Application calculates segment size based on buffer size plus
digest size only, But if the operation mode is IPsec then
packet length can be increased by some more bytes depending on
the algorithm.
In this patch, increasing segment size with RTE_PKTMBUF_HEADROOM
when there is no user given segment size.
Fixes: 28dde5da50 ("app/crypto-perf: support lookaside IPsec")
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Convert rte_atomic_test_and_set usage to compiler atomic
CAS operation for display sync in crypto cases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
While populating the crypto ops in case of asymmetric, result
is being allocated from stack. This is causing crash in the
application. And operation type is also not being initialized
properly. Adding a fix by allocating the result from global
memory and initialized the operation memory properly.
Fixes: ba588ce3f9 ("test/crypto-perf: test asymmetric crypto throughput")
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch fixes a possible buffer overrun problem in crypto perf test.
Previously when user configured AAD size is over 12 bytes the copy
of template AAD will cause a buffer overrun.
The problem is fixed by only copy up to 12 bytes of AAD template.
Fixes: 8a5b494a7f ("app/test-crypto-perf: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Przemyslaw Zegan <przemyslawx.zegan@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Added support for asymmetric crypto perf throughput test.
Only modex is supported for now.
One new optype has been added.
--optype modex
./dpdk-test-crypto-perf -c 0x3 -- --devtype crypto_cn9k --optype modex
--ptest throughput
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch add support to handle PDCP short MAC-I domain
along with standard control and data domains as it has to
be treaty as special case with PDCP protocol offload support.
ShortMAC-I is the 16 least significant bits of calculated MAC-I. Usually
when a RRC message is exchanged between UE and eNodeB it is integrity &
ciphered protected.
MAC-I = f(key, varShortMAC-I, count, bearer, direction).
Here varShortMAC-I is prepared by using (current cellId, pci of source cell
and C-RNTI of old cell). Other parameters like count, bearer and
direction set to all 1.
crypto-perf app is updated to take short MAC as input mode.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add missing rte_mbuf size in mempool allocation for
out-of-place operation.
Fixes: bf9d6702ec ("app/crypto-perf: use single mempool")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
- Disable unsupported apps on Windows
- Enable building of testpmd on Windows
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Return value of a function 'rte_zmalloc' is dereferenced without
checking, and it may call segmentation fault.
This patch fixed it.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
As with the lib and drivers directories, we can use "continue" keyword to
reduce the indentation level of the majority of the foreach block. At the
same time, we can also replace tab indentation with spaces.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds closing of the PMD after running the benchmark.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Some applications were printing useless messages with rte_exit()
after showing the help. Using exit() is enough in this case.
Some applications were using a redundant printf or fprintf() before
calling rte_exit(). The messages are unified in a single rte_exit().
Some rte_exit() calls were missing a line feed or returning a wrong code.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
The crypto perf graphing script did not handle parsing parameters
from the JSON config files correctly.
A common parsing function is used for both EAL and app parameters,
to ensure they are handled the same way and to reduce code duplication.
Short parameters are now passed with the value being a second argument,
rather than as one argument with dividing space.
Long parameters with no expected value are supported for EAL now also.
e.g. "--no-huge" can be added to config as "no-huge": true
Fixes: f400e0b82b ("app/crypto-perf: add script to graph perf results")
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
The python script introduced in this patch runs the crypto performance
test application for various test cases, and graphs the results.
Test cases are defined in config JSON files, this is where parameters
are specified for each test. Currently there are various test cases for
devices crypto_qat, crypto_aesni_mb and crypto_gcm. Tests for the
ptest types Throughput and Latency are supported for each.
The results of each test case are graphed and saved in PDFs (one PDF for
each test suite graph type, with all test cases).
The graphs output include various grouped barcharts for throughput
tests, and histogram and boxplot graphs are used for latency tests.
Documentation is added to outline the configuration and usage for the
script.
Usage:
A JSON config file must be specified when running the script,
"./dpdk-graph-crypto-perf <config_file>"
The script uses the installed app by default (from ninja install).
Alternatively we can pass path to app by
"-f <rel_path>/<build_dir>/app/dpdk-test-crypto-perf"
All device test suites are run by default.
Alternatively we can specify by adding arguments,
"-t latency" - to run latency test suite only
"-t throughput latency"
- to run both throughput and latency test suites
A directory can be specified for all output files,
or the script directory is used by default.
"-o <output_dir>"
To see the output from the dpdk-test-crypto-perf app,
use the verbose option "-v".
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
The csv output for each ptest type used ";" instead of ",".
This has now been fixed to use the comma format that is used in the csv
headers.
Fixes: f6cefe253c ("app/crypto-perf: add range/list of sizes")
Fixes: 96dfeb609b ("app/crypto-perf: add new PMD benchmarking mode")
Fixes: da40ebd6d3 ("app/crypto-perf: display results in test runner")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
The csv output for the latency performance test had an extra header,
"Packet Size", which is a duplicate of "Buffer Size", and had no
corresponding value in the output. This is now removed.
Fixes: f6cefe253c ("app/crypto-perf: add range/list of sizes")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Fixes some spelling errors in app logs and help text.
Fixes: 7da018731c ("app/crypto-perf: add help option")
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This is already 'else' leg of the opposite comparison, simple 'else'
will be logically same.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Use the newer macros defined by meson in all DPDK source code, to ensure
there are no errors when the old non-standard macros are removed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
As discussed on the dpdk-dev mailing list[1], we can make some easy
improvements in standardizing the naming of the various components in DPDK,
and their associated feature-enabled macros.
Following this patch, each library will have the name in format,
'librte_<name>.so', and the macro indicating that library is enabled in the
build will have the form 'RTE_LIB_<NAME>'.
Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the
device type taken from the relevant driver subdirectory name, i.e. 'net',
'crypto' etc.
To avoid too many changes at once for end applications, the old macro names
will still be provided in the build in this release, but will be removed
subsequently.
[1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
A number of lib and driver dependencies for various apps were missed on
build because the proper macro names for their use were mismatched between
meson and make build systems. Before adding in equivalent compatibility
macros we need to ensure to add the proper dependencies to ensure a valid
build.
Fixes: 16ade738fd ("app/testpmd: build with meson")
Fixes: b5dc795a8a ("test: build app with meson as dpdk-test")
Fixes: 996ef11761 ("app: add all remaining apps to meson build")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The API ``rte_security_session_create`` takes only single
mempool for session and session private data. So the
application need to create mempool for twice the number of
sessions needed and will also lead to wastage of memory as
session private data need more memory compared to session.
Hence the API is modified to take two mempool pointers
- one for session and one for private data.
This is very similar to crypto based session create APIs.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Reviewed-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
This patch replaces the usage of the word 'slave' with more
appropriate word 'worker' in QAT PMD and Scheduler PMD
as well as in their docs. Also the test app was modified
to use the new wording.
The Scheduler PMD's public API was modified according to the
previous deprecation notice:
rte_cryptodev_scheduler_slave_attach is now called
rte_cryptodev_scheduler_worker_attach,
rte_cryptodev_scheduler_slave_detach is
rte_cryptodev_scheduler_worker_detach,
rte_cryptodev_scheduler_slaves_get is
rte_cryptodev_scheduler_workers_get.
Also, the configuration value RTE_CRYPTODEV_SCHEDULER_MAX_NB_SLAVES
was renamed to RTE_CRYPTODEV_SCHEDULER_MAX_NB_WORKERS.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds support for DOCSIS and PDCP security protocols to the
pmd-cyclecount mode of the crypto performance tool. Adding this support
involves freeing the correct session type (i.e. security or cryptodev
session) when the test ends, depending on the op_type specified.
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Set the source mbuf data and packet lengths correctly for DOCSIS
performance tests.
Fixes: d4a131a949 ("test/crypto-perf: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The RTE_CRYPTODEV_FF_SECURITY feature was disabled through the
ff_disable device configuration option for all crypto performance tests,
including security related tests. This patch updates the crypto
performance tool to not disable RTE_CRYPTODEV_FF_SECURITY for DOCSIS and
PDCP security tests.
Fixes: d4a131a949 ("test/crypto-perf: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add a new option for PDCP cases to enable use of session
based fixed HFN value instead of per packet HFN which was
enabled by hfn override feature.
By default HFN override is enabled and if session based
fixed HFN need to be tested, add "--pdcp-ses-hfn-en" in the
command line.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch disables displaying sample test vector contents when
executing throughput and latency tests as the sample data is not
used in those tests (not copied to input mbuf in order to achieve
better performance).
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The macros RTE_MIN and RTE_MAX can be used in DPDK applications.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In AEAD decrypt (verify mode), test data should point to
cipher text instead of plain text
Fixes: 5b2b0a740f ("app/crypto-perf: overwrite mbuf when verifying")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Segmented frames not supported for out-of-place case.
This patch returns err if such config is requested.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Asymmetric crypto is not required for test-crypto-perf application.
Disabling the feature using 'ff_disable' field.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Shally Verma <shallyv@marvell.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Currently, there's no return status check from lcore's jobs.
In case of fail - crypto-perf tool returns success anyway.
This patch adds such a detection and returns proper status at the end.
Fixes: ce8af1a439 ("app/crypto-perf: wait for cores launched by app")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tjozwiakgm@gmail.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch changes 'only_once' variable to 'display_once',
which should be atomic type due to fact, that all runner functions
can be executed in paraller way on different lcores.
Fixes: df52cb3b6e ("app/crypto-perf: move verify as single test type")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tjozwiakgm@gmail.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Adding a new field, ff_disable, to allow applications to control the
features enabled on the crypto device. This would allow for efficient
usage of HW/SW offloads.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The format for printing float is incorrect for the following fields
in pmd-cyclecount test: Cycles/Op,Cycles/Enq,Cycles/Deq.
Currently, the format is %.f3. This format will round off the number to
the nearest integer and append a 3 after that.
This patch changes the format to %.3f. This will print the number as a
floating point with a precision of 3 fractional digits.
Fixes: 96dfeb609b ("app/crypto-perf: add new PMD benchmarking mode")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
The socket_id is used as an array index so should be within the range
of zero to max numa nodes. Add a range check to ensure we don't get
excessive values.
Coverity issue: 336812
Coverity issue: 336829
Fixes: 2c59bd32b7 ("cryptodev: do not create session mempool internally")
CC: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch uses the two session mempool approach to crypto perf
application. One mempool is for session header objects, and the other
is for session private data.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch changes the cryptodev queue pair configure structure
to enable two mempool passed into cryptodev PMD simutaneously.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds telemetry as a dependecy to all applications. Without these
changes, the --telemetry flag will not be recognised and applications will
fail to run if they want to enable telemetry.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The field, 'cipher_iv.data' is allocated twice when cipher is not null.
Ideally the allocation should depend only on the field
'cperf_options.cipher_iv_sz'. This will make sure this code path gets
valid for ciphers which doesn't require IV.
Fixes: 0fbd75a99f ("cryptodev: move IV parameters to session")
Cc: stable@dpdk.org
Signed-off-by: Akash Saxena <akash.saxena@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
