Currently, the application does support running without the power
library being initialized, but it has to be specifically requested. On
platforms without support for frequency scaling using the power library,
we can just enable interrupt-only mode by default.
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
In addition to existing modes, add a mode which is very similar to
legacy mode, but does not do frequency scaling, and thus does not
depend on the power library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Currently, legacy mode is the implicit default, but it is not possible
to directly request using legacy mode. Add the argument to enable
requesting legacy mode, and also make it the default.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, l3fwd-power will attempt to run even if the power env
is set to KVM, which is not supported. Fix this by preventing the
app from initializing unless the env is set to one of the supported
modes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Currently, interrupts are enabled in telemetry and empty poll modes, but
they are not used. Switch to disabling interrupts by default, and only
enable interrupts for modes that require them.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
The 'restrict' keyword is recognized in C99, while type qualifier
'__restrict' compiles ok in C with all language levels. This patch
is to replace the existing 'restrict' with '__rte_restrict' which
is a common wrapper supported by all compilers.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding per core packet handling stats to analyze traffic distribution
when multiple cores are engaged.
Since aggregating the packet stats across cores would affect
performance, keeping the feature disabled using compile time flags.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This commit fixes a bug in 32-bit environments when a core mask greater
than 32-bits is requested. The fix is to convert the bitmask logic to
64 bits, aligning 64 and 32 bit implementations.
Fixes: adb5d548 ("examples/eventdev_pipeline_sw_pmd: add sample app")
Cc: stable@dpdk.org
Reported-by: Jun W Zhou <junx.w.zhou@intel.com>
Suggested-by: Mao Jiang <maox.jiang@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Current l2fwd application statically configures adjacent ports as
destination ports for forwarding the traffic.
Add a portmap option to pass the forwarding port pair mapping which allows
the user to configure forwarding port mapping.
If no portmap argument is specified, destination port map is not
changed and traffic gets forwarded with existing mapping.
To align port/queue configuration of each lcore with destination port
map, port/queue configuration of each lcore gets modified when portmap
option is specified.
Ex: ./l2fwd -c 0xff -- -p 0x3f -q 2 --portmap="(0,3)(1,4)(2,5)"
With above portmap option, traffic received from portid = 0 gets forwarded
to port = 3 and vice versa, similarly traffic gets forwarded on other port
pairs (1,4) and (2,5)
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The node library had a need of being linked as a whole
to make some constructors effective.
Now that all libraries are linked with --whole-archive,
there is no need to have this library separate.
Fixes: e2db26f766 ("build: always link whole DPDK static libraries")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Rather than setting -Bstatic in the linker flags when doing a static link,
and then having to explicitly set -Bdynamic again afterwards, we can update
the pkg-config file to use -l:libfoo.a syntax to explicitly refer to the
static library in question. Since this syntax is not supported by meson's
pkg-config module directly, we can post-process the .pc files instead to
adjust them.
Once done, we can simplify the examples' makefiles and the docs by removing
the explicit static flag.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
To ensure all constructors are included in static build, we need to pass
the --whole-archive flag when linking, which is used with the
"link_whole" meson option. Since we use link_whole for all libs, we no
longer need to track the lib as part of the static dependency, just the
path to the headers for compiling.
After this patch is applied, all DPDK .a files are inside
--whole-archive/--no-whole-archive flags, but external dependencies and
shared libs being linked against remain outside.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The VDPA example now uses the vDPA class iterator, so
knowing the number of available devices beforehand is
no longer needed.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
Now that wrappers to query number of queues, Virtio
features and Vhost-user protocol features are available,
let's make the vDPA example to use them.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
This patch replaces the use of vDPA device ID with
vDPA device pointer. The goals is to remove the vDPA
device ID to avoid confusion with the Vhost ID.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
This removes the notion of device ID in Vhost library
as a preliminary step to get rid of the vDPA device ID.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
This patch is a preliminary step to get rid of the
vDPA device ID. It makes vDPA callbacks to use the
vDPA device struct as a reference instead of the ID.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
This patch makes the vDPA framework to no more
support only PCI devices, but any devices by relying
on the generic device name as identifier.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
A new vDPA driver feature was added to query the virtq
statistics from the HW.
Use this feature to show the HW queues statistics for the virtqs.
Command description: stats X Y.
X is the device ID.
Y is the queue ID, Y=0xffff to show all the virtio queues
statistics of the device X.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Some places were calling the meson function host_machine.system()
instead of the variables is_windows and is_linux defined
in config/meson.build.
At the same time, the missing "Linux restriction" reason is added to
pfe and octeontx2 crypto PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When printf()'s stdout is line-buffered for terminal, it is fully
buffered for pipes. So, stdout listener can only get the output
when it is flushed (on program termination, when buffer is filled or
manual flush).
stdout buffer might fill slowly since every stats report could be small.
Also when it is fully filled it might contain a part of the last stats
report which makes it very inconvenient for any automation which reads
and parses the output.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Georgiy Levashov <georgiy.levashov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
During MTU set (kni_change_mtu) sample application setup queues, which
can free and re-allocate queues.
Meanwhile sample application keeps continues in Rx/Tx burst calls in
different threads, which may cause crash during queue setup.
Pausing application Rx/Tx calls before MTU set and starts it back
afterwards.
Bugzilla ID: 482
Fixes: a26b116749 ("examples/kni: fix MTU change to setup Tx queue")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Tested-by: Xi Zhang <xix.zhang@intel.com>
The Unix socket path may be as long as UNIX_PATH_MAX.
This constant is supposed to be defined in sys/un.h.
On Linux, it appears to be in linux/un.h.
This constant was re-defined locally, based on a variable declaration.
It is breaking compilation with -fno-common (default in GCC 10)
We could avoid the variable declaration by using NULL struct,
but it looks simpler not redefining this system constant.
As the power library and its examples are restricted to Linux only,
the Linux header file is directly included.
Fixes: 0d74597c1b ("examples/vm_power: fix max length of unix socket path")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
The variables of the same name are merged together
if compiled with -fcommon. It used to be the default.
This default behaviour allows to declare a variable in a header file and
share the variable in every .o binaries thanks to merge at link-time.
If compiling with -fno-common (default in GCC 10), the variable must be
shared as extern to avoid multiple re-definitions.
Fixes: dff22404aa ("examples/vm_power_mgr: add VCPU to PCPU mapping")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
This patch adds a fix to setup Tx queue when changing KNI interface MTU.
It ensures device can safely start txq post MTU change operation.
Fixes: fc9ee41b70 ("examples/kni: convert to new ethdev offloads API")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
In vhost_blk_bdev_construct: The string buffer may not have
a null terminator if the source string's length is equal to
the buffer size.
Fixes: 91d3e2d429 ("examples/vhost_blk: refactor to increase readability")
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Get rid of hardcoded limit of cryptodev sessions.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Few of the NIST TDES test files don't contain TDES string.
Added indicators to identify such files. These indicators
are part of only NIST TDES test vector files.
Fixes: 527cbf3d5e ("examples/fips_validation: support TDES parsing")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Ayuj Verma <ayverma@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Function create_ipsec_esp_flow returns a negative number in case of any
failure and we are passing this to strerror to display the error message.
But strerror()'s argument cannot be negative.
In case of failure, displaying exact error message to console is handled
in create_ipsec_esp_flow function.
So it is not required to print the error message again using strerror.
This patch will remove the unnecessary calling of strerror function
to fix the negative argument passing to strerror issue.
Coverity issue: 357691
Fixes: 6738c0a956 ("examples/ipsec-secgw: support flow director")
Signed-off-by: Praveen Shetty <praveen.shetty@intel.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
As more test cases are defined for execution, test scripts structure
needs to be reorganized, so fewer files are needed to describe the test.
To achieve that, new environment variables are incorporated into the
scripts.
Additionally, tests for mixed tunnel protocols are added.
Signed-off-by: Mariusz Drost <mariuszx.drost@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Currently, thread waiting on an interrupt does not have a timeout, so
it will not ever wake up until traffic arrives. This means that, when
time comes to exit the application, it will not quit unless there
happens to be traffic coming in and waking up the thread from sleep.
Fix it so that the interrupt thread sleeps for 10ms before waking up
and attempting to poll again. Additionally, remove the log message
to avoid spamming about entering interrupt mode.
Fixes: 613ce6691c ("examples/l3fwd-power: implement proper shutdown")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Lihong Ma <lihongx.ma@intel.com>
This commit fixes a segfault on exit by using Ctrl^C if the master lcore
was also being used as a worker core. The root cause of the issue was
that the interrupt handler was cleaning up resources such as the ethdev
and eventdev ports, and once the interrupt handler would return, that
thread would continue working as an eventdev worker, and dereference the
memory which just had free() called on it.
Fixed by moving the cleanup code from the interrupt handler to the
cleanup stage of main(), which the master thread will execute once
it has returned from its worker() functionality.
Fixes: 085edac2ca ("examples/eventdev_pipeline: support Tx adapter")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Jun W Zhou <junx.w.zhou@intel.com>
MBUF pool of size 8192 was causing packet loss when using four ports. To
fix this issue this patch specifies the number of MBUF's per port
instead of having one set MBUF pool size, this way it will adapt to any
number of ports.
Fixes: e64833f227 ("examples/l2fwd-keepalive: add sample application")
Cc: stable@dpdk.org
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Tested-by: Xi Zhang <xix.zhang@intel.com>
This patch moves telemetry further down the build, and adds it as a
dependency for EAL. Telemetry V2 is now configured to build by default,
and the legacy support is built when the telemetry config flag is set.
Telemetry now has EAL flags, shown below:
"--telemetry" = Enables telemetry (this is default if no flags given)
"--no-telemetry" = Disables telemetry
When telemetry is enabled, it will attempt to open the new socket
version, and also the legacy support socket (this will depend on Jansson
external dependency and telemetry config flag, as before).
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The l3fwd-power example app now registers a stats command with
telemetry, and provides a callback function to handle formatting the
power stats.
An example usage is shown below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 20.05.0-rc0", "pid": 63384, "max_output_len": 16384}
--> /
{"/": ["/", "/ethdev/link_status", "/ethdev/list", "/ethdev/xstats", \
"/help", "/info", "/l3fwd-power/stats", "/rawdev/list", \
"/rawdev/xstats"]}
--> /l3fwd-power/stats
{"/l3fwd-power/stats": {"empty_poll": 281625000, "full_poll": 0, \
"busy_percent": 0}}
The existing stats tracking done by the app using the metrics
library is unaffected. This will still be used to ensure backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Refactor the code and make it easier to read. It's
useful for understanding the inflight APIs and how
packed ring works. Update the RST because the packed
ring patch has been merged to QEMU master and ring_packed
parameter changes to packed.
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
gcc 10.0.1 reports:
../examples/ipsec-secgw/ipsec_process.c: In function ‘ipsec_process’:
../examples/ipsec-secgw/ipsec_process.c:132:34:
error: ‘grp.m’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
132 | grp[n].cnt = pkts + i - grp[n].m;
| ~~~~~~^~
This is a correct warning for the initial execution of the statement.
However, it is the design of the loop that grp[0].cnt will later be
written with the correct value using an initialized grp[0].m before it
is used.
In order to remove the warning, initialize grp[0].m for the initial and
unused calculation of grp[0].cnt.
Fixes: 3e5f4625dc ("examples/ipsec-secgw: make data-path to use IPsec library")
Cc: stable@dpdk.org
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add graph creation, configuration logic and graph main loop.
This graph main loop is run on every slave lcore and calls
rte_graph_walk() to walk over lcore specific rte_graph.
Master core accumulates and prints graph walk stats of all the
lcore's graph's.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add changes to ethdev port and queue configuration based
on command line parameters for l3fwd graph application.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add graph based l3fwd application skeleton with cmdline
parsing support inline with normal l3fwd.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Change rte_mempool_populate_iova() and rte_mempool_populate_virt() to
return 0 instead of -EINVAL when there is not enough room to store one
object, as it can be helpful for applications to distinguish this
specific case.
As this is an ABI change, use symbol versioning to preserve old
behavior for binary applications.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Currently, shutdown for l3fwd-power application is all over the place
and may or may not happen either in the signal handler or in the main()
function. Fix this so that the signal handler will only set the exit
variable, thereby allowing all of the loops to end properly and proceed
to deinitialize everything.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Currently, if power library initialization fails, only a log message is
displayed. This is suboptimal for a number of reasons, but the main one
is that telemetry mode does not depend on the power library and can
therefore run in environments where l3fwd-power would normally not run
correctly (such as inside a VM). This will lead to attempts to
deinitialize the power library on exit, with a subsequent forced unclean
shutdown of DPDK.
Fix this by only initializing the power library in modes that actually
need it, and change a log message to a failure to initialize.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
In order to avoid potential conflicts, rename the PCI_ADDR
enum value to VDPA_ADDR_PCI in vdpa_addr_type_enum.
All symbols referencing this enum are experimental, so it
does not break API policy.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Matan Azrad <matan@mellanox.com>
