When using SG list to TX with external and direct buffers,
HW free direct buffers and driver free external buffers.
Software scans the complete SG mbuf list to find the external
buffers to free, but this is wrong as hardware can free the
direct buffers if any present in the list and same can be
re-allocated for other purpose in multi thread or high speed
running traffic environment with new data in it. So the software
which is scanning the SG mbuf list, if that list has any direct
buffer present then that direct buffer's next pointer can give
wrong pointer value, if already freed by hardware which
can do the mempool corruption or memory leak.
In this patch instead of relying on user given SG mbuf list
we are storing the buffers in an internal list which will
be scanned by driver after transmit to free non-direct
buffers.
This patch also fixes below issues.
Driver is freeing complete SG list by checking external buffer
flag in first segment only, but external buffer can be attached
to any of the segment. Because of this, driver either can double
free buffers or there can be memory leak.
In case of indirect buffers, driver is modifying the original
buffer list to free the indirect buffers but this original buffer
list is being used by driver even after transmit packets for
non-direct buffer cleanup. This can cause the buffer leak issue.
Fixes: f191d5abda ("net/dpaa: support external buffers in Tx")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
moving the mempool ops registration before DPAA
devices probe so that device probe functions can
also be able to use mempool operations.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Creating and using driver's mempool for
allocating the SG table memory required for
FD creation.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Due to change in latest kernel, passing the interface name to
kernel through IOCTL as string instead of character pointer.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA driver has dependency on kernel to perform various functionalities.
So kernel and DPDK version should be compatible for proper working.
This patch updates the DPAA guide with the information that user can
refer to find the compatible kernel version.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
For packet length of size more than 2K bytes, segmented packets were
being received in DPDK even if mbuf size was greater than packet
length. This is due to the configuration in VSP.
This patch fixes the issue by configuring the VSP according to the
mbuf size configured during mempool configuration.
Fixes: e4abd4ff18 ("net/dpaa: support virtual storage profile")
Cc: stable@dpdk.org
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Adding one second timeout in MC send command API to ensure it doesn't
gets stuck in case of failure.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When using SG list to TX with external and direct buffers,
HW free the direct buffers and driver free the external buffers.
Software scans the complete SG mbuf list to find the external
buffers to free, but this is wrong as hardware can free the
direct buffers if any present in the list and same can be
re-allocated for other purpose in multi thread or high speed
running traffic environment with new data in it. So the software
which is scanning the SG mbuf list, if that list has any direct
buffer present then that direct buffer's next pointer can give
wrong pointer value, if already freed by hardware which
can do the mempool corruption or memory leak.
In this patch instead of relying on user given SG mbuf list
we are storing the buffers in an internal list which will
be scanned by driver after transmit to free non-direct
buffers.
This patch also fixes 2 more memory leak issues.
Driver is freeing complete SG list by checking external buffer
flag in first segment only, but external buffer can be attached
to any of the segment. Because of which driver either can double
free buffers or there can be memory leak.
In case of indirect buffers, driver is modifying the original
buffer list to free the indirect buffers but this original buffer
list is being used even after transmit packets for software
buffer cleanup. This can cause the buffer leak issue.
Fixes: 6bfbafe18d ("net/dpaa2: support external buffers in Tx")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Creating and using driver's mempool for
allocating the SG table memory required for
FD creation instead of relying on user mempool.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add support of ESP packet type in packet receive path.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Check if there exists free enqueue descriptors before enqueuing Tx
packet. Also try to free enqueue descriptors in case they are not
free.
Fixes: ed1cdbed6a ("net/dpaa2: support multiple Tx queues enqueue for ordered")
Cc: stable@dpdk.org
Signed-off-by: Brick Yang <brick.yang@nxp.com>
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Driver is giving the wrong interface ID while setting the
error behaviour.
This patch fixes the issue by passing the correct MAC interface
index value to the API.
Fixes: 3d43972b1b ("net/dpaa2: do not drop parse error packets by dpdmux")
Cc: stable@dpdk.org
Signed-off-by: Vanshika Shukla <vanshika.shukla@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Driver has no proper handling to free unused
allocated mbufs in case of error or when the rx
processing complete because of which mempool
can be empty after some time.
This patch fixes this issue by moving the buffer
allocation code to the right place in driver.
Fixes: ecae71571b ("net/enetfec: support Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Queue reset is missing in restart because of which
IO cannot work on device restart.
This patch fixes the issue by resetting the queues on
device restart.
Fixes: b84fdd3963 ("net/enetfec: support UIO")
Cc: stable@dpdk.org
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch sets qman portal file descriptors used for
interrupts IO processing in non-blocking mode to avoid
any unwanted blocks while IO operations over the FD.
Signed-off-by: Vanshika Shukla <vanshika.shukla@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
NIC HW controllers often come with congestion management support on
various HW objects such as Rx queue depth or mempool queue depth.
Also, it can support various modes of operation such as RED
(Random early discard), WRED etc on those HW objects.
Add a framework to express such modes(enum rte_cman_mode) and
introduce (enum rte_eth_cman_obj) to enumerate the different
objects where the modes can operate on.
Add RTE_CMAN_RED mode of operation and RTE_ETH_CMAN_OBJ_RX_QUEUE,
RTE_ETH_CMAN_OBJ_RX_QUEUE_MEMPOOL objects.
Introduce reserved fields in configuration structure
backed by rte_eth_cman_config_init() to add new configuration
parameters without ABI breakage.
Add rte_eth_cman_info_get() API to get the information such as
supported modes and objects.
Add rte_eth_cman_config_init(), rte_eth_cman_config_set() APIs
to configure congestion management on those object with associated mode.
Finally, add rte_eth_cman_config_get() API to retrieve the
applied configuration.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Sunil Kumar Kori <skori@marvell.com>
This patch support query HW descriptor from hns3 device. HW descriptor
is also called BD (buffer description) which is shared memory between
software and hardware.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Added the ethdev Rx/Tx desc dump API which provides functions for query
descriptor from device. HW descriptor info differs in different NICs.
The information demonstrates I/O process which is important for debug.
As the information is different between NICs, the new API is introduced.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
mana can receive Rx interrupts from kernel through RDMA verbs interface.
Implement Rx interrupts in the driver.
Signed-off-by: Long Li <longli@microsoft.com>
MANA allocates device queues through the IB layer when starting Rx queues.
When device is stopped all the queues are unmapped and freed.
Signed-off-by: Long Li <longli@microsoft.com>
MANA allocate device queues through the IB layer when starting Tx queues.
When device is stopped all the queues are unmapped and freed.
Signed-off-by: Long Li <longli@microsoft.com>
The hardware layer of MANA understands the device queue and doorbell
formats. Those functions are implemented for use by packet RX/TX code.
Signed-off-by: Long Li <longli@microsoft.com>
MANA hardware has iommu built-in, that provides hardware safe access to
user memory through memory registration. Since memory registration is an
expensive operation, this patch implements a two level memory registration
cache mechanisum for each queue and for each port.
Signed-off-by: Long Li <longli@microsoft.com>
Rx hardware queue is allocated when starting the queue. This function is
for queue configuration pre starting.
Signed-off-by: Long Li <longli@microsoft.com>
Currently this PMD supports RSS configuration when the device is stopped.
Configuring RSS in running state will be supported in the future.
Signed-off-by: Long Li <longli@microsoft.com>
MANA supports PCI hot plug events. Add this interrupt to DPDK core so its
parent PMD can detect device removal during Azure servicing or live
migration.
Signed-off-by: Long Li <longli@microsoft.com>
MANA defines its memory allocation functions to override IB layer default
functions to allocate device queues. This patch adds the code for device
configuration and stop.
Signed-off-by: Long Li <longli@microsoft.com>
MANA is a PCI device. It uses IB verbs to access hardware through the
kernel RDMA layer. This patch introduces build environment and basic
device probe functions.
Signed-off-by: Long Li <longli@microsoft.com>
nfp_net_recv_pkts() should not return a value that less than 0 and the
inappropriate return value in receive loop also causes the memory leak.
Modify code to avoid return a value less than 0. Furthermore, When
nfp_net_recv_pkts() break out from the receive loop because of packet
problems, a rte_mbuf will not be freed and it will cause memory leak.
Free the rte_mbuf before break out.
Fixes: b812daadad ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Long Wu <long.wu@corigine.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
For the Rx logic, the representor port decap packet from the
corresponding ring.
For the Tx logic, the representor port prepend the metadata
into packet, and send to firmware through the queue 0 of pf
vNIC.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
For the Rx logic, fallback packets are multiplexed to the
correct representor port based on the prepended metadata.
For the Tx logic, because fallback packets are prepended
metadata, the start of the packet has to be adjusted for
in the Tx descriptor.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
The flower firmware application makes use of the same Rx
and Tx checksum logic as the normal PMD. Expose it so that
flower firmware application also can make use of it.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Adds the start/stop/close routine of the flower PF vNIC.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Adds the framework to support flower representors. The number of VF
representors are parsed from the command line. For physical port
representors the current logic aims to create a representor for
each physical port present on the hardware.
An eth_dev is created for each physical port and VF, and flower
firmware requires a MAC repr cmsg to be transmitted to firmware
with info about the number of physical ports configured.
Reify messages are sent to hardware for each physical port representor.
An rte_ring is also created per representor so that traffic can be
pushed and pulled to this interface.
To up and down the real device represented by a flower representor port
a port mod message is used to convey that info to the firmware. This
message will be used in the dev_ops callbacks of flower representors.
Each cmsg generated by the driver is prepended with a cmsg header.
This commit also adds the logic to fill in the header of cmsgs.
Also add the Rx and Tx path for flower representors. For Rx packets are
dequeued from the representor ring and passed to the eth_dev. For Tx
the first queue of the PF vNIC is used. Metadata about the representor
is added before the packet is sent down to firmware.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Adds the Rx and Tx function for the ctrl VNIC. The logic is mostly
identical to the normal Rx and Tx functionality of the NFP PMD.
Make use of the ctrl VNIC service logic to service the ctrl vNIC Rx
path.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Move some common Rx and Tx logic to the header file so that
they can be re-used by flower Tx and Rx logic.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Adds the setup/start logic for the ctrl vNIC. This vNIC is used by
the PMD and flower firmware application as a communication channel
between driver and firmware. In the case of OVS it is also used to
communicate flow statistics from hardware to the driver.
A rte_eth device is not exposed to DPDK for this vNIC as it is strictly
used internally by flower logic.
Because of the add of ctrl vNIC, a new PCItoCPPBar is needed. Modify the
related logics.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Adds the vNIC initialization logic for the flower PF vNIC. The flower
firmware application exposes this vNIC for the purposes of fallback
traffic in the switchdev use-case.
Adds minimal dev_ops for this PF vNIC device. Because the device is
being exposed externally to DPDK it needs to implements a minimal set
of dev_ops.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Adds the basic probing infrastructure to support the flower firmware
application.
Adds the cpp service, used for some user tools.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
The NFP card can load different firmware applications.
This commit move the init logic of corenic app of the
secondary process into its own function.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Calling nfp_net_init() is only done for the corenic firmware flavor
and it is guaranteed to always be called from the primary process,
so the explicit check for RTE_PROC_PRIMARY can be dropped.
The calling graph of nfp_net_init() already guaranteed the free of
resources when it fail, so remove the necessary free logics inside it.
While at it remove the unused member is_phyport from struct nfp_net_hw.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
The NFP card can load different application firmwares. Currently
only the CoreNIC application firmware is supported. This commit makes
needed infrastructure changes in order to support other application
firmwares too.
Clearer separation is made between the PF device and any application
firmware specific concepts. The PF struct is now generic regardless
of the application firmware loaded. A new struct is also made for the
CoreNIC application firmware. Future additions to support other
application firmwares should also add an application firmware specific
struct.
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
