Modied the testpmd softnic forwarding mode as per the
changes in softnic PMD.
To run testpmd application with softnic fwd mode, following
command is used;
$ ./testpmd -c 0xc -n 4 --vdev 'net_softnic0,firmware=script.cli'
-- -i --forward-mode=softnic
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
This patch enables GSO for UDP/IPv4 packets. Oversized UDP/IPv4
packets transmitted over a GSO-enabled port will undergo segmentation.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Tested-by: Yuwei Zhang <yuwei1.zhang@intel.com>
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware
This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.
Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.
Fixes: aa1a6d87f15d ("ethdev: force RSS offload rules again")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Add following testpmd run-time commands to support test of
new Rx offload API:
show port <port_id> rx_offload capabilities
show port <port_id> rx_offload configuration
port config <port_id> rx_offload <offload> on|off
port <port_id> rxq <queue_id> rx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_strip", "ipv4_cksum", ...
Add following testpmd run-time commands to support test of
new Tx offload API:
show port <port_id> tx_offload capabilities
show port <port_id> tx_offload configuration
port config <port_id> tx_offload <offload> on|off
port <port_id> txq <queue_id> tx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_insert", "udp_cksum", ...
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Traffic manager provides an API for resuming
an arbitrary node in a hierarchy.
This commit adds support for calling this API
from testpmd.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Traffic manager provides an API for suspending
an arbitrary node in a hierarchy.
This commit adds support for calling this API from testpmd.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
After add RSS hash offload check, default rss_hf will fail on
devices that not support all bits, the patch take rss_hf as
a suggest value and only set bits that device supported base on
rte_eth_dev_get_info, also rss_hf will only be updated when new
rss offload is successfully updated on all ports by
"port config all rss [!default]" command.
Fixes: 8863a1fbfc66 ("ethdev: add supported hash function check")
Fixes: d9aa619c60b6 ("app/testpmd: new parameter for port config all RSS command")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This change adds a new option to "port config" command to
add udp tunnel port for VXLAN and GENEVE tunneling protocols.
This command can be extended for other tunneling protocols
listed in "enum rte_eth_tunnel_type" as and when needed.
usage:
port config <port_id> udp_tunnel_port add|rm vxlan|geneve <udp_port>
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add command to change specific queue's ring size configure,
the new value will only take effect after command that restart
the device(port stop <port_id>/port start <port_id>) or command
that setup the queue(port <port_id> rxq <qid> setup) at runtime.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Each queue has independent configure information in rte_port.
Base on this, we are able to add new commands to configure
different queues with different value.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new command to setup queue, rte_eth_[rx|tx]_queue_setup will
be called corresponsively.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Correct couple port id from uint8_t to uint16_t.
Fixes: f8244c6399d9 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patches add "default" parameter to "port config all rss" command.
"default" means all supported hash types reported by device info.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Except for a list of queues, RSS configuration (hash key and fields) cannot
be specified from the flow command line and testpmd does not provide safe
defaults either.
In order to validate their implementation with testpmd, PMDs had to
interpret its NULL RSS configuration parameters somehow, however this has
never been valid to begin with.
This patch makes testpmd always provide default values.
The list of RSS types to use is exclusively taken from the global "rss_hf"
variable, itself configured through the "port config all rss" command or
--rss-ip/--rss-udp command-line options.
Fixes: 05d34c6e9d2c ("app/testpmd: add queue actions to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The previous symbols were deprecated for two releases.
They are now marked as such and cannot be used anymore.
They are replaced by ones respecting the new namespace that are marked
experimental.
As a result, eth_dev attach and detach are slightly reworked to follow
the changes.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Unused variables will appear when setting RTE_LIBRTE_I40E_PMD
to be disabled.
The fix was to move these variables to the I40E_PMD scope,
since only I40E_PMD is using it.
Fixes: a9dbe1802226 ("fix ethdev port id validation")
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application assume a valid port index is in the range [0..count[.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be valid
- old ports being detached (RTE_ETH_DEV_UNUSED) can be valid
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The optimal values of several transmission & reception related
parameters, such as burst sizes, descriptor ring sizes, and number
of queues, varies between different network interface devices. This
patch allows testpmd to make use of per-PMD tuned parameter values.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The dynamic link is broken for ARM platform because the dependencies
of the DPAA PMD are not declared.
Fixes: 83c82e15e1c0 ("app/testpmd: support loopback config for DPAA")
Cc: stable@dpdk.org
Reported-by: Marco Varlese <mvarlese@suse.de>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch fixes issue during dealing with flow
director filter.
Fixes: 6c684f579df5 ("app/testpmd: add or delete flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Documentation and help string more clear describe meaning of
arguments for DDP add del function.
Fixes: 856ceb331b0a ("app/testpmd: enable DDP remove profile feature")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Introduced a run time command to change the
log level for a given log type. Added the
necessary documentation.
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
The word size of port_id is now 16 bits, but there were parsing directives
that assumed it was still of type UINT8, resulting in incorrect commandline
parse results.
Fixes: f14a210a65fe ("app: fix port id type")
Cc: stable@dpdk.org
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In current design, we can't enable SW checksum calculation
for the devices which don't have checksum offloading abilities
via the command "csum set ip|tcp|udp|sctp|outer-ip sw <port_id>".
But SW checksum calculation shouldn't depend on HW offloading
abilities. This patch is to fix this issue.
Fixes: 3926dd2b6668 ("app/testpmd: enforce offload capabilities check")
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Increase the internal limit for flow types from 32 to 64
to support future flow type extensions.
Change type of variables from uint32_t[] to uint64_t[]:
rte_eth_fdir_info.flow_types_mask
rte_eth_hash_global_conf.sym_hash_enable_mask
rte_eth_hash_global_conf.valid_bit_mask
This modification affects the following components:
net/i40e
net/ixgbe
app/testpmd
ABI versioning used to keep ABI stability.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If an invalid number of TX queues is configured from testpmd run-time
command like "port config all txq number" or from --txq in the command
to start testpmd, the global variable nb_txq is updated by this invalid
value without this patch. It may cause testpmd crash. This patch refuses
invalid txq setting and keeps its last correct value.
Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
If an invalid number of RX queues is configured from testpmd run-time
command like "port config all rxq number" or from --rxq in the command
to start testpmd, the global variable nb_rxq is updated by this invalid
value without this patch. It may cause testpmd crash. This patch refuses
invalid rxq setting and keeps its last correct value.
Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
This patch adds command to configure input set for RSS,
FDIR, and FDIR flexible payload.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add possibility to load file with raw packet and set it as a
template for FDIR setup.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This command will simulate the process of setting the
eth-peer from command line.
It will be useful to perform extra testing.
usage:
testpmd> set eth-peer <port_id> <peer_addr>.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
On ethdev there is an API to configure VLAN offloads after the port
was started and without reconfiguration of the port or queues.
In the current design of the application, when the Rx offloads are
changed (through "port config all" CLI command) the port configuration
is overwritten, therefore the configuration made for the VLAN is lost.
This patch is to address the issue by a configuration of each port Rx
offloads separately instead of using the global Rx config. Such
adjustment is required due to the conversion of the application to the
new offloads API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In the current design it was possible for offload to be set even though
the device is not supporting it. A warning message was printed instead.
This is a wrong behaviour, as application should set only the offloads
reported by the capabilities of the device.
This patch adds verification for the offloads being set and make sure
the offload configuration passed to the device always match its
capabilities.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Since testpmd is now using the new Ethdev offloads API and there is
a way configure each of the tx offloads from CLI or command line,
there is no need for the txqflags configuration anymore.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The tx_ol_flags field was used in order to control the different
Tx offloads set. After the conversion to the new Ethdev Tx offloads API
it is not needed anymore as the offloads configuration is stored in
ethdev structs.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
Convert the application to use the new API.
This patch mandates the port to be stopped when configure the Tx
offloads. This is because the PMD must be aware to the offloads changes
on the device and queue configuration.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
Convert the application to use the new API. The is no functionality
changes rather simple conversion of the flags.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add following CLIs to testpmd application;
- show port metering and policing capabilities.
- enable/disable meter of the MTR object.
- update the MTR object dscp table entries.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch updates the metering and policing CLIs as follows:
- change name of set port meter CLI to create port meter and add meter
enable option, dscp table entries arguments, action mask, policer actions
and previous meter color option as an input color
- set the right metering algorithm in add meter profile CLIs related to
srtcm(rfc2697) and trtcm(rfc2698,rfc4115)
- change clear flag type from uint32_t to string in show meter stats CLI
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
In the feature of increasing port_id range from 8 bits to 16 bits,
vlan port_id allocation function was forget to substitute UINT8 with
UINT16, so the vlan port_id was allocated as a inccrete number.
Fixes: 28caa76aea71 ("app/testpmd: fix port id type")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When using "show port xstats all" command to show xstats, the output
is usually too long to obtain what you really want, especially when
multi-queue is enabled.
Added an option to set whether zero values should be displayed
or not for xstats. The "set xstats-hide-zero on|off" command enables
the user to decide if the zero values should be shown while
displaying xstats.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
