of dequeued packets.
This provides the RX callback functions with additional information
that can be used to decide how packets from a burst are handled.
The TX callback doesn't require this additional parameter so the RX
and TX callbacks no longer have the same function parameters. As such
the single RX/TX callback has been refactored into two separate callbacks.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The data structure for the rx and tx callbacks is local to each process
since it contains function pointers and cannot be shared between
different unique binaries. However, because it is not in
rte_eth_dev_data structure, the array is not getting initialized for
secondary processes - neither is it getting appropriately resized if the
number of RX/TX queues changes. This causes crashes in secondary
processes as they dereference a null pointer in struct rte_eth_dev.
This patch fixes this by introducing an upper-bound on the number of
queues per port that can be configured, and then uses this to make the
array statically sized, thereby avoiding the crashes.
Fixes: 4dc294158cac ("ethdev: support optional Rx and Tx callbacks")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The pointer to struct eth_driver is not used and is already set
in struct rte_eth_dev.
It's a small cleanup in PMD API which probably needs more
attention to make clear what is a driver, a PCI driver, an
ethernet driver, etc.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These functions are used for attaching or detaching a port.
When rte_eth_dev_attach() is called, the function tries to realize the
device name as pci address. If this is done successfully,
rte_eth_dev_attach() will attach physical device port. If not, attaches
virtual devive port.
When rte_eth_dev_detach() is called, the function gets the device type
of this port to know whether the port is come from physical or virtual.
And then specific detaching function will be called.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This new parameter is needed to keep device type like PCI or virtual.
Port detaching processes are different between PCI device and virtual
device.
RTE_ETH_DEV_PCI indicates device type is PCI. RTE_ETH_DEV_VIRTUAL
indicates device is virtual.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
