This commit uses the MTU fields populated in rte_eth_dev_info_get()
to validate the MTU value being passed in port_mtu_set().
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix a typo on DEV_RX_OFFLOAD_QINQ_STRIP selection.
Fixes: 0074d02fca ("app/testpmd: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some user and tester require flow RSS to support more types,
so add "all" and "none" to make configuration more easy for users.
Tested-by: Yuan Peng <yuan.peng@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
when changing verbosity level it will configure rx/tx callbacks to dump
packets based on the verbosity value as following:
1- dump only received packets:
testpmd> set verbose 1
2- dump only sent packets:
testpmd> set verbose 2
3- dump sent and received packets:
testpmd> set verbose (any number > 2)
4- disable dump
testpmd> set verbose 0
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
add new rx/tx callback functions to be used for dumping the packets.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The helper rte_eth_dma_zone_reserve() is called by PMDs
when probing a new port.
It creates a new memzone with an unique name.
The name of this memzone was using the name of the driver
doing the probe.
In order to avoid assigning the driver before the end of the probing,
the driver name is removed from these memzone names.
The ethdev name (data->name) is not used because it may be too long
and may be not set at this stage of probing.
Syntax of old name: <driver>_<ring>_<port>_<queue>
Syntax of new name: eth_p<port>_q<queue>_<ring>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
existing testpmd command "show port info" is too verbose.
Added a new summary command to print brief information on ports.
console output:
testpmd> show port summary all
Number of available ports: 2
Port MAC Address Name Driver Status Link
0 11:22:33:44:55:66 0000:07:00.0 net_i40e up 40000Mbps
1 66:55:44:33:22:11 0000:07:00.1 net_i40e up 40000Mbps
Signed-off-by: Emma Finn <emma.finn@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Devargs may affect how device works but currently we don't have a
way to observe provided devargs.
Add ability to print device argument as part of port info,
For example, for "--vdev net_pcap0,iface=lo" output will be
"
********************* Infos for port 1 *********************
MAC address: 02:70:63:61:70:00
Device name: net_pcap0
Driver name: net_pcap
Devargs: iface=lo
....
"
or for "-w0000:86:00.1,queue-num-per-vf=8",
"
********************* Infos for port 0 *********************
MAC address: 3C:FD:FE:AB:B4:41
Device name: 0000:86:00.1
Driver name: net_i40e
Devargs: queue-num-per-vf=8
....
"
`Devargs` line may not be printed at all if devargs is not provided for
that device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Introduced DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flags and
PKT_TX_OUTER_UDP_CKSUM mbuf ol_flags to enable Tx outer UDP
checksum offload.
To use hardware Tx outer UDP checksum offload, the user needs to,
- enable following in mbuf:
a) fill outer_l2_len and outer_l3_len in mbuf
b) set the PKT_TX_OUTER_UDP_CKSUM flag
c) set the flag PKT_TX_OUTER_IPV4 or PKT_TX_OUTER_IPV6
- configure DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flags in slow path
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Introduced DEV_RX_OFFLOAD_OUTER_UDP_CKSUM Rx offload flag and
PKT_RX_OUTER_L4_CKSUM_* mbuf ol_flags to detect outer UDP checksum
status.
- To use hardware Rx outer UDP checksum offload, the user needs to
configure DEV_RX_OFFLOAD_OUTER_UDP_CKSUM offload flags in slowpath.
- Driver updates checksum status in mbuf ol_flag as
PKT_RX_OUTER_L4_CKSUM_* flags.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Command shouldn't ask RSS hash functions as argument to get supported
RSS hash function, those values will be overwritten by PMD anyway.
To display configured RSS hash functions
"show port (port_id) rss-hash"
To display configured RSS hash functions and hash key
"show port (port_id) rss-hash key"
Fixes: 8205e241b2 ("app/testpmd: add missing type to RSS hash commands")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In "show port info #" cmd output, "Supported flow types:" part is
not clear what flow types are listed.
Those are flow types that hash calculation offload supported by NIC.
Updated command output as "Supported RSS offload flow types:"
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This commit replaces all local information about pattern items and
actions as well as flow rule duplication code with calls to
rte_flow_conv().
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Currently, mempools can only be allocated either using native
DPDK memory, or anonymous memory. This patch will add two new
methods to allocate mempool using external memory (regular or
hugepage memory), and add documentation about it to testpmd
user guide.
It adds a new flag "--mp-alloc", with four possible values:
native (use regular DPDK allocator), anon (use anonymous
mempool), xmem (use externally allocated memory area), and
xmemhuge (use externally allocated hugepage memory area). Old
flag "--mp-anon" is kept for compatibility.
All external memory is allocated using the same external heap,
but each will allocate and add a new memory area.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added missing JUMP flow action in flow_action array.
Without this the flow rule cannot be created for JUMP action.
Fixes: 938a184a18 ("app/testpmd: implement basic support for flow API")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add a check for the DEV_RX_OFFLOAD_SECURITY flag to the
port_offload_cap_display().
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Current topology distribute forwarding streams to lcores by port, this
make unbalanced loading when port number larger than 2:
lcore 0: P0Q0->P1Q0, P0Q1->P1Q1
locre 1: P1Q0->P0Q0, P1Q1->P0Q1
If only one port has traffic, only one locre get fully loaded and the
other one get no forwarding. Performance is bad as only one core doing
forwarding in such case.
This patch distributes forwarding streams by queue, try to get streams
of each port handled by different lcore:
lcore 0: P0Q0->P1Q0, P1Q0->P1Q0
locre 1: P0Q1->P0Q1, P1Q1->P0Q1
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Modied the testpmd softnic forwarding mode as per the
changes in softnic PMD.
To run testpmd application with softnic fwd mode, following
command is used;
$ ./testpmd -c 0xc -n 4 --vdev 'net_softnic0,firmware=script.cli'
-- -i --forward-mode=softnic
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Application can provide 0 for ring size to use default values. To not
log zero for that case get configured ring size from device.
Call the rte_eth_rxq_info_get() and rte_eth_txq_info_get() functions
to update the number of rx and tx descriptors.
Fixes: d44f8a485f ("app/testpmd: enable per queue configure")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
While previous fix with the same title does address the main issue, root
cause is that proper handling of spec/last/mask was overlooked in the
original patch.
Mask and last fields must be taken into account at all times.
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Fixes: 67af7ecc52 ("app/testpmd: fix copy of raw flow item")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There are several cases of an invalid port data access that causes the
printing of all the valid ports, for example, when the user asks to
receive a port information of an invalid port.
Wrongly, the port with id 0 is printed in all the above described
cases, regardless of its validity.
Print port 0 only if it is valid as done for the rest of the ports.
Fixes: af75078fec ("first public release")
Fixes: b6ea6408fb ("ethdev: store numa_node per device")
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
When calculate memory size of an RTE_FLOW_ITEM_TYPE_RAW 's mask
mask->length is not the real size of binary pattern, it should take
spec->length, or memory size will be over counted (0xffff) and invalid
memory be access during following memcpy.
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Add rte_flow_action_count action data structure to enable shared
counters across multiple flows on a single port or across multiple
flows on multiple ports within the same switch domain. Also this enables
multiple count actions to be specified in a single flow action.
This patch also modifies the existing rte_flow_query API to take the
rte_flow_action structure as an input parameter instead of the
rte_flow_action_type enumeration to allow querying a specific action
from a flow rule when multiple actions of the same type are specified.
This patch also contains updates for the bonding, failsafe and mlx5 PMDs
and testpmd application which are affected by this API change.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add the port name to information printed by show port info <port_id>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Introduces a new port attribute to ethdev port's which denotes the
switch domain a port belongs to. By default all port's switch
identifiers are set to RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID. Ports
which supported the concept of switch domains can be configured with
the same switch domain id.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add support for the following OpenFlow-defined actions:
- RTE_FLOW_ACTION_OF_POP_VLAN: pop the outer VLAN tag.
- RTE_FLOW_ACTION_OF_PUSH_VLAN: push a new VLAN tag.
- RTE_FLOW_ACTION_OF_SET_VLAN_VID: set the 802.1q VLAN id.
- RTE_FLOW_ACTION_OF_SET_VLAN_PCP: set the 802.1q priority.
- RTE_FLOW_ACTION_OF_POP_MPLS: pop the outer MPLS tag.
- RTE_FLOW_ACTION_OF_PUSH_MPLS: push a new MPLS tag.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add VXLAN-GPE support to csum forwarding engine and rte flow.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
RTE_FLOW_ACTION_TYPE_PORT_ID brings the ability to inject matching traffic
into a different device, as identified by its DPDK port ID.
This is normally only supported when the target port ID has some kind of
relationship with the port ID the flow rule is created against, such as
being exposed by a common physical device (e.g. a different port of an
Ethernet switch).
The converse pattern item, RTE_FLOW_ITEM_TYPE_PORT_ID, makes the resulting
flow rule match traffic whose origin is the specified port ID. Note that
specifying a port ID that differs from the one the flow rule is created
against is normally meaningless (if even accepted), but can make sense if
combined with the transfer attribute.
These must not be confused with their PHY_PORT counterparts, which refer to
physical ports using device-specific indices, but unlike PORT_ID are not
necessarily tied to DPDK port IDs.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds the missing action counterpart to the PHY_PORT pattern
item, that is, the ability to directly inject matching traffic into a
physical port of the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
While RTE_FLOW_ITEM_TYPE_PORT refers to physical ports of the underlying
device using specific identifiers, these are often confused with DPDK port
IDs exposed to applications in the global name space.
Since this pattern item is seldom used, rename it RTE_FLOW_ITEM_PHY_PORT
for better clarity.
No ABI impact.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This new attribute enables applications to create flow rules that do not
simply match traffic whose origin is specified in the pattern (e.g. some
non-default physical port or VF), but actively affect it by applying the
flow rule at the lowest possible level in the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
By definition, RSS involves some kind of hash algorithm, usually Toeplitz.
Until now it could not be modified on a flow rule basis and PMDs had to
always assume RTE_ETH_HASH_FUNCTION_DEFAULT, which remains the default
behavior when unspecified (0).
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch replaces C99-style flexible arrays in struct rte_flow_action_rss
and struct rte_flow_item_raw with standard pointers to the same data.
They proved difficult to use in the field (e.g. no possibility of static
initialization) and unsuitable for C++ applications.
Affected PMDs and examples are updated accordingly.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Upcoming changes in relation to the handling of actions list will make the
DUP action redundant as specifying several QUEUE actions will achieve the
same behavior. Besides, no PMD implements this action.
By removing an entry from enum rte_flow_action_type, this patch breaks ABI
compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
These enable more precise reporting of objects responsible for errors.
This breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_destroy()
- rte_flow_error_set()
- rte_flow_flush()
- rte_flow_isolate()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Each queue has independent configure information in rte_port.
Base on this, we are able to add new commands to configure
different queues with different value.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Users cannot override the default RSS settings when entering a RSS action,
only a list of queues can be provided.
This patch enables them to set a RSS hash key and types for a flow rule.
Fixes: 05d34c6e9d ("app/testpmd: add queue actions to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Except for a list of queues, RSS configuration (hash key and fields) cannot
be specified from the flow command line and testpmd does not provide safe
defaults either.
In order to validate their implementation with testpmd, PMDs had to
interpret its NULL RSS configuration parameters somehow, however this has
never been valid to begin with.
This patch makes testpmd always provide default values.
The list of RSS types to use is exclusively taken from the global "rss_hf"
variable, itself configured through the "port config all rss" command or
--rss-ip/--rss-udp command-line options.
Fixes: 05d34c6e9d ("app/testpmd: add queue actions to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Which per port offloads are enabled is not clear. Printing offloads
values at forwarding start.
CRC strip offload value was printed in more verbose manner, it is
removed since Rx/Tx offload values covers it and printing only CRC one
can cause confusion.
Hexadecimal offloads values are not very user friendly but preferred to
not create to much noise during forwarding start.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
A new function was added to get a Tx port index as a function of the
topology mode and the Rx port index.
Use this function to get the Tx port index of simple stream.
Signed-off-by: Matan Azrad <matan@mellanox.com>
The testpmd user can configure port topology mode to define the port
topology between the testpmd forward ports(paired, chained and loop).
When multi-queue ports are configured by the user, the testpmd
streams are created by rss_fwd_config_setup() function, this function
doesn't take into account the chained topology mode and configures the
forward streams with paired topology mode in this case.
Configure the stream Tx port by dedicated function which calculates
a valid Tx port index as a function of the topology mode and the Rx
port index.
Fixes: af75078 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
