Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix portability
issues across different architectures.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Only the drivers itself can decide if it could fill PCI information fields
of dev_info.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
declare the list of kernel modules required to run properly.
Today, most PCI drivers require uio/vfio.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
83xx NIC subsystem differs in new PCI subsystem_device_id and
NICVF_CAP_DISABLE_APAD capability.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Based on the packet type(IPv4 or IPv6), the nicvf HW aligns
L3 data to the 64bit memory address.
The alignment creates a hole in mbuf(between the
end of headroom and packet data start).
The new revision of the HW provides an option to disable
the L3 alignment feature and make mbuf layout looks
more like other NICs. For better application compatibility,
disabling l3 alignment feature on the hardware revisions it supports.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
add cb_arg parameter to the _rte_eth_dev_callback_process function.
Adding a parameter to this function allows passing information
to the application when an eth device event occurs such as
a VF to PF message.
This allows the application to decide if a particular function
is permitted.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Alex Zelezniak <alexz@att.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Summary:
- add secondary qset support in device stats
- add support for releasing mbufs from RBDR for >8 queues
- add support for releasing mbufs from RX queues for >8 queues
- support >8 queues in tx_queue_setup
- support >8 queues in rx_queue_setup
- support up to 96 queues per device (dev_info->max_rx_queues)
- add secondary qset support in rbdr_rte_mempool_get
- support >8 queues in multiprocess mode (do not reconfigure VFs)
- setup periodic alarm accordingly for type of VFs:
* primary VF - handle events on queues and link status
* secondary VF - handle events on queues
- initialize hardware capabilities in secondary qsets
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
In case of the multiprocess mode a shared nicvf struct between processes
cannot point with the eth_dev pointer to master device, therefore remove it
along with references to it refactoring the code where needed.
This change fixes multiprocess issues detected in stats.
Fixes: 7413feee66 ("net/thunderx: add device start/stop and close")
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Changes:
- add new message sqs_alloc in mailbox
- add a queue container to hold secondary qsets.
- add nicvf_mbox_request_sqs
- handle new mailbox messages for secondary queue set support
- register secondary queue sets for further reuse
- register the number secondary queue sets in MSG_QS_CFG
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This interface (nicvf_bsvf) will be used for secondary queue set support.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The symbols PKT_TX_TCP_CKSUM and PKT_TX_UDP_CKSUM are not bits on a
bitmask. Set l3_offset always for TX offloads, not just for PKT_TX_IP_CKSUM
being true.
Fixes: 1c421f18e0 ("net/thunderx: add single and multi-segment Tx")
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
81xx NIC subsystem differs in new PCI subsystem_device_id and
NICVF_CAP_CQE_RX2 capability.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Certain thunderx SoC pass has additional optional word
in Rx descriptor to hold tunneling extension info.
Based on this capability, the location where packet pointer
address stored in Rx descriptor will vary.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
thunderx pmd driver needs to support multiple SoC
variants in ThunderX family.
Remove generic pass references from driver as each SoC
can have same pass number.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Remove the 'name' member from rte_pci_driver and move to generic
rte_driver.
Most of the PMD drivers were initially using DRIVER_REGISTER_PCI(<name>..)
as well as assigning a name to eth_driver.pci_drv.name member.
In this patch, only the original DRIVER_REGISTER_PCI(<name>..) name has
been populated into the rte_driver.name member - assignments through
eth_driver has been removed.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Shreyansh: Rebase and expand changes to newly added files]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Allocate maximum supported hardware ring hardware descriptors
memory on the first rte_eth_dma_zone_reserve call in order to
get sufficient hardware ring buffer space on subsequent queue
setup request with different queue size.
Fixes: aa0d976e50 ("net/thunderx: add Rx queue setup and release")
Fixes: 3f3c6f9724 ("net/thunderx: add Tx queue setup and release")
Fixes: 7413feee66 ("net/thunderx: add device start/stop and close")
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The ethtool app was allocating too little space for 64-bit
registers which resulted in memory corruption.
Removes hard-coded assumption that device registers
are always 32 bits wide. The rte_eth_dev_get_reg_length
and rte_eth_dev_get_reg_info callbacks did not
provide register size to the app in any way while is
needed to allocate correct number of bytes before
retrieving registers using rte_eth_dev_get_reg.
This commit changes rte_eth_dev_get_reg_info so that
it can be used to retrieve both the number of registers
and their width, and removes the now-redundant
rte_eth_dev_get_reg_length.
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Since now the PMD_REGISTER_DRIVER macro sets the driver names,
there is no need to have the rte_driver structure setting it
statically, as it will get overridden.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Modify the PMD_REGISTER_DRIVER macro, adding a name argument to it. The
addition of a name argument creates a token that can be used for subsequent
macros in the creation of unique symbol names to export additional bits of
information for use by the pmdinfogen tool. For example:
PMD_REGISTER_DRIVER(ena_driver, ena);
registers the ena_driver struct as it always did, and creates a symbol
const char this_pmd_name0[] __attribute__((used)) = "ena";
which pmdinfogen can search for and extract. The subsequent macro
DRIVER_REGISTER_PCI_TABLE(ena, ena_pci_id_map);
creates a symbol const char ena_pci_tbl_export[] __attribute__((used)) =
"ena_pci_id_map";
Which allows pmdinfogen to find the pci table of this driver
Using this pattern, we can export arbitrary bits of information.
pmdinfo uses this information to extract hardware support from an object
file and create a json string to make hardware support info discoverable
later.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The mempool_count and mempool_free_count behaved contrary to what their
names suggested. The free_count function actually returned the number of
elements that were allocated from the pool, not the number unallocated as
the name implied.
Fix this by introducing two new functions to replace the old ones,
* rte_mempool_avail_count to replace rte_mempool_count
* rte_mempool_in_use_count to replace rte_mempool_free_count
In this patch, the new functions are added, and the old ones are marked
as deprecated. All apps and examples that use the old functions are
updated to use the new functions.
Fixes: af75078fec ("first public release")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
To prevent compile error when compiling for shared library:
nicvf_hw.o: In function `nicvf_qsize_regbit':
nicvf_hw.c:(.text+0xe64): undefined reference to `log2'
nicvf_hw.o: In function `nicvf_rss_reta_update':
nicvf_hw.c:(.text+0x19dd): undefined reference to `log2'
nicvf_hw.o: In function `nicvf_rss_reta_query':
nicvf_hw.c:(.text+0x1acb): undefined reference to `log2'
Fixes: e438796617 ("net/thunderx: add PMD skeleton")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Fix the following error with clang
error: unused function 'nicvf_mbox_msg_str'
The function nicvf_mbox_msg_str() may be unused, based on DEBUG
compilation option selected. Mark __attribute__((unused)) on
this function, to inform compiler that this function may be unused
Fixes: 966e225c23 ("net/thunderx/base: add mailbox for PF/VF communication")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
'fno-prefetch-loop-arrays' optimization flag is not supported with clang,
so use it only when compiling with gcc.
Fixes: 1c421f18e0 ("net/thunderx: add single and multi-segment Tx")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
