Only full mask (0xffff) is accepted, there is no way to specify a mask
for layer 4 ports to the kernel using TC rules.
Fixes: de96fe68ae ("net/tap: add basic flow API patterns and actions")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
This patch fixes a trivial typo in i40e documentation;
The comment about the behavior upon DPDK application quit was wrongly
titled as "after DPDK application exist" instead of "after DPDK
application exit", and this trivial patch fixes it.
Fixes: edf1b61831 ("doc: add limitations for i40e PMD")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Remove unnecessary interface queries and the Resource Domain when
creating the Queue Pair. Since mlx5 PMD data path is on top of native
APIs, such Verbs library calls are no longer needed.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Currently mlx5_dev_rss_reta_update() just updates tables in the host,
therefore it isn't immediately effective until restarting the device by
calling mlx5_dev_stop()/mlx5_dev_start() to update the changes in the
device side. This patch adds rebuilding the device-specific data
structure and applying it to the device right away.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
When querying and updating RSS RETA table, it always uses the max size of
the device instead of configured value. This patch fixes it and removed the
related comments in the code.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
In rte_eth_check_reta_mask(), it is required to align the size of the RETA
table to RTE_RETA_GROUP_SIZE but as the size can be less than the limit,
this should be removed. The change is also applied to a command of testpmd.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
If the primary process has initialized all the queues to vector
pmd mode, the secondary process should not use scalar code path,
because the per queue data structures haven't been prepared for
that, e.g. txq->ops is for vector Tx rather than scalar Tx.
Fixes: a6ce64a975 ("fm10k: introduce vector driver")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The QinQ filter uses big buffers, set the big_buffer flag
when restoring a QinQ filter.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The QinQ filter uses big buffers, set the big_buffer flag
when removing a QinQ filter.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add i40e_cloud_filter_qinq_create function, and call it
from i40e_dev_consistent_tunnel_filter_set function.
Replace the Outer IP filter with the QinQ filter.
QinQ allows multiple VLAN tags to be inserted into a single Ethernet
frame. A QinQ frame is a frame that has two VLAN 802.1Q headers.
802.1Q tunneling (QinQ) is a technique often used by Metro Ethernet
providers as a layer 2 VPN for customers.
Signed-off-by: Laura Stroe <laura.stroe@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The L3 MAP register is initialised to support QinQ
cloud filters.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Mark ID in the completion queue entry is 24 bits, the remaining 8 bits are
reserved and may be nonzero. Do not take them into account when looking for
marked packets.
Fixes: ea3bc3b1df ("net/mlx5: support mark flow action")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Device reconfigure should be done without close which releases
all transmit and receive queue. ethdev API assumes that previously
setup queues (minimum from configured before and now) are kept
across device reconfigure.
Fixes: aaa3f5f0f7 ("net/sfc: add configure and close stubs")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Fixes: a8ad8cf83f ("net/sfc: provide basic stubs for Tx subsystem")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Prepare to fix device reconfigure. Make it clear that corresponding
functions should be called on device configure and close operations.
No functional change.
Fixes: a8ad8cf83f ("net/sfc: provide basic stubs for Tx subsystem")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Prepare to fix device reconfigure. Make it clear that corresponding
functions should be called on device configure and close operations.
No functional change.
Fixes: a8e64c6b45 ("net/sfc: implement Rx subsystem stubs")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Port configuration should be initialized on attach to avoid reset to
defaults on device reconfigure.
Fixes: 03ed21195d ("net/sfc: minimum port control sufficient to receive traffic")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Prepare to fix device reconfigure.
Device arguments should be parsed once on attach.
Management event queue should be initialized once on attach.
Fixes: 58294ee65a ("net/sfc: support event queue")
Fixes: c22d3c508e ("net/sfc: support parameter to choose performance profile")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
EvQ info array keeps information about EvQ centralized, however
EvQ pointers are available in TxQ and RxQ structures. Single
array for all EvQs complicates device reconfigure handling, so
simply git rid of it.
It removes notion of EvQ software index since there is no EvQ
array in software any more.
Fixes: 58294ee65a ("net/sfc: support event queue")
Fixes: 9a75f75cb1 ("net/sfc: maintain management event queue")
Fixes: ce35b05c63 ("net/sfc: implement Rx queue setup release operations")
Fixes: 28944ac098 ("net/sfc: implement Rx queue start and stop operations")
Fixes: b1b7ad933b ("net/sfc: set up and release Tx queues")
Fixes: fed9aeb46c ("net/sfc: implement transmit path start / stop")
Fixes: 3b809c27b1 ("net/sfc: support link status change interrupt")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Next step to get rid of EvQ info at all.
Fixes: c22d3c508e ("net/sfc: support parameter to choose performance profile")
Fixes: 3b809c27b1 ("net/sfc: support link status change interrupt")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
EvQ info array is a problem on device reconfigure when number of
Rx and Tx queues may change. It is a step to get rid of it.
Fixes: 58294ee65a ("net/sfc: support event queue")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The index of an event queue index is computed from the index of the
corresponding transmit or receive queue, and depends on the total
number of receive queues. As a consequence, the index of an event
queue bound to a transmit queue changes if the total number of
receive queues is changed.
Fixes: 58294ee65a ("net/sfc: support event queue")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Make it clear that corresponding functions should be called on device
configure and close operations. No functional change.
Fixes: 06bc197796 ("net/sfc: interrupts support sufficient for event queue init")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If Tx datapath does not support TSO, TSO was dropped on device configure.
It is incorrect to change advertised offloads.
Fixes: 7a4d44a639 ("net/sfc: make TSO a datapath-dependent feature")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Datapath choice requires NIC capabilities knowledge and, therefore,
should be done after probe. Whereas NIC resources estimation needs
to know chosen datapath (e.g. if Tx datapath is going to use TSO).
Fixes: df1bfde4ff ("net/sfc: factor out libefx-based Rx datapath")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Put to mempool does not free chained segments.
Fixes: e0b063941e ("net/sfc: support scattered Rx DMA")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
MPLSoUDP & MPLSoGRE is not supported by tunnel
filter due to limited resource of HW, this patch
enables MPLS tunnel filter by replacing inner_mac
filter.
This configuration will be set when adding MPLSoUDP
and MPLSoGRE filter rules, and it will be invalid
only by NIC core reset.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch add MPLS parsing function to support MPLS filtering.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch exposes the following item fields through the flow command:
- MPLS label
- GRE protocol
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds MPLS and GRE items to generic rte flow.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
First segment size must be at least 18 bytes, packets not respecting this
are silently not sent by the NIC but counted as sent by the PMD. The only
way to figure out is compiling the PMD in debug mode.
Fixes: 6579c27c11 ("net/mlx5: remove gather loop on segments")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The driver can handle dynamic MTU change without needing the port to be
stopped explicitly by the application. However, there is currently no
check to prevent I/Os from happening on a different thread while the
port is going thru' reset internally. This patch fixes this issue by
assigning RX/TX burst functions to a dummy function and also reconfigure
RX bufsize for each rx queue based on the new MTU value.
Fixes: 200645ac79 ("net/qede: set MTU")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
The newer SR-IOV PF drivers expects RX/TX queues to be created before
applying RSS configuration. This patch addresses this requirement by
deferring RSS configuration till the queues are created. Even though
this issue is only seen in SR-IOV context, the changes will be made
applicable to PF also to keep the behavior consistent between VF/PF.
Fixes: 7ab35bf6b9 ("net/qede: fix RSS")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Both UDP and TCP based RSS offload types are supported by the device.
This patch adds UDP protocol which got missed out in the original patch.
Fixes: 4c98f2768e ("net/qede: support RSS hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch is to add testpmd CLI for getting all loaded DDP profiles.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add i40e_tunnel_type enumeration type to refine consistent
tunnel filter, it will be esay to add new tunnel type for
i40e.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Previously, only tunnel filter to PF is supported.
This patch adds i40e_dev_consistent_tunnel_filter_set
function for consistent filter API to support tunnel
filter to VF.
Signed-off-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Change tunnel filter function name to VXLAN filter
function, prepare for other tunnel filter function.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
