These struct members and variable were commented out. Remove them.
Fixes: c01c748e4a ("net/ipn3ke: add new driver")
Fixes: c820468ac9 ("net/ipn3ke: support TM")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Set up MTU to the minimum among Tx MTU, Rx MTU and
IPN3KE_MAC_FRAME_SIZE_MAX.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
ipn3ke can work on 10G mode and 25G mode.
10G mode and 25G mode has different MAC register address for statistics.
This patch implements statistics registers for 10G mode and 25G mode.
Also implements different stats clearing per mode.
Fixes: c01c748e4a ("net/ipn3ke: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Modify AFU configurations for new BBS (Blue Bitstream) of A10 on N3000
card:
- AFU register access: RTL changes the UPL (User Programmable Logic
which is the container of vBNG IP) base address and the read/write
commands of register indirect access.
- Poll the INIT_STS register to wait for the vBNG IP and DDR reset
completion.
- Refine log for debug: print UPL_version not only for vBNG bit stream,
but also for other bit streams.
Fixes: c01c748e4a ("net/ipn3ke: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Dan Wei <dan.wei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
