These headers are used but not included explicitly, including them.
"arpa/inet.h" is included for 'htons' and friends.
"netinet/in.h" is included for 'IPPROTO_IP'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
In case of bnx2xvf pmd, tx packets can support vland id in 2 ways:
1. Setting the mbuf ol_flags=PKT_TX_VLAN_PKT and passing the
vlanid in mbuf->vlan_tci.
2. The tx packet itself has the vlan id included in the packet.
The first case is working as expected but the second case where
the vlan id is included in thetx packets itself was found not
working as expected. To handle that we need to properly set the
start_bd bitfield and the vlan_or_ethertype instead of setting it
to just the ethertype in case of VF.
Signed-off-by: Souvik Dey <sodey@rbbn.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
PMD handles fast path completions in the Rx handler and control path
completions in the interrupt handler. They both are processing
completions from the same fastpath completion queue. There is a
potential for race condition when these two paths are processing
the completions from the same queue and trying to updating Rx Producer.
Add a fastpath Rx lock between these two paths to close this race.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The fastpath task queue handler resets the fastpath scan flag
unconditionally, this patch changes that to reset the flag
only if it was set.
Fixes: 08a6e472c3 ("net/bnx2x: fix packet drop")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Use kernel headers for __le* types to avoid potential conflicts
resulting in redefinition errors for some Linux build environments.
Add check for FreeBSD execution environments.
Without this fix, aarch64 builds can fail with error below:
In file included from ../drivers/net/bnx2x/bnx2x.h:22,
from ../drivers/net/bnx2x/bnx2x_ethdev.c:8:
../drivers/net/bnx2x/bnx2x_osal.h:27:17: error:
conflicting types for ‘uint64_t’
#define __le64 uint64_t
^~~~~~~~
In file included from /usr/include/stdint.h:37,
from /usr/lib/gcc/aarch64-linux-gnu/8/include/stdint.h:9,
from ../lib/librte_eal/common/include/arch/arm/rte_byteorder.h:16,
from ../drivers/net/bnx2x/bnx2x.h:17,
from ../drivers/net/bnx2x/bnx2x_ethdev.c:8:
/usr/include/aarch64-linux-gnu/bits/stdint-uintn.h:27:20: note:
previous declaration of ‘uint64_t’ was here
typedef __uint64_t uint64_t;
^~~~~~~~
There is also one minor change mixed in this commit:
Some use of __FreeBSD__ are replaced by RTE_EXEC_ENV_FREEBSD.
Fixes: 38dff79ba7 ("net/bnx2x: update HSI")
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Tested-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Tested-by: Gavin Hu <gavin.hu@arm.com>
Use latest firmware 7.13.11.
7.13.11 FW changelog:
- Packets from a VF with pvid configured which were sent with a
different vlan were transmitted instead of being discarded.
- In some multi-function configurations, inter-PF and inter-VF
Tx switching is incorrectly enabled.
- Wrong assert code in FLR final cleanup in case it is sent not
after FLR.
- Chip may stall in very rare cases under heavy traffic with FW GRO
enabled.
- VF malicious notification error fixes.
- Default gre tunnel to IPGRE which allows proper RSS for IPGRE
packets, L2GRE traffic will reach single queue.
- Removes unnecessary internal mem config, latest FW performs this
autonomously.
Update the PMD version to 1.1.0.1.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update hardware software common base driver code in preparation to
update the firmware to version 7.13.11.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update and reorganize HW registers in preparation to update the firmware
to version 7.13.11.
Move HW_INTERRUT_ASSERT_SET_0 out from ecore_reg.h to bnx2x.h.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
For SRIOV, fastpath status blocks are not allocated resulting in
segfault. Separate out fastpath DMA allocation/free from rest of
memory allocation/free. It is now done as part of NIC load/unload.
Comment indentation changes in bnx2x_alloc_hsi_mem() and
bnx2x_free_hsi_mem() APIs.
Fixes: f0219d98de ("net/bnx2x: fix interrupt flood")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The logic to read vf_id used by ACQUIRE/TEARDOWN_Q/RELEASE TLVs,
multiplexed return value to convey vf_id value and status of read vf_id
API. This lets to segfault at dev_start() as resources are not properly
cleaned and re-allocated.
Fix read vf_id API to differentiate between vf_id value and return
status. Adjust the status checking accordingly.
Added bnx2x_vf_teardown_queue() API and moved relevant code from
bnx2x_vf_unload() to new API.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
PMD sets up and clears the slow path interrupt status block in dev_start
and dev_stop flow and slow path interrupt status block DMA memory for
device is allocated in dev_configure flow.
This situation creates a state where, after dev_stop is called, and if
there is a slow path interrupt from device, PMD sees the old value of
status block consumer in dev_start flow, since DMA memory for status
block belongs to old configuration and dev_start will result in
new slow path interrupt status block configuration.
And since PMD fails to ack new slow path interrupt with correct status
block consumer value, device continues to trigger interrupt causing an
interrupt flood.
Fix is to create and destroy status block DMA memory in dev_start and
dev_stop flow instead of dev_configure and dev_close flow.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Patch "8bd31421c593 ("net/bnx2x: fix ramrod timeout")"
introduced a regression where sc->scan_fp flags is
set for unexpectedly long time. So the slow path completion
handler flow is run unnecessarily which walks over receive
descriptor ring of fast path and drops the data packets while looking
for slow path completion descriptor out of fast path ring.
This issue is seen under heavy traffic with link events happening
in background.
Fixes: 8bd31421c5 ("net/bnx2x: fix ramrod timeout")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable the optic module vendor and part number verification from driver
by setting appropriate flags. Link handling module in conjunction with
FW performs optic module verification.
Without this fix the SFP is powered down and the link doesn't come up,
if module verification is enforced in nvram setting.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
There is a race condition while processing RAMROD
completion in fast path queue through interrupt handler
and polling method.
Interrupt handler invoked from actual interrupt event
and from RAMROD processing polling flow may create a
situation where one flow will read and clear a fastpath
interrupt without actually processing the RAMROD completion.
Thus, causing a RAMROD timeout even though HW sent an
completion event.
Fix this by introducing an atomic variable which will be
set only when interrupt handler needs to process RAMROD
completion.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
We allocate DMA memory but never free after using it.
Add function to free DMA memory.
Fixes: b5bf771922 ("bnx2x: driver support routines")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
strcat does not check the destination length and there might be
chances of string overflow so instead of strcat, strlcat is used.
Fixes: 540a211084 ("bnx2x: driver core")
Fixes: e163c18a15 ("net/i40e: update ptype and pctype info")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Previous ungraceful exit may leave behind un-acked stale
interrupts for slowpath and fastpath.
Interrupt status polling function is started before FLR is
initiated, so we don't have a real way to protect this polling
function invoking an interrupt handler caused due to stale
interrupt status from previous ungraceful exit.
So, check uninitialized status block variables in interrupt
handling path which may lead to segfault.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Reduced number of INFO logs in BNX2X PMD by converting some INFO
logs to DEBUG and few NOTICE logs to INFO, removing extra new lines,
printing banner bar once for the adapter and device specific info.
Fixes: ba7eeb035a ("net/bnx2x: fix logging to include device name")
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
In general the VF driver should not access the chip. For VF link status
update, VF driver should not use HW lock, use bnx2x_link_report_locked()
instead.
Add few prints for releasing previously held HW locks.
Fixes: a9b58b15ed ("net/bnx2x: fix to add PHY lock")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch adds phy_lock, acquire/release the lock when performing
PHY transactions. Without this fix driver can run into synchronization
issues with management FW when modifying PHY settings.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to disable further fastpath/slowpath interrupts. These will be
enabled again by their respective handlers
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix PMD logging scheme to include device name in the messages printed.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
We were using LICENSE.bnx2x_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.bnx2x_pmd file and
directly include SPDX tags in source files.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The PMD has been modified to invoke the polling function in the link
management code which detects the peer speed/mode, configure the link
and update the status accordingly. This patch is the fix for the link
down issue seen when we do dev_stop() and dev_start() from an
application.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch fixes firmware command timeout error seen during device stop
while stopping queues. It patially reverts an earlier preventive change
commit 91b7e432bc ("net/bnx2x: disable fast path interrupts") to now
enable fast path interrupts.
The original issue of performance degradation is not observed anymore,
with or without the fix.
Fixes: 91b7e432bc ("net/bnx2x: disable fast path interrupts")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch provides a fix for PCI function level reset after an
ungraceful exit from an application. The fix is to enable internal
target read as part of device attach before getting device information
from device config space, device itself and shared memory. In addition
to that, add a 200ms delay for the recovery flow to complete.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Check if promisc mode was set when setting allmulti mode and vice-versa.
Introduced BNX2X_RX_MODE_ALLMULTI_PROMISC for the same. If check is
absent the filter configuration gets over written.
Fixes: 540a211084 ("bnx2x: driver core")
Fixes: 5dbc53d7e5 ("net/bnx2x: restrict Rx mask flags sent to the PF")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Don't use bnx2x_fill_accept_flags() to fill the RX mask in the VF
since the PF only handles a subset of the existing flags. now,
bnx2x_fill_accept_flags() can be static.
Fixes: 540a211084 ("bnx2x: driver core")
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
ELINK_INCLUDE_EMUL and ELINK_INCLUDE_FPGA are never defined. Remove them
along with enumeration constants dependent on their inclusion.
Fixes: 540a211084 ("bnx2x: driver core")
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
When the DMA allocation routine is invoked in the context of a non-EAL
thread, the API rte_lcore_id() returns -1 and indexing on that in
rte_lcore_to_socket_id() leads to segfault. The fix is to use
SOCKET_ID_ANY as the socket_id for all slowpath memory allocation.
Fixes: 540a211084 ("bnx2x: driver core")
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
