The DPAA bus support code put out messages like:
dpaax: read_memory_node(): Unable to glob device-tree memory node:
(/proc/device-tree/memory[@0-9]*/reg)(3)
dpaax: PA->VA translation not available;
dpaax: Expect performance impact.
These are unnecessary and likely to confuse the end user.
Fix this by doing nothing if bus is empty.
Fixes: 5a7dbb934d ("dpaa: enable dpaax library")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
NDIS multi-queue support is only in WS2012 or later. Check the NDIS
version to limit to single queue on older versions. Similar code
exists in Linux driver.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Make DPDK enable SRIOV flag in same way as Linux and FreeBSD.
Fixes: dc7680e859 ("net/netvsc: support integrated VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
When using multiple queues, there was a race with the kernel
in setting up the second channel. This regression is due to a kernel change
which does not allow accessing sysfs files for Hyper-V channels that are not opened.
The fix is simple, just move the logic to detect not ready
sub channels earlier in the existing loop.
Fixes: 831dba47bd ("bus/vmbus: add Hyper-V virtual bus support")
Cc: stable@dpdk.org
Reported-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
When rte_log_register_type_and_pick_level() has been introduced, it has
been correctly added to the EXPERIMENTAL section of the eal map and the
symbol itself has been marked at its definition.
However, the declaration of this symbol in rte_log.h is missing the
__rte_experimental tag.
Because of this, a user can try to call this symbol without being aware
this is an experimental api (neither compilation nor link warning).
Fixes: b22e77c026 ("eal: register log type and pick level from args")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Prior to this patch, the two affected .c files include <dirent.h>
unnecessarily. This commit removes the include lines.
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
We already changed to use generic IPC in pdump since below commit:
commit 660098d61f ("pdump: use generic multi-process channel")
The `rte_pdump_set_socket_dir()`, the `path` parameter of
`rte_pdump_init()` and the `enum rte_pdump_socktype` have been
deprecated since then. This commit removes these deprecated
APIs and also bumps the pdump ABI.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
In commit 7dd34c71de ("usertools: install with meson") meson.build was
added in usertools directory and so it's copied to $(datadir)/usertools
with "make install".
This patch avoids to copy meson.build when installing usertools with
"make install".
Fixes: 7dd34c71de ("usertools: install with meson")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch makes the configuration based on makefile and the
configuration based on meson to be the same.
Fixes: c6e536e384 ("build: add more implementers IDs and PNs for ARM")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Following Marvell's acquisition of Cavium, we need to update all the
Cavium maintainer's entries to point to our new e-mail addresses.
Update maintainers as they are no longer working for Cavium.
Thanks to Harish Patil for his support and development of our various
dpdk drivers.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
This RPM recipe is not well maintained and probably not used a lot.
Each distribution has its own constraints and recipes.
It may not be a good idea to try maintaining packaging recipes in
the project itself.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Before this patch, there are two functions will call
i40e_dev_free_queues to free queues. For rte_eth_dev_close(), its
redundant because of duplication. For rte_eth_dev_reset() its
redundant because of not necessary, since following dev_configure
is required after dev_reset and it will be updated correctly.
This patch removes redundant code in i40e_dev_free_queues().
Fixes: 6b45371283 ("i40e: free queue memory when closing")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This reverts
commit 09a62d7569 ("net/i40e: fix offload not supported mask")
Contrary to what is said in above patch commit log,
I40E_TX_OFFLOAD_NOTSUP_MASK is the mask of Tx offload bits that are part
of PKT_TX_OFFLOAD_MASK but not included in I40E_TX_OFFLOAD_MASK.
Above patch erroneously includes all PKT_RX_OFFLOAD_ bits in the
I40E_TX_OFFLOAD_NOTSUP_MASK, this is not what is expected.
Restore the initial xor that gives the expected result.
Fixes: 09a62d7569 ("net/i40e: fix offload not supported mask")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixes a missed bracket bug in the code.
Fixes: e1d90eaa83 ("examples/vhost_crypto: fix zero copy")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Flags could be updated in a separate process leading to the
inconsistent check.
Additionally, read marked as 'volatile' to highlight the shared
nature of the variable and avoid such issues in the future.
Fixes: d3211c98c4 ("vhost: add helpers for packed virtqueues")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When a guest is spanned on multiple NUMA nodes and
multiple Virtio devices are spanned onto these nodes,
we expect that their ring memory is allocated in the
right memory node.
Otherwise, vCPUs from node A may be polling Virtio rings
allocated on node B, which would increase QPI bandwidth
and impact performance.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
If mmap() call fails in vhost_user_set_mem_table, dev->mem
is set to NULL. If later, qva_to_vva() is called, a segfault
occurs.
Fixes: 8f972312b8 ("vhost: support vhost-user")
Cc: stable@dpdk.org
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Since below commit, several tx_prep functions are broken, they fail to
pass supported Tx offload features check:
PKT_TX_IPVx must be set when any PKT_TX_L4 checksum is requested,
but these values are not present in the mask of supported Tx offloads
of several drivers that advertise PKT_TX_L4_MASK.
So any packet sent to those drivers with a L4 checksum request and
one of PKT_TX_IPVx bit set is rejected by the tx prepare function.
Fixes: 1037ed842c ("mbuf: fix Tx offload mask")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch introduces changes for supporting multiprocess support.
This is trivial for VFs but comes with some limitations for the PF.
Due to restrictions when using NFP CPP interface, just one secondary
process is supported by now for the PF.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The VIC hardware has 64 MAC filters per vNIC, which can be either
unicast or multicast. Use one half for unicast and the other half for
multicast, as the VIC kernel drivers for Linux and Windows do.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Cisco VIC adapters run firmware. Add the fw_version_get handler to
help diagnostics.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so rte_eth_dev_close() can
later free port resources including mac_addrs.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
When multiple Chelsio adapters are present, the current naming
convention of using underlying physical port number of the adapter
creates conflicts when allocating control queue mbuf pool for
multiple adapters and hence results in allocation failure. Fix by
using port_id from rte_eth_dev_data, instead of physical port number.
Fixes: 3a3aaabc7c ("net/cxgbe: add control queue to communicate filter requests")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
testpmd actions set_tp_src and set_tp_dst documentation adds the
of_ prefix to action names, while the implementation doesn't add it.
This patch removes the prefix from action names in testpmd
documentation.
Fixes: 9ccc949195 ("ethdev: add flow API actions to modify TCP/UDP port numbers")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
This patch fixes a typo in testpmd guide (should be ICMP and not IMCP).
Fixes: ac718398f4 ("doc: testpmd application user guide")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
In function cmd_set_mplsogre_encap_parsed(), MPLS label value was
set in mplsogre_encap_conf struct without the required offset.
As a result the value was copied incorrectly into
rte_flow_item_mpls struct.
This patch sets MPLS label value in appropriate location at
mplsogre_encap_conf struct, so it is correctly copied to
rte_flow_item_mpls struct.
Fixes: 3e77031be8 ("app/testpmd: add MPLSoGRE encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
In function cmd_set_mplsoudp_encap_parsed(), MPLS label value was
set in mplsoudp_encap_conf struct without the required offset.
As a result the value was copied incorrectly into
rte_flow_item_mpls struct.
This patch sets MPLS label value in appropriate location at
mplsoudp_encap_conf struct, so it is correctly copied to
rte_flow_item_mpls struct.
Fixes: a1191d39cb ("app/testpmd: add MPLSoUDP encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Function mlx5_ctrl_flow_vlan() is used to set the rss rule in
MLX5 PMD, using priv->reta_idx_n as number of Rx queues.
This number is passed to mlx5_flow_validate_action_rss(), which
attempts to access the Rx queues at priv->rxqs.
In case priv->rxqs_n is 0, priv->rxqs is empty, and
mlx5_flow_validate_action_rss() will crash with segmentation fault.
priv->reta_idx_n can never be 0, even if priv->rxqs_n is set to 0.
But when priv->rxqs_n is set to 0, setting the rss rule is invalid.
This patch updates mlx5_ctrl_flow_vlan(), if priv->rxqs_n is 0 the
function will fail with EINVAL errno.
Fixes: 8086cf08b2 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Port reset will call i40evf_uninit_vf() to release resource. It wants
to call i40evf_dev_close() to release resources. Before this patch,
hw->adapter_stopped was used to mark the status about start/stop and
close. So it will never call i40evf_dev_close() after stopping the port.
This patch added hw->adapter_closed flag in i40evf_dev_close() and
i40e_dev_close() to control the status of close.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When starting the device, the RSS table is initialized. So the RSS
update before device_start would be overwritten. This patch allows users
to update the RSS reta table before device_start.
Fixes: db5b65301d ("ethdev: allow to set RSS hash computation flags and/or key")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When starting the device, the RSS table is initialized. So the RSS
update before dev_start would be overwritten. This patch allows users
to update the RSS reta table before dev_start and adjusts the order
to set entries sequentially.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Device can't function properly with a firmware that is in recovery
mode.
Check the firmware status at initialization time. If the firmware is
in recovery mode, alert the user to check it.
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RSS hash configure get API (i40e_dev_rss_hash_conf_get()) didn't check
the return value of i40e_get_rss_key().
i40e_dev_rss_hash_conf_get() will return success even getting RSS hash
key failed. This patch fixes the issue.
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The struct should be ifcvf_net_config other than ifcvf_net_device_config
The variable is used as named opaque variable, struct fields are not
accessed at all, so using wrong struct type has no effect but it should
be fixed.
Fixes: a3f8150eac ("net/ifcvf: add ifcvf vDPA driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
tso and vlan parameters were removed from the signature
of txq_mbuf_to_swp function.
The documentation of the function was not updated accordingly.
Remove the tso and vlan documentation to match the function signature.
Fixes: 8f6d9e13a9 ("net/mlx5: remove redundant checks")
Cc: stable@dpdk.org
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If bond_ethdev_rx_burst() called more times with no active slaves
the active slave index will point out of bounds, resulting in a
segfault.
The configured slaves needs to be checked, and if none became active
there is no point going further.
Do not start the packet processing threads until all configured
slaves become active.
Fixes: cc7e8ae84f ("examples/bond: add example application for link bonding mode 6")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
Queue setup will fail if called before adding slaves.
Fixes: 7a0665940f ("net/bonding: inherit descriptor limits from slaves")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
The Bottom-of-Stack (bos) bit of MPLS indicates
whether its the last MPLS layer (1) or not (0).
Indicating that the encapsulating MPLS is the
last MPLS layer in the packet as the default
behavior is more appropriate since multiple
encapsulation actions is not supported.
Fixes: 3e77031be8 ("app/testpmd: add MPLSoGRE encapsulation")
Fixes: 3e77031be8 ("app/testpmd: add MPLSoGRE encapsulation")
Fixes: a1191d39cb ("app/testpmd: add MPLSoUDP encapsulation")
cc: stable@dpdk.org
Signed-off-by: Saleh Alsouqi <salehals@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
If vdev_netvsc is run with debug logging enabled, then the
log output will fill with:
net_vdev_netvsc: interface lo is non-ethernet device
Remove the message since it is not useful.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matan Azrad <matan@mellanox.com>
Reduced number of INFO logs in BNX2X PMD by converting some INFO
logs to DEBUG and few NOTICE logs to INFO, removing extra new lines,
printing banner bar once for the adapter and device specific info.
Fixes: ba7eeb035a ("net/bnx2x: fix logging to include device name")
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The imissed counters (number of packets dropped because the queues were
full) were actually reported through xstats as "rx_out_of_buffer"
but was not reported through stats.
Following a recent discussion on the ML, as there is no way to tell the
user if a counter is implemented or not, this should be considered a
bug. For example, user looking at imissed will think the packets are
lost before reaching the device.
Signed-off-by: Tom Barbette <barbette@kth.se>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
ixgbe is able to recognize 1G SX and LX id, but it is missing the LHA.
Add it, so that it can handle LHA SFP plugin.
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Take the 'other interrupt' into account when setting up
MSI-X interrupts and use the proper mask when enabling it.
Also, rearm the MSI-X vector after the LSC interrupt fires.
This change allows both LSC and RXQ interrupts to work at
the same time when using MSI-X interrupts.
Cc: stable@dpdk.org
Signed-off-by: Timmons C. Player <timmons.player@spirent.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
The incriminated commit did relax the condition to catch all sections
but dropped the + removal which can trigger false detection of the
special EXPERIMENTAL section when adding symbols and the section in the
same patch.
Fixes: 7281cf520f ("devtools: relax rule for identifying symbol section")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
It does not hurt reporting the incriminated section.
Before:
ERROR: symbol rte_plop is added in a section other than the EXPERIMENTAL
section of the version map
After:
ERROR: symbol rte_plop is added in the DPDK_19.02 section, but is
expected to be added in the EXPERIMENTAL section of the version map
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Some comments are added to encourage classifying API and ABI changes
with scope labels.
The section "removed items" is moved just after the "new features".
The sample for shared library versions is replaced with foo/bar names.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
