If a vhost device is closed before eth_dev_configure is done
to the device, internal resources allocated to the device
would not be freed. This patch fixes it.
Fixes: 3d01b759d2 ("net/vhost: delay driver setup")
Cc: stable@dpdk.org
Signed-off-by: Itsuro Oda <oda@valinux.co.jp>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
With this patch, the promiscuous and multicast fields are initialized as
enabled for vhost PMD by default, this allows the devices to be used
when running applications that attempt to enable promiscuous or
multicast mode.
Similar things have done for other virtual PMDs by commit f165210321
("drivers/net: enable promiscuous and multicast by default")
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Added vHost PMD arguments 'linear-buffer' and 'ext-buffer'
to configure 'RTE_VHOST_USER_LINEARBUF_SUPPORT' and
'RTE_VHOST_USER_EXTBUF_SUPPORT' flags in the vhost library
Signed-off-by: Sivaprasad Tummala <sivaprasad.tummala@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Ethdev's .dev_configure callback can be called multiple
time during a device life-time, but Vhost makes the
wrong assumption that it is not the case and try to
setup again the device on reconfiguration.
This patch ensures the device hasn't been already setup
before proceeding.
Fixes: 3d01b759d2 ("net/vhost: delay driver setup")
Cc: stable@dpdk.org
Reported-by: Yinan Wang <yinan.wang@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
If for some reason vhost_driver_setup() fails, the list
element for the device may be freed without being removed
from the internal list of devices.
This patch fixes all the error paths, by unregistering the
device from Vhost library it has been registered, remove
the device from the list, reset device vring_state pointer
from the global table and only free vring state if it had
been allocated.
Fixes: 3d01b759d2 ("net/vhost: delay driver setup")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
This patch removes an unused member from pmd_internal.
Signed-off-by: Itsuro Oda <oda@valinux.co.jp>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds lacking member setting and makes secondary
probe complete.
Fixes: 4852aa8f6e ("drivers/net: enable hotplug on secondary process")
Cc: stable@dpdk.org
Signed-off-by: Itsuro Oda <oda@valinux.co.jp>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Vhost driver setup is delayed at eth_dev configuration
in order to be able to set it from a secondary process.
Fixes: 4852aa8f6e ("drivers/net: enable hotplug on secondary process")
Cc: stable@dpdk.org
Signed-off-by: Itsuro Oda <oda@valinux.co.jp>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch allocates iface_name of pmd_internal from heap
in order to be able to refer from secondary processes.
Fixes: 4852aa8f6e ("drivers/net: enable hotplug on secondary process")
Cc: stable@dpdk.org
Signed-off-by: Itsuro Oda <oda@valinux.co.jp>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The function eth_dev_vhost_create() could return errors,
the return value need to be checked.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
TSO (TCP Segmentation Offload) is enabled by default on vhost.
Add the ability to disable TSO on vhost.
The user should also disable the feature on the virtual machine's xml.
Signed-off-by: Noa Ezra <noae@mellanox.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Matan Azrad <matan@mellanox.com>
In some situations, when a virtual machine is starting,
vring_state_changed can be called while there was no change in the
queue state. This fix makes sure that there was really a change in the
queue state before calling the callback for EVENT_QUEUE_STATE.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Cc: stable@dpdk.org
Signed-off-by: Noa Ezra <noae@mellanox.com>
Reviewed-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
missed_pkts reflects the number of packets that the driver did not manage
to send.
This is a temporary situation, those packets are not freed and the
application can still retry to send them later.
Hence, we can't count them as transmit failed.
Fixes: 5f05e95cd5 ("net/vhost: fix Tx error counting")
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The rte_vdev_driver is declared twice.
The first one is not necessary.
Fixes: 050fe6e9ff ("drivers/net: use ethdev allocation helper for vdev")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For each driver where we optionally disable it, add in the reason why it's
being disabled, so the user knows how to fix it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private
resources for the port can be freed by rte_eth_dev_close().
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The common data freeing has been moved to rte_eth_dev_release_port(),
so freeing mac_addrs like this in eth_dev_close() is unnecessary and
will cause double free.
Fixes: e16adf08e5 ("ethdev: free all common data when releasing port")
Cc: stable@dpdk.org
Signed-off-by: Hideyuki Yamashita <yamashita.hideyuki@po.ntt-tx.co.jp>
Signed-off-by: Yasufumi Ogawa <ogawa.yasufumi@lab.ntt.co.jp>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
After previous changes, the function rte_eth_dev_release_port()
can be used for primary or secondary process as well.
The only difference with rte_eth_dev_release_port_secondary()
is the shared lock used in rte_eth_dev_release_port().
The function rte_eth_dev_release_port_secondary() was recently
added in 18.11 cycle.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Introduce a new postcopy-support parameter to Vhost PMD that
passes the RTE_VHOST_USER_POSTCOPY_SUPPORT flag at vhost
device register time.
Flag should only be set if application does not prefault guest
memory using, for example, mlockall() syscall.
Default value is 0, meaning that postcopy support is disabled
unless specified explicitly.
Example to enable postcopy support for a given device:
--vdev 'net_vhost0,iface=/tmp/vhost-user1,postcopy-support=1'
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Attach port from secondary should ignore devargs since the private
device is not necessary to support. Also previously, detach port on
a secondary process will mess primary process and cause the same
device can't be attached back again. A secondary process should use
rte_eth_dev_release_port_secondary to release a port.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Calling rte_eth_dev_info_get() on secondary process cause a crash
because eth_dev->device is not set properly.
Fixes: ee27edbe0c ("drivers/net: share vdev data to secondary process")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
A number of drivers have dependencies on libraries which
are only built on Linux, and so they need to be disabled
on FreeBSD. Rather than basing the disabling on OS, in
each case we base the building of the library on the
presence of the required dependency.
Fixes: 50385c1060 ("net/ifc: add to meson build")
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Fixes: 5936aa3a39 ("net/vhost: add to meson build")
Fixes: 3298fa4853 ("raw/dpaa2_cmdif: introduce DPAA2 command interface driver")
Fixes: b1ee472fed ("raw/dpaa2_qdma: introduce the DPAA2 QDMA driver")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The ol_flags of mbufs returned by rte_vhost_dequeue_burst()
contain necessary offload information. It can't be zeroed.
Fixes: f63d356ee9 ("net/vhost: insert/strip VLAN header in software")
Cc: stable@dpdk.org
Reported-by: Lei Yao <lei.a.yao@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
A new hook function is added and called inside the PMDs at the end
of the device probing:
- in primary process, after allocating, init and config
- in secondary process, after attaching and local init
This new function is almost empty for now.
It will be used later to add some post-initialization processing.
For the PMDs calling the helpers rte_eth_dev_create() or
rte_eth_dev_pci_generic_probe(), the hook rte_eth_dev_probing_finish()
is called from here, and not in the PMD itself.
Note that the helper rte_eth_dev_create() could be used more,
especially for vdevs, avoiding some code duplication in PMDs.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
rte_eth_vhost_get_vid_from_port_id returns a value of 0 if
called before the first call to the new_device callback.
A vid value >=0 suggests the device is active which is not
the case in this instance. Initialise vid to a negative
value to prevent this.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Cc: stable@dpdk.org
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Use dynamic log type (instead of PMD) in vhost.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
dpdk-procinfo, as a secondary process, cannot fetch stats for vdev.
This patch enables that by attaching the port from the shared data.
We also fill the eth dev ops, with only some ops works in secondary
process, for example, stats_get().
Note that, we still cannot Rx/Tx packets on the ports which do not
support multi-process.
Reported-by: Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
We introduced private rte_eth_dev_data to allow vdev to be created
both in primary process and secondary process(es). This is not
friendly to multi-process model, for example, it leads to port id
contention issue if two processes both find the data entry is free.
And to get stats of primary vdev in secondary, we must allocate
from the pre-defined array so that we can find it.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
In some cases we want vhost dequeue work in interrupt mode to
release cpus to others when no data to transmit. So we install
interrupt handler of vhost device and interrupt vectors for each
rx queue when creating new backend according to vhost interrupt
configuration. Thus, applications could register a epoll event fd
to associate rx queues with interrupt vectors.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
dev_start sets *dev_attached* after setup queues, this sets device to
invalid state since no frontend is attached. Also destroy_device set
*started* to zero which makes *allow_queuing* always zero until dev_start
get called again. Actually, we should not determine queues existence by
*dev_attached* but by queues pointers or other separated variable(s).
Fixes: 30a701a537 ("net/vhost: fix crash when creating vdev dynamically")
Cc: stable@dpdk.org
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Tested-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This lets the vhost driver handle the VLAN header like the virtio driver
in software.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When creating vdev dynamically, vhost pmd driver starts directly without
checking TX/RX queues are ready or not, and thus causes segmentation fault
when vhost library accesses queues. This patch adds a flag to check whether
queues are setup or not, and adds queues setup into dev_start function to
allow user to start them after setting up.
Fixes: aed0b12930 ("net/vhost: fix socket file deleted on stop")
Cc: stable@dpdk.org
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Tested-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The original words are not accurate. For example, as destroy_device
callback gets called, it does not necessarily mean that the connection
is closed.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad0 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
