The "feature" BBDEV API is useless as all baseband drivers
must implement it by definition.
The non-implemented features should not be marked with "N".
Keeping them blank is clearer to read in the resulting matrix.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Removing the use of driver following PMD as its unnecessary.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for enqueue and dequeue the LDPC enc/dec
from the modem device.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
This patch add support for multiple modems by assigning
a modem id as dev args in vdev creation.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
This patch adds dev args to take max queues as input
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
This implements in PMD the option to drop the CB CRC
after 4G decoding to help transport block concatenation.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
This old script relied on deprecated stuff, and especially make.
It also applied some scary 666 permissions on files under /dev/vfio.
Its deprecation had been notified in a previous release, remove it.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Replace -w / --pci-whitelist with -a / --allow options
and --pci-blacklist with --block.
The -b short option remains unchanged.
Allow the old options for now, but print a nag
warning since old options are deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Adding reference to pf_bb_config in github to do
device configuration of the fpga_5gnr, fpga_lte and
acc100 devices and pmds.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Removing a feature table referring erroneously
to a PMD not present in DPDK.
Fixes: 65f1eec ("doc: add feature matrix table for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
DPDK APIs have to be prefixed with "rte_" in order to avoid
namespace pollution.
Let's fix it while fpga_lte_fec API is still experimental.
Fixes: efd453698c ("baseband/fpga_lte_fec: add driver for FEC on FPGA")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
DPDK APIs have to be prefixed with "rte_" in order to avoid
namespace pollution.
Let's fix it while fpga_5gnr_fec API is still experimental.
Fixes: 2d4306438c ("baseband/fpga_5gnr_fec: add configure function")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Adding capability for 4G encode and decoder processing
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Adding LDPC decode and encode processing operations
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add stubs for the ACC100 PMD
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
As decided in the Technical Board in November 2019,
the kernel module igb_uio is moved to the dpdk-kmods repository
in the /linux/igb_uio/ directory.
Minutes of Technical Board meeting:
https://mails.dpdk.org/archives/dev/2019-November/151763.html
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The build should be described only in few places,
in order to maintain up-to-date, accurate and detailed instructions.
This change is removing some of the unneeded repetitions.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jay Zhou <jianjay.zhou@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Adding missing overview page in documentation with
comparison of feature set by each available PMD implementation.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add configure function to configure the PF from within
the bbdev-test itself without external application
configuration the device.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Reviewed-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Adding LDPC processing operations and related documentation.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add stubs for the FPGA 5GNR FEC PMD
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The fpga_lte_fec is the only bbdev driver that does not use bbdev in the
name, so modify it to keep consistency with the other bbdev drivers. This
will then allow later simplification due to all drivers using the same
basic naming format.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This now includes steps to build with either
libraries for AVX2, or AVX512 or no dependency.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Change baseband device name:
- from turbo_sw to baseband_turbo_sw
- from bbdev_null to baseband_null
To keep backwards compatibility the old names are still valid
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Added a note to enable building as a shared lib.
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Support for optional CRC overlap in decode processing implemented
in Turbo Software driver
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Adjusting BaseBand drivers code to changes in FlexRAN 1.4.0:
- update usage of crc functions after API changes
Update the documentation describing Wireless Baseband Device:
- FlexRAN releases mapping table added
- download and build instructions for BBDEV turbo_sw driver in
compliance with FlexRAN 1.4.0 release added
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
- bbdev 'turbo_sw' is the software accelerated version of 3GPP L1
Turbo coding operation using the optimized Intel FlexRAN SDK libraries.
- 'turbo_sw' pmd is disabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- 'bbdev_null' is a basic pmd that performs a minimalistic
bbdev operation
- useful for bbdev smoke testing and in measuring the overhead
introduced by the bbdev library
- 'bbdev_null' pmd is enabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
