For use in "transfer" flows. Supposed to send matching traffic to the
entity represented by the given ethdev, at embedded switch level.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to send matching traffic to
the given ethdev (to the application), at embedded switch level.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic entering the
embedded switch from the entity represented by the given ethdev.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic
entering the embedded switch from the given ethdev.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Move rte_eth_dev, rte_eth_dev_data, rte_eth_rxtx_callback and related
data into private header (ethdev_driver.h).
Few minor changes to keep DPDK building after that.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Introduce rte_eth_macaddrs_get() to allow user to retrieve all ethernet
addresses assigned to given port.
Change testpmd to use this new function and avoid referencing directly
rte_eth_devices[].
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Rework fast-path ethdev functions to use rte_eth_fp_ops[].
While it is an API/ABI breakage, this change is intended to be
transparent for both users (no changes in user app is required) and
PMD developers (no changes in PMD is required).
One extra thing to note - RX/TX callback invocation will cause extra
function call with these changes. That might cause some insignificant
slowdown for code-path where RX/TX callbacks are heavily involved.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Copy public function pointers (rx_pkt_burst(), etc.) and related
pointers to internal data from rte_eth_dev structure into a
separate flat array. That array will remain in a public header.
The intention here is to make rte_eth_dev and related structures internal.
That should allow future possible changes to core eth_dev structures
to be transparent to the user and help to avoid ABI/API breakages.
The plan is to keep minimal part of data from rte_eth_dev public,
so we still can use inline functions for fast-path calls
(like rte_eth_rx_burst(), etc.) to avoid/minimize slowdown.
The whole idea beyond this new schema:
1. PMDs keep to setup fast-path function pointers and related data
inside rte_eth_dev struct in the same way they did it before.
2. Inside rte_eth_dev_start() and inside rte_eth_dev_probing_finish()
(for secondary process) we call eth_dev_fp_ops_setup, which
copies these function and data pointers into rte_eth_fp_ops[port_id].
3. Inside rte_eth_dev_stop() and inside rte_eth_dev_release_port()
we call eth_dev_fp_ops_reset(), which resets rte_eth_fp_ops[port_id]
into some dummy values.
4. fast-path ethdev API (rte_eth_rx_burst(), etc.) will use that new
flat array to call PMD specific functions.
That approach should allow us to make rte_eth_devices[] private
without introducing regression and help to avoid changes in drivers code.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Currently majority of fast-path ethdev ops take pointers to internal
queue data structures as an input parameter.
While eth_rx_queue_count() takes a pointer to rte_eth_dev and queue
index.
For future work to hide rte_eth_devices[] and friends it would be
plausible to unify parameters list of all fast-path ethdev ops.
This patch changes eth_rx_queue_count() to accept pointer to internal
queue data as input parameter.
While this change is transparent to user, it still counts as an ABI change,
as eth_rx_queue_count_t is used by ethdev public inline function
rte_eth_rx_queue_count().
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
At queue configure stage always allocate space for maximum possible
number (RTE_MAX_QUEUES_PER_PORT) of queue pointers.
That will allow 'fast' inline functions (eth_rx_burst, etc.) to refer
pointer to internal queue data without extra checking of current number
of configured queues.
That would help in future to hide rte_eth_dev and related structures.
It means that from now on, each ethdev port will always consume:
((2*sizeof(uintptr_t))* RTE_MAX_QUEUES_PER_PORT)
bytes of memory for its queue pointers.
With RTE_MAX_QUEUES_PER_PORT==1024 (default value) it is 16KB per port.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Provide an API to let the application control the NIC's ability
to deliver specific kinds of per-packet metadata to the PMD.
Checks for the NIC's ability to set these kinds of metadata
in the first place (support for the flow actions) belong in
flow API responsibility domain (flow validate mechanism).
This topic is out of scope of the new API in question.
The PMD's ability to deliver received metadata to the user
by virtue of mbuf fields should be covered by mbuf library.
It is also out of scope of the new API in question.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Indirect actions should be used to do shared counters.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The patch is required for all PMDs which do not provide representors
info on the representor itself.
The function, rte_eth_representor_id_get(), is used in
eth_representor_cmp() which is required in ethdev class iterator to
search ethdev port ID by name (representor case). Before the patch
the function is called on the representor itself and tries to get
representors info to match.
Search of port ID by name is used after hotplug to find out port ID
of the just plugged device.
Getting a list of representors from a representor does not make sense.
Instead, a backer device should be used.
To this end, extend the rte_eth_dev_data structure to include the port ID
of the backing device for representors.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
rte_eth_rx_descriptor_status() should be used as a replacement.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In struct rte_security_ipsec_sa_options, for every new option
added, there is an ABI breakage, to avoid, a reserved_opts
bitfield is added to for the remaining bits available in the
structure.
Now for every new sa option, these reserved_opts can be reduced
and new option can be added.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
rte_security_dynfield_register() is an internal
API to be used by the driver, hence moving it to internal.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Added device information to capture explicitly the assumption
of the input/output data byte endianness being processed.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
If no next segment available the “for” loop will fail and it still
returns i+1 i.e. 2, which is wrong as it has filled only 1 buffer.
Fixes: 7adf992fb9 ("cryptodev: introduce CPU crypto API")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The structure rte_crypto_sym_vec is updated to
add dest_sgl to support out of place processing.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The current crypto raw data vectors is extended to support
rte_security usecases, where we need total data length to know
how much additional memory space is available in buffer other
than data length so that driver/HW can write expanded size
data after encryption.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch renames the sgl to src_sgl in struct rte_crypto_sym_vec
to help differentiating between source and destination sgl.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add telemetry support for ipsec SAs.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add ESP tunnel type to the tunnel types list that can be specified
for TSO or checksum on the inner part of tunnel packets.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add support for the IPsec NAT-Traversal use case for Tunnel mode
packets.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for specifying UDP port params for UDP encapsulation option.
RFC3948 section-2.1 does not enforce using specific the UDP ports for
UDP-Encapsulated ESP Header
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added support for AES_CCM, CHACHA20_POLY1305 and AES_GMAC.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Update ipsec_xform definition to include ESN field.
This allows the application to control the ESN starting value.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
As described in [1] and as announced in [2], The field ``dataunit_len``
of the ``struct rte_crypto_cipher_xform`` moved to the end of the
structure and extended to ``uint32_t``.
In this way, sizes bigger than 64K bytes can be supported for data-unit
lengths.
[1] commit d014dddb2d ("cryptodev: support multiple cipher
data-units")
[2] commit 9a5c09211b ("doc: announce extension of crypto data-unit
length")
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
As reported by Dmitry, RTE_MEMPOOL_F_POOL_CREATED is a flag only
manipulated internally.
This flag is not supposed to be requested from an application and would
probably result in an incorrect behavior if an application did pass it.
At least one other internal flag has been added recently and more may be
introduced later.
Rework the check and export a mask of valid user flags for use in the
unit test.
Fixes: b240af8b10 ("mempool: enforce valid flags at creation")
Reported-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
MEMPOOL_PG_NUM_DEFAULT and MEMPOOL_PG_SHIFT_MAX are not used.
Fixes: fd943c764a ("mempool: deprecate xmem functions")
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add RTE_ prefix to macro used to register mempool driver.
The old one is still available but deprecated.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add RTE_ prefix to helper macro to calculate mempool header size and
make it internal. Old macro is still available, but deprecated.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add RTE_ prefix to internal API defined in public header.
Use the prefix instead of double underscore.
Use uppercase for macros in the case of name conflict.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Fix the mempool flags namespace by adding an RTE_ prefix to the name.
The old flags remain usable, to be deprecated in the future.
Flag MEMPOOL_F_NON_IO added in the release is just renamed to have RTE_
prefix.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Move documentation into a separate line just before define.
Prepare to have a bit longer flag name because of namespace prefix.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Instead of polling for previous lock holder unlocking, use
wait_until_equal API.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Instead of polling for mcfg->magic to be updated, use wait_until_equal
API.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
In stack module, remove the header file rte_atomic.h
as it is not being used.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Mempool is a generic allocator that is not necessarily used
for device IO operations and its memory for DMA.
Add MEMPOOL_F_NON_IO flag to mark such mempools automatically
a) if their objects are not contiguous;
b) if IOVA is not available for any object.
Other components can inspect this flag
in order to optimize their memory management.
Discussion: https://mails.dpdk.org/archives/dev/2021-August/216654.html
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Data path performance can benefit if the PMD knows which memory it will
need to handle in advance, before the first mbuf is sent to the PMD.
It is impractical, however, to consider all allocated memory for this
purpose. Most often mbuf memory comes from mempools that can come and
go. PMD can enumerate existing mempools on device start, but it also
needs to track creation and destruction of mempools after the forwarding
starts but before an mbuf from the new mempool is sent to the device.
Add an API to register callback for mempool life cycle events:
* rte_mempool_event_callback_register()
* rte_mempool_event_callback_unregister()
Currently tracked events are:
* RTE_MEMPOOL_EVENT_READY (after populating a mempool)
* RTE_MEMPOOL_EVENT_DESTROY (before freeing a mempool)
Provide a unit test for the new API.
The new API is internal, because it is primarily demanded by PMDs that
may need to deal with any mempools and do not control their creation,
while an application, on the other hand, knows which mempools it creates
and doesn't care about internal mempools PMDs might create.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Due to HW or driver limitations, not all dmadevs may support full error
handling e.g. safely managing and reporting an invalid address to a copy
operation. The skeleton dmadev, for example, being pure software will
always seg-fault if passed an invalid address. To indicate the
availability of safe error handling by a device, we add a capability
flag for it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Add a function and wrapper macro to iterate over all DMA devices.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Add a burst capacity check API to the dmadev library. This API is useful to
applications which need to how many descriptors can be enqueued in the
current batch. For example, it could be used to determine whether all
segments of a multi-segment packet can be enqueued in the same batch or not
(to avoid half-offload of the packet).
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Add in a function to check if a device or vchan has completed all jobs
assigned to it, without gathering in the results. This is primarily for
use in testing, to allow the hardware to be in a known-state prior to
gathering completions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
This patch add data plane API for dmadev.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
This patch add control plane API for dmadev.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
The 'dmadev' is a generic type of DMA device.
This patch introduce the 'dmadev' device allocation functions.
The infrastructure is prepared to welcome drivers in drivers/dma/
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
As stated in the API, dynamic field and flags should be created with no
additional flag (simply in the API for future changes).
Fix the dynamic flag register helper which was not enforcing it and add
unit tests.
Fixes: 4958ca3a44 ("mbuf: support dynamic fields and flags")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
