Maximum number of packets per 64k buffer should be rounded up
when calculating number of credits by event queue size.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
In the case of packed stream real size of the buffer does not fit in
Rx descriptor byte count. Real size is specified on Rx queue setup.
Non-zero fake should be used to bypass hardware checks.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Packed stream Rx datapath requires access to packed stream state
stored in event queue. Number of credits is upstead in event handler
on a new buffer, packets parsing on 64k boundary crossing and
Rx doorbell push to give credits back.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Apply check against firmware maximum just before pushing.
However, it does not save from overflow inside firmware,
if firmware still have some credits.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
There is no point to add mask plus one before mask applying since it
still does not help to avoid overflow on subtract. Modulo mask
arithmetic works perfectly for unsigned integers of the same type.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
fix PreFAST issue, add missing annotation that function return value
should not be ignored. Fix alignment.
Fixes: 19b64c6ac35f ("net/sfc/base: import libefx base")
Cc: stable@dpdk.org
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The checking performed in the ->envo_type_to_partn
internal method make these assertions unnecessary.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Read existing flash content before writing, so the flash write can be
avoided if the existing partition content matches the new image. This
avoids unnecessary write cycles for the flash device, and may also be
faster. If the flash does need to be updated, verify the content after
writing.
Note that reading the flash content after writing but before calling
efx_nvram-rw_finish() avoids firmware bug68170, which can lead to
signed image updates failing on Medford.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If the firmware reports a non-zero write chunk size then nvram writes
may fail if a different granularity is used (e.g. for MUM firmware on
Sorrento).
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tracking which partition is locked avoids being overly conservative
when EFX_NVRAM_xxx maps to more than one partition (depnding on the
current port number).
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The existing name confuses support for secure boot with
support for reporting a verify result after an NVRAM update.
As the capability only reports support for returning a verify
result, change the name to be less confusing.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Extend efx_nvram_rw_finish() to return firmware verify result code.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This makes the verify result visible to efx_nvram_rw_finish(), which
can be extended to report it in a later patch.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Simplify verify result handling in NVRAM update finish
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Pushing TSO option descriptors is unsafe if pacer bypass is enabled,
so to make sure that doesn't happen never push TSO option descriptors.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Tx queue prefetch, host and writeback thresholds are used for
performance fine-tuning and not applicable to Solarflare NICs.
It is safe to just log warning and do not fail Tx queue setup
to be more friendly to DPDK applications which hardcode it.
Fixes: b1b7ad933b39 ("net/sfc: set up and release Tx queues")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Rx queue prefetch, host and writeback thresholds are used for
performance fine-tuning and not applicable to Solarflare NICs.
It is safe to just log warning and do not fail Rx queue setup
to be more friendly to DPDK applications which hardcode it.
Fixes: ce35b05c635e ("net/sfc: implement Rx queue setup release operations")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The function rte_malloc_virt2phy() is renamed to rte_malloc_virt2iova().
The deprecated name is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Tx reap mechanism on EF10 native datapath was altered by one
of the recent patches to introduce performance optimisations
using the common technique of freeing mbuf segments in bulks.
From this perspective, the way of associating SW descriptors
with individual mbuf segments rather than with whole packets
was adopted as a key requirement for the entire optimisation.
However, only the fast path reap function was amended to fit
the new scheme whilst the corresponding function on the port
stop path was left intact by mistake. This implies incorrect
usage of rte_pktmbuf_free() with regard to separate segments
rather than calling rte_pktmbuf_free_seg() and must be fixed.
Fixes: d321954343c8 ("net/sfc: free mbufs in bulks on EF10 native Tx reap")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
In order to achieve reproducible builds, always use the same
order when listing files for compilation.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previously, to get MFN address in dom0, this API is a wrapper to
obtain the "physical address".
As we will removed xen dom0 support, this API is not necessary.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The callback must not attempt to program RSS table to the HW
in non-started state; the new table must be remembered and
applied on the next start
Fixes: 32bcfb0a50b1 ("net/sfc: update RSS redirection table")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Update efx_rx_scale_mode_set(), efx_rx_scale_key_set()
and efx_rx_scale_tbl_set().
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
