- Move External Exact and Exact Match to device module using HCAPI
to add and delete entries
- Make EM active through the device interface.
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Allow TCAM indexes to be allocated from top or bottom.
If the priority is set to 0, allocate from the
lowest tcam indexes i.e. from top. Any other value,
allocate it from the highest tcam indexes i.e. from
bottom.
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Implement the modules RM, Device (WH+), Identifier.
- Update Session module.
- Implement new HWRMs for RM direct messaging.
- Add new parameter check macro's and clean up the header includes for
i.e. tfp such that bnxt.h is not directly included in the new modules.
- Add cfa_resource_types, required for RM design.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add new bulk table type get using FW
to DMA the data back to host.
- Add flag to allow records to be cleared if possible
- Set mirror using tf_alloc_tbl_entry
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Introduce new modules for Device, Resource Manager, Identifier,
Table Types, and TCAM for multi device support.
Signed-off-by: Michael Wildt <michael.wildt@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Modify Exact Match insert and delete to use the HWRM messages directly.
Remove tunneled EM insert and delete message types.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add Exact Match support
- Create EM table pool of memory indices
- Insert exact match internal entry API
- Sends EM internal insert and delete request to firmware
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Apart from func_svif, func_id & vnic, port_db now stores and
retrieves func_spif, func_parif, phy_port_id, port_svif, port_spif,
port_parif, port_vport. New helper functions have been added to
support the same.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Issue HWRM_PORT_PHY_QCAPS to the firmware to get the physical
port count of the device.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
add helper functions to get port & function related information
like parif, physical port id & vport id.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support to query parent PF information (MAC address,
function ID, port ID and default VNIC) from firmware.
Current firmware returns zero for parent default vnic,
a temporary Wh+-specific workaround is included until
that can be fixed.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use 'first_vf_id' and the 'vf_id' that is input as part of adding
a representor to obtain the PCI function ID(FID) of the VF(VFR endpoint).
Use the FID as an input to FUNC_QCFG HWRM cmd to obtain the default
vnic ID of the VF.
Along with getting the default vNIC ID by supplying the FW FID of
the VF-rep endpoint to HWRM_FUNC_QCFG, obtain and store it's
function svif.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added code to support Tx/Rx from a VF representor port.
The VF-reps use the RX/TX rings of the Trusted VF/PF.
For each VF-rep, the Trusted VF/PF driver issues a VFR_ALLOC FW cmd that
returns "cfa_code" and "cfa_action" values.
The FW sets up the filter tables in such a way that VF traffic by
default (in absence of other rules) gets punted to the parent function
i.e. either the Trusted VF or the PF.
The cfa_code value in the RX-compl informs the driver of the source VF.
For traffic being transmitted from the VF-rep, the TX BD is tagged with
a cfa_action value that informs the HW to punt it to the corresponding
VF.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Defines data structures and code to init/uninit
VF representors during pci_probe and pci_remove
respectively.
Most of the dev_ops for the VF representor are just
stubs for now and will be will be filled out in next patch.
To create a representor using testpmd:
testpmd -c 0xff -wB:D.F,representor=1 -- -i
testpmd -c 0xff -w05:02.0,representor=[1] -- -i
To create a representor using ovs-dpdk:
1. First add the trusted VF port to a bridge
ovs-vsctl add-port ovsbr0 vf_rep1 -- set Interface vf_rep1 type=dpdk
options:dpdk-devargs=0000:06:02.0
2. Add the representor port to the bridge
ovs-vsctl add-port ovsbr0 vf_rep1 -- set Interface vf_rep1 type=dpdk
options:dpdk-devargs=0000:06:02.0,representor=1
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Setting Martin Spinler as new and only maintainer for Netcope
libsze2/nfb drivers
Signed-off-by: Jakub Neruda <neruda@netcope.com>
Acked-by: Martin Spinler <spinler@cesnet.cz>
When flow is inserted with meta match item it requires a certain
register support.
As part of the flow validation of such flows, the validation
function is missing a check that the mlx5 driver is not in
legacy mode in terms of extended meta data support
(MLX5_XMETA_MODE_LEGACY flag).
If the driver is in legacy mode it will cause downstream
function that allocates needed register for meta data.
The fix checks explicitly the conditions for support of
meta data in FDB mode. If the conditions are not met
an error message will be issued.
Fixes: 9bf26e1318 ("ethdev: move egress metadata to dynamic field")
Cc: stable@dpdk.org
Signed-off-by: Shy Shyman <shys@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch add the total input set byte number check,
as there is a hardware requirement for the total number
of 32 byte.
Fixes: 47d460d632 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add more specific tunnel type for ipv4/ipv6 packet,
it enable tcp/udp layer of ipv4/ipv6 as L4 payload but without
L4 dst/src port number as input set for the switch filter rule.
Fixes: 47d460d632 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add check for protocol type of IPv4 packet,
it need to update tunnel type when NVGRE is in payload.
Fixes: 6bc7628c5e ("net/ice: change default tunnel type")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch add more support for switch parser of PPPoE packet,
it enable parse tcp/udp L4 layer and ipv4/ipv6 L3 layer parser for
PPPoE payload, so we can use L4 dst/src port and L3 ip address as
input set for switch filter PPPoE related rule.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix the build error in DCF when CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC
compilation option is enabled. Legacy 16 byte Rx descriptor is not
supported in DCF. If it is enabled, DCF configuration stops.
Fixes: 929eceefab ("net/ice: add queue start and stop for DCF")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When the filter rule needs to use the TCAM method, driver
enables the TCAM filter switch, otherwise disables it, which
can improve the performance of microcode in FDIR scenarios that
does not use TCAM method.
Fixes: 1fe89aa37f ("net/hinic: add flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
When setting promiscuous or allmulticast mode, increase
multi-thread resource protection, because the patch
"net/bonding: prefer allmulti to promiscuous for LACP"
adds trying to use allmulti when adding a slave, and
EVS bond driver also sets promisc with another thread,
which may lead to thread reentry and cause failure to
set promiscuous mode.
Fixes: cb7b6606eb ("net/hinic: add RSS stats and promiscuous ops")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add output buffer and out size info for some cmds that use management
sync channel, which can improve dfx capability when sent msg failed.
Fixes: 7fcd6b05b9 ("net/hinic/base: support cmdq mechanism")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add device arguments to lock Rx/Tx contexts.
Application can either choose to lock Rx or Tx contexts by using
'lock_rx_ctx' or 'lock_tx_ctx' respectively per each port.
Example:
-w 0002:02:00.0,lock_rx_ctx=1 -w 0002:03:00.0,lock_tx_ctx=1
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds 'Scattered Rx' and 'Multiprocess aware' those are
supported by current hns3 PMD driver for feature list file named
hns3.ini and hns3_vf.ini.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Because of the hardware constraints, hns3 network engine doesn't support
sending packets with more than eight fragments. And hns3 pmd driver
tries to reassemble these kind of packets to meet hardware requirements.
Currently, there are two problems:
1) when the input buffer_len * 8 < pkt_len, the packets are impossible
to be reassembled into 8 Buffer Descriptors. In this case, the
packets will be passed to hardware, which eventually causes a
hardware reset.
2) The meta data in origin packets which are required to fill into the
descriptor haven't been copied into the reassembled pkts.
This patch adds a check for 1) to ensure such packets will be dropped by
driver and copies useful meta data from the origin packets to the
reassembled packets.
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Currently, rx_buf_size of hns3 PMD driver is fixed on, and it's value
depends on the firmware which will decrease the flexibility of PMD.
The receive side mbufs was allocated from the mempool given by upper
application calling rte_eth_rx_queue_setup API function. So the memory
chunk used for net device DMA is depend on the data room size of the
objects in this mempool. Hns3 PMD driver should set the rx_buf_len
smaller than the data room size of mempool and our hardware only support
the following four specifications: 512, 1024, 2148 and 4096.
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
According to the user manual of Kunpeng920 SoC, the max allowed number
of segments per whole packet is 63 and the max number of segments per
packet is 8 in datapath.
This patch reports the Two segment parameters of Tx descriptor
limitations to DPDK framework.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When the last driver exits abnormally, for example, it is killed by
'kill -9', it may be too late to clear the configuration and cause the
configuration to remain. Therefore, to ensure that the hardware
environment is clean during initialization, the PF driver actively clear
the hardware environment during initialization, including PF and
corresponding VFs' vlan, mac, flow table configurations, etc.
Fixes: d51867db65 ("net/hns3: add initialization")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
This patch optimizes the code to get device capability in primary
process, and moves the code of getting PCI revision id in order to avoid
evaluating the private hw->revision of shared PMD-specific private data
in slave process.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
This patch adds support setting VF PVID by hns3 PF kernel ethdev driver
on the host by "ip link set <eth num> vf <vf id> vlan <vlan tag>"
command.
Because of the hardware constraints, the striped VLAN tag will always in
Rx descriptors which should has been dropped when PVID is enabled and
the PVID will overwrite the outer VLAN tag in Tx descriptor. So, hns3
PMD driver need to change the processing of VLAN tags in the process of
Tx and Rx according to whether PVID is enabled.
1) If the hns3 PF kernel ethdev driver sets the PVID for VF device
before the initialization of the related VF device, hns3 VF PMD
driver should get the PVID state from PF driver through mailbox and
update the related state in txq and rxq maintained by hns3 VF driver
to change the process of Tx and Rx.
2) If the hns3 PF kernel ethdev driver sets the PVID for VF device after
initialization of the related VF device, the PF driver will notify VF
driver to update the PVID state. The VF driver will update the PVID
configuration state immediately to ensure that the VLAN process in Tx
and Rx is correct. But in the window period of this state transition,
packets loss or packets with wrong VLAN may occur.
3) Due to hardware limitations, we only support two-layer VLAN hardware
offload in Tx direction based on hns3 network engine, so when PVID is
enabled, QinQ insert is no longer supported. And when PVID is
enabled, in the following two cases:
i) packets with more than two VLAN tags.
ii) packets with one VLAN tag while the hardware VLAN insert is
enabled.
The packets will be regarded as abnormal packets and discarded by
hardware in Tx direction. For debugging purposes, a validation check
for these types of packets is added to the '.tx_pkt_prepare' ops
implementation function named hns3_prep_pkts to inform users that
these packets will be discarded.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Currently, hns3 PMD driver needs know the PVID configuration state and
do different processing in the 'rx_pkt_burst' ops implementation
function.
This patch adds a member to struct hns3_rx_queue/hns3_tx_queue of the
driver to indicate the PVID configuration status, so it isn't need
to access other data structure in the 'rx_pkt_burst' ops implementation,
to avoid performance loss because of reducing cache miss.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds support of LRO offload for hns3 PMD driver.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds support of symmetric algorithm of RSS.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
This fix has been added to address memory leak issues resulting from
triggering a sudden driver reset which does not allow us to follow our
normal removal flows for SW XLT entries for advanced features.
- Adding call to destroy flow profile locks when clearing SW XLT tables.
- Extraction sequence entries were not correctly cleared previously
which could cause ownership conflicts for repeated reset-replay calls.
Fixes: 969890d505 ("net/ice/base: enable clearing of HW tables")
Cc: stable@dpdk.org
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The ice_parse_caps function is used to convert the capability block data
coming from firmware into a structured format used by other parts of the
code.
The current implementation directly updates the hw->func_caps and
hw->dev_caps structures. It is directly called from within
ice_aq_discover_caps. This causes the discover_caps function to have the
side effect of modifying the hw capability structures, which is not
intuitive.
Split this function into ice_parse_dev_caps and ice_parse_func_caps.
These functions will take a pointer to the dev_caps and func_caps
respectively. Also create an ice_parse_common_caps for sharing the
capability logic that is common to device and function.
Doing so enables a future refactor to allow reading and parsing
capabilities into a local caps structure instead of modifying the
members of the hw structure directly.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The current implementation for reading device and function capabilities
from firmware, ice_aq_discover_caps, has potentially undesirable
side effects.
ice_aq_discover_caps calls ice_parse_caps, resulting in overwriting the
capabilities stored in the hw structure. This is ok during
initialization, but means that code which wants to read the capabilities
after initialization cannot use ice_aq_discover_caps without being
careful of the side effects.
Factor out the AQ command logic into a new ice_aq_list_caps function.
This will be used by the ice_aq_discover_caps function.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove unused macro and function.
Declare no external referenced function as static.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
To implement a FW workaround for LFC, a set_local_mib must be
performed after every link up event. For systems that do not
have DCB configured, we need to move the function
ice_aq_set_lldp_mib() from the DCB specific ice_dcb.c to
ice_common.c so that the driver always has access to this AQ
command.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
