Default masks were introduced in the API after its implementation in this
PMD.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Querying the link status can end up being in an inconsistent state,
like the port is reporting speed although it is down.
For this case another query is scheduled.
A race condition can occur between the scheduled query and link
status interrupt handlers.
When the scheduled query by-pass interrupt handlers, the link status
will be stuck in an inconsistent state.
This patch addresses the race condition by not blocking link status
queries in case delayed query is used.
Fixes: 198a3c339a ("mlx5: handle link status interrupts")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Size of the mask is wrongly computed and make the validation process only
verify the first 4 bytes of the layer.
Fixes: 2097d0d1e2 ("net/mlx5: support basic flow items and actions")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
TCI field is read from the wrong place due to an invalid cast. Moreover
there is no need to limit matching to VID since PCP and DEI bits can be
matched as well.
Fixes: 12475fb203 ("net/mlx5: support VLAN flow item")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
in case of an error argument list is not freed.
Fixes: e72dd09b61 ("net/mlx5: add support for configuration through kvargs")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
When the WQ is wrapped around, it wrongly checks the condition when
resetting the pointer. It should be compared against the end of the queue,
not the beginning of the queue. And this isn't even needed when the length
of the copying data crosses the boundary.
Fixes: fdcb0f5305 ("net/mlx5: use work queue buffer as a raw buffer")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The size of Rx RSS indirection table was limited by 256, but it is not
required anymore for all Mellanox NICs. However, the librte_ether still
limits the size by 512.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
On receiving a compressed session of Rx completion, prefetch every entries
to be invalidated. Also, invalidate consumed completions per every 8
mini-completions, not to wait until the last entry is consumed. This helps
to reduce jitter in rx_burst.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Mellanox PMDs do not differentiate IP header with or without options, so
the advertised packet type for an IPv4 should not be RTE_PTYPE_L3_IPV4,
which explicitly means "does not contain any header option".
Change the driver to set
RTE_PTYPE(_INNER)_L3_IPV4_EXT_UNKNOWN or
RTE_PTYPE(_INNER)_L3_IPV6_EXT_UNKNOWN flags for all IPv4/IPv6 packets
received.
Fixes: 429df3803a ("mlx4: replace some offload flags with packet type")
Fixes: 67fa62bc67 ("mlx5: support checksum offload")
Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Signed-off-by: Matthieu Ternisien d'Ouville <matthieu.tdo@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Retrieving link status information through the link update callback should
be quick and non-blocking.
Mellanox PMDs retrieve this information through ioctl() calls on the
related kernel netdevice. This appears to take a long time to
complete and may cause significant slowdowns in applications.
While these system calls cannot be accelerated, removing the lock on the
private structure allows applications to perform other control operations
from separate threads in the meantime. This function remains safe without
locking as it does not write the private structure, it is only used to
retrieve the name of the netdevice.
Signed-off-by: Matthieu Ternisien d'Ouville <matthieu.tdo@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add PCI device ID for ConnectX-5 and enable multi-packet send for PF and VF
along with changing documentation and release note.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Dseg pointer is not initialized when the first segment is inlined
causing a segmentation fault in such situation.
Fixes: 2a66cf3789 ("net/mlx5: support inline send")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Too much data is uselessly written to the Tx doorbell, which since v16.11
may also cause Tx queues to behave erratically and crash applications.
This regression was seen on VF devices when the BlueFlame buffer size is
zero (txq->bf_buf_size) due to the following change:
- txq->bf_offset ^= txq->bf_buf_size;
+ txq->bf_offset ^= (1 << txq->bf_buf_size);
Fixes: 1d88ba1719 ("net/mlx5: refactor Tx data path")
Fixes: d5793daefe ("net/mlx5: reduce memory overhead for BF handling")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Prefetching completion queue entries is inefficient because too few CPU
cycles are spent before their use, which results into cache misses anyway.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Use fewer instructions to copy the first two bytes of Ethernet headers to
work queue elements.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Gather function prototypes at the beginning of the file.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Let compiler automatically use the vector capabilities of the target
machine to optimize instructions.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Define a single work queue element type that encompasses them all. It
includes control, Ethernet segment and raw data all grouped in a single
place.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Prepare the code to write the Work Queue Element with vectorized
instructions.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Elad Persiko <eladpe@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commits adds:
- Type of service
- Next protocol ID
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Introduce initial software for rte_flow rules.
VLAN, VXLAN are still not supported.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Flows redirected to a specific queue do not have a valid RSS hash result
and the related mbuf flag must not be set.
Fixes: ecf60761fc ("net/mlx5: return RSS hash result in mbuf")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
We can leave the title completion queue entry untouched since its contents
are not modified.
Reported-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Completion queue entry data uses network endian, to access them we should
use ntoh*().
Fixes: c305090bba ("net/mlx5: replace countdown with threshold for Tx completions")
Reported-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The list of segments to free was wrongly manipulated ending by only freeing
the first segment instead of freeing all of them. The last one still
belongs to the NIC and thus should not be freed.
Fixes: a1bdb71a32 ("net/mlx5: fix crash in Rx")
Reported-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There is already a directory buildtools for pmdinfogen used by
the build system. The scripts used in makefiles are moved here.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Only the drivers itself can decide if it could fill PCI information fields
of dev_info.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This moves the non-PCI related initialization of the link state interrupt
callback list and the setting of the default MTU to rte_eth_dev_allocate()
so that drivers only need to set non-default values.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Lets clear the eth_dev->data when allocating a new rte_eth_dev so that
drivers only need to set non-zero values.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
declare the list of kernel modules required to run properly.
Today, most PCI drivers require uio/vfio.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit redefines the completion queue element structure as the
original lacks the required fields.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When mbufs are smaller than MRU, multi-segment support must be enabled to
default set when not in promiscuous or allmulticast modes.
Fixes: 9964b965ad ("net/mlx5: re-add Rx scatter support")
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Constraint alignment was not respected in Tx because of a
wrong use of vector instruction.
Fixes: 1d88ba1719 ("net/mlx5: refactor Tx data path")
Signed-off-by: Elad Persiko <eladpe@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Not all speed capabilities can be reported properly before Linux 4.8 (25G,
50G and 100G speeds are missing), moreover the API to retrieve them only
exists since Linux 4.5, this commit thus implements compatibility code for
all versions.
Fixes: e274f57322 ("ethdev: add speed capabilities")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The changes introduced by previous commits (ones in fixes lines) made
secondaries attempt to reinitialize the Tx queue structures of the primary
instead of their own, for which they also do not allocate enough memory,
leading to crashes.
Fixes: 1d88ba1719 ("net/mlx5: refactor Tx data path")
Fixes: 21c8bb4928 ("net/mlx5: split Tx queue structure")
Signed-off-by: Olivier Gournet <ogournet@corp.free.fr>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit fixes link status report on device start up when
lcs callback is configured.
Fixes: 62072098b5 ("mlx5: support setting link up or down")
Signed-off-by: Olga Shern <olgas@mellanox.com>
add cb_arg parameter to the _rte_eth_dev_callback_process function.
Adding a parameter to this function allows passing information
to the application when an eth device event occurs such as
a VF to PF message.
This allows the application to decide if a particular function
is permitted.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Alex Zelezniak <alexz@att.com>
