Currently, not all shadow RAM accesses are being done under the
protection of a semaphore, which could result in corruption.
Refactor the code so that it is possible to hold the semaphore
around ixgbe_host_interface_command by introducing an unlocked form.
This patch also eliminates the function ixgbe_read_ee_hostif_data_X550
in favor of the function ixgbe_read_ee_hostif_X550.
The new arrangement is able to get both the management interface semaphore
and the EEPROM semaphore at the same time instead of separately.
Fixes: af75078fec ("first public release")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds negotiate_api_version and set_rlpml into mac_ops. With the
introduction of Hyper-V functionality, we can have separate functions to
accommodate different implementations without have one break the other.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds X550em_a FW ALEF support. ALEF is the new unified FW.
The driver uses the KRM_PMD_RX_FLEX_PORT/FLX_MASK_ST20 registers to
configure the lane mode.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch moves PHY ops pointers initialization to
ixgbe_init_phy_ops_X550em and PHY identifying/initializing
to ixgbe_identify_phy_x550em.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch changes the value of IXGBE_LINK_SPEED_10_FULL from 4 to 2,
as 4 is reserved to 100Mbit Half Duplex in E1000 shared code.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Make sure ixgbe_device_supports_autoneg_fc() returns true for the device
IDs of X550EM_A_1G_T and X550EM_A_1G_T_L.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch reduces the SWFW semaphore/PHY Token retry delay.
ixgbe_release_swfw_sync_X540: Reduce 5 ms delay after releasing
semaphore to 2 ms. HW team indicated 1 ms delay would be sufficient
for FW access.
ixgbe_acquire_swfw_sync_X540: Remove 5 ms delay after acquiring
semaphore.
ixgbe_acquire_swfw_sync_X550a: Remove 5 ms delay since there are
two 2 ms delays in the semaphore release flow.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
ixgbevf_write_msg_read_ack() is now performing mailbox write and read,
so this patch use this function to commonize mailbox write and read.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds missing FDIRSCTPM mask setting for tunneled packets.
It should be set the same way as FDIRTCPM and FDIRUDPM so that SCTP
packets can be filtered correctly.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch avoids the situation where we initialize an adapter but have not
yet set up phy.autoneg_advertised speeds. In that case we could end
up with having no autoneg speeds enabled and therefore get no link until we
reset the link and set the autoneg speeds correctly.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch removes the X550em_a specific check link function and uses
ixgbe_check_mac_link_generic instead. It is not necessary to
check both the MAC link register and external PHY registers when
checking the link.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Do parameter check to prevent exceptional value being written into
register.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
X550em_a adds GENEVE support by using the upper 16 bits of VXLANCTRL
to store the UDP port (VXLANCTRL.GENEVE_UDP_PORT).
This patch adds definitions that can be used to manipulate the ports
depending on which protocol is being configured.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Create flow control (FC) setup and enable functions to configure PHY
registers. These registers advertise FC settings according to the user
requested mode. On link establishment, these settings are negotiated
with the link partner to agree on the settings to use: RX and TX enabled,
TX only enabled, or FC disabled and RX enabled (which also enables TX).
Remove the part of code that performs FC auto-negotiation (AN) in
ixgbe_setup_m88 and put it in a new function to maintain consistency
with other FC AN implementations so far. Add function pointers to the
setup-fc and enable-fc functions so that they get called during init
to perform FC AN.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When HW starts, first read the NVM to see if the crosstalk fix should
be used on the given HW and cache that information in the HW structure.
When we check_link we first see if 1) NVM requests this fix 2) if
we are an SFP+ device 3) see if a module is not in the SFP+ cage.
If all the above are true then don't bother checking the link, just
say it is down.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Previously we checked return buffer for
(IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK), but this would not
work if index is not 0 and as a result NACK will not be detected.
Fixes: af75078fec ("first public release")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch makes sure that we access IOSF registers through the
host interface command (HIC) for the majority of X550em devices.
All devices with NVM are capable of using the HIC.
For consistency all instances where the ixgbe_write_phy_reg_mdi is called
directly are converted to function pointer calls.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch will pave the way for the new VF unicast promiscuous
mode support.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Propagate return value when trying to set the maximum packet length. A
PF driver could return a NACK for this request, and the VF driver will
need to know this.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Some function comments are obviously wrong, this patch rewords them.
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Fixes: 0790adeb56 ("ixgbe/base: support X550em_a device")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Provide a DMA coalescing configuration for 10Mb link speed.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The error exit should at least try to set the page register to 0
since other code will assume that state.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds a separate function for enabling Flow Control (FC)
auto-negotiation on X550em_a:
- rename ixgbe_fc_autoneg_x550a() to ixgbe_fc_autoneg_backplane_x550em_a().
- create ixgbe_fc_autoneg_fiber_x550em_a() specifically for fiber.
- add definitions for KRM_PCS_KX_AN_LP register and related bits.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds a separate function for setting up Flow Control (FC)
on X550em_a fiber:
- rename ixgbe_setup_fc_x550a() to ixgbe_setup_fc_backplane_x550em_a().
- create ixgbe_setup_fc_fiber_x550em_a() to configure FC for fiber.
- add definitions for KRM_AN_CNTL_4 and KRM_PCS_KX_AN along with related
definitions.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add new definitions to support VF unicast promiscuous mode which
will be implemented in a later patch.
Besides, rename definitions of subdevice IDs on SFP LOM to make it
easier to distinguish.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Fully initialize X550em_a 1G PHYs; move the PHY definitions from
ixgbe_x550.h to ixgbe_phy.h, where they really belong; define
register numbers in decimal because that is how they are in the spec.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Move the PHY probe code into a separate function so that it can be
reused. A subsequent patch will use it for configurations that
provide the PHY address explicitly.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch introduces new init_ops functions for X550EM_a and X550EM_x.
This makes it easier to assign function pointers with specific
dependencies (like media type) for each MAC.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds update_xcast_mode callback in mac ops, and moves
ixgbevf_update_xcast_mode function into base code.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch uses the shared Management Data Input/output (MDIO)
functions ixgbe_read_phy_reg_x550a and ixgbe_write_phy_reg_x550a
for X550em_a 10G PHY which supports flow control auto-negotiation.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The x550a related firmware reverses the endianness of the PHY data read
and written via host interface command, so make corresponding changes
to that.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch removes X550em SFP iXFI setup for the drivers since there
is no released hardware production with SFP iXFI.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vfta_delta value rather than the pointer should be checked.
Fixes: b978f7b38c ("net/ixgbe/base: simplify VLAN management")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In SR-IOV configuration, queues 0 - nb_rx_queues belong to VF0,
which means that with the current implementation when a reset mbox
message comes from any VF, it affects the settings of VF0.
Fix this by using PF queue index to update the correct queue.
Fixes: dbb0b8737f ("ixgbe: add vlan offload support")
Signed-off-by: Alex Zelezniak <alexz@att.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Starting rxtx before flow director config will cause driver not to
receive packets from NIC.
Signed-off-by: Wang Wei <lnykww@gmail.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For the vector PMD, release all mbufs from the Rx queue if no packets
are received after device start.
Fixes: 11b220c649 ("ixgbe: fix release queue mbufs")
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Interestingly, clang and gcc has different prototype for _mm_prefetch().
For gcc, we have
_mm_prefetch (const void *__P, enum _mm_hint __I)
While for clang, it's
#define _mm_prefetch(a, sel) (__builtin_prefetch((void *)(a), 0, (sel)))
That's how the following error comes with clang:
error: cast from 'const void *' to 'void *' drops const qualifier
[-Werror,-Wcast-qual]
_mm_prefetch((const void *)rused, _MM_HINT_T0);
/usr/lib/llvm-3.8/bin/../lib/clang/3.8.0/include/xmmintrin.h:684:58:
note: expanded from macro '_mm_prefetch'
#define _mm_prefetch(a, sel) (__builtin_prefetch((void *)(a),
0, (sel)))
What's weird is that the build was actaully Okay before. I met it while
apply Jerin's vector support for ARM patch set: he just move this piece
of code to another file, nothing else changed.
This patch fix the issue when Jerin's patchset is applied. Thus, I think
it's still needed.
Similarly, make the same change to other _mm_prefetch users, just in case
this weird issue shows up again somehow later.
Fixes: fc3d66212f ("virtio: add vector Rx")
Fixes: c95584dc2b ("ixgbe: new vectorized functions for Rx/Tx")
Fixes: 9ed94e5bb0 ("i40e: add vector Rx")
Fixes: 7092be8437 ("fm10k: add vector Rx")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Remove the 'name' member from rte_pci_driver and move to generic
rte_driver.
Most of the PMD drivers were initially using DRIVER_REGISTER_PCI(<name>..)
as well as assigning a name to eth_driver.pci_drv.name member.
In this patch, only the original DRIVER_REGISTER_PCI(<name>..) name has
been populated into the rte_driver.name member - assignments through
eth_driver has been removed.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Shreyansh: Rebase and expand changes to newly added files]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
PCI device ids moved from common header into ixgbe driver itself.
KNI starts using pci_device_id from kni/ethtool/ixgbe driver, this is
only for KNI ethtool support, KNI data path is not affected.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The ixgbe driver does not compile if CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=n
because the macro has not the proper number of parameters. To reproduce
the issue:
make config T=x86_64-native-linuxapp-gcc
sed -i 's,\(IXGBE_RX_OLFLAGS_ENABLE\)=y,\1=n,' build/.config
make -j4
[...]
ixgbe_rxtx_vec_sse.c: In function ‘_recv_raw_pkts_vec’:
ixgbe_rxtx_vec_sse.c:345:53: error:
macro "desc_to_olflags_v" passed 3 arguments, but takes just 2
desc_to_olflags_v(descs, vlan_flags, &rx_pkts[pos]);
^
ixgbe_rxtx_vec_sse.c:345:3: error:
‘desc_to_olflags_v’ undeclared (first use in this function)
desc_to_olflags_v(descs, vlan_flags, &rx_pkts[pos]);
^
ixgbe_rxtx_vec_sse.c:231:10: error:
variable ‘vlan_flags’ set but not used
uint8_t vlan_flags;
^
This patch fixes the number of arguments in the macro, and ensures that
vlan_flags is marked as used to avoid the third error.
Fixes: b37b528d95 ("mbuf: add new Rx flags for stripped VLAN")
Reported-by: Amin Tootoonchian <amint@icsi.berkeley.edu>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The ethtool app was allocating too little space for 64-bit
registers which resulted in memory corruption.
Removes hard-coded assumption that device registers
are always 32 bits wide. The rte_eth_dev_get_reg_length
and rte_eth_dev_get_reg_info callbacks did not
provide register size to the app in any way while is
needed to allocate correct number of bytes before
retrieving registers using rte_eth_dev_get_reg.
This commit changes rte_eth_dev_get_reg_info so that
it can be used to retrieve both the number of registers
and their width, and removes the now-redundant
rte_eth_dev_get_reg_length.
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Modify the PMD_REGISTER_DRIVER macro, adding a name argument to it. The
addition of a name argument creates a token that can be used for subsequent
macros in the creation of unique symbol names to export additional bits of
information for use by the pmdinfogen tool. For example:
PMD_REGISTER_DRIVER(ena_driver, ena);
registers the ena_driver struct as it always did, and creates a symbol
const char this_pmd_name0[] __attribute__((used)) = "ena";
which pmdinfogen can search for and extract. The subsequent macro
DRIVER_REGISTER_PCI_TABLE(ena, ena_pci_id_map);
creates a symbol const char ena_pci_tbl_export[] __attribute__((used)) =
"ena_pci_id_map";
Which allows pmdinfogen to find the pci table of this driver
Using this pattern, we can export arbitrary bits of information.
pmdinfo uses this information to extract hardware support from an object
file and create a json string to make hardware support info discoverable
later.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
For all drivers that currently implement xstats, the id field in the
rte_eth_stats_name structure equals the entry's array index. This
patch eliminates the redundant id field as a direct index lookup is
faster than a search for the matching id field.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
