The new firmware adds the hardware error types reported by MSI-x mode.
These errors are defined as RAS errors in hardware and belong to a
different type from the MSI-x errors processed by the driver.
When hardware detects an error which must be handled by the driver for
device to run properly it reports the error information through the
MSI-x interrupt. After receiving the interrupt reported by the hardware,
the driver queries the error information and identifies the error level,
then rectifies the error. All errors will be logged.
In addition, the hardware may be reset at the function or global level
based on the error level. After the reset is complete, the hardware will
recover to the normal status.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
There is a coverity defect related "Unchecked return value".
The internal static hns3_reset_err_handle function is reset error
process of hns3 PMD driver. If failure in reset process, it does not
mean that the network port is completely unavailable, so the command
interface between driver and firmware still needs to be initialized.
Regardless of whether the execution of the function named hns3_cmd_init
is successful or not, the next process after execution must be
continued, so there is no need to check the return value. If
hns3_cmd_init fails to execute, there will be corresponding log
information inside hns3_cmd_init.
This patch adds '(void)' Type conversion to avoid coverity warning.
Coverity issue: 349934
Fixes: 2790c6464725 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, Rx interrupt cannot work normally after reset (such as FLR,
global reset and IMP reset), when running l3fwd-power application based
on hns3 network engine.
The root cause is that the hardware configuration about Rx interrupt
does not recover after reset.
This patch fixes it with the following modification.
1. The internal static function named hns3(vf)_init_ring_with_vector is
moved from hns3_init_pf to hns3(vf)_init_hardware because
hns3(vf)_init_hardware is called both in the initialization and the
RESET_STAGE_DEV_INIT stage of the reset process.
2. The internal static function named hns3(vf)_restore_rx_interrupt is
added in hns3(vf)_restore_conf, it is used to recover hardware
configuration about interrupt vectors of rx queues in the
RESET_STAGE_DEV_INIT stage of the reset process.
3. The internal static function named hns3_dev_all_rx_queue_intr_enable
and hns3_enable_all_queues are added in hns3(vf)_dev_start(which
called in the initialization, so after calling the rte_eth_dev_start
API successfully, the driver is ready to work.
4. The function named hns3_dev_all_rx_queue_intr_enable and
hns3_enable_all_queues are also added in hns3(vf)_start_service(which
called in the RESET_STAGE_DEV_INIT stage of the reset process), so
after start_service, the driver is ready to work.
Note:
1. Because FLR will clear queue's interrupt enable bit hardware
configuration, so we add calling hns3_dev_all_rx_queue_intr_enable to
enable interrupt before enabling queues.
2. After finished the initialization, we can enable queues to work by
calling the internal function named hns3_enable_all_queues.
Fixes: 02a7b55657b2 ("net/hns3: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
PF FLR resets the PCIe ECAM space of all VFs under the PF
and does not automatically recover. Therefore, the VF driver
needs to restore the ECAM configuration, including
bus_master_en, msix_enable to avoid FLR reset failure.
Fixes: 2790c6464725 ("net/hns3: support device reset")
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds reset related process for hns3 PMD driver.
The following three scenarios will trigger the reset process,
and the driver settings will be restored after the reset is
successful:
1. Receive a reset interrupt
2. PF receives a hardware error interrupt
3. VF is notified by PF to reset
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds abnormal interrupt process for hns3 PMD driver,
the interrupt reported by NIC hardware.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
