The completed variable is used for debug logs even though clang 13
reports it as unused.
Bugzilla ID: 881
Fixes: c3ecdbb376 ("vmxnet3: support TSO")
Cc: stable@dpdk.org
Reported-by: Liang Longfeng <longfengx.liang@intel.com>
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
eicr serves as a placeholder for some read-on-clear nic register.
clang 13 reports it as unused.
Bugzilla ID: 881
Fixes: b7311360fb ("net/txgbe: support VF interrupt")
Cc: stable@dpdk.org
Reported-by: Liang Longfeng <longfengx.liang@intel.com>
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reported by clang 13.
This patch removes the inflights variable from the sw_dump function
within the software section of the event driver as it is an unused but
set variable.
Bugzilla ID: 881
Fixes: c66baa68e4 ("event/sw: add dump function for easier debugging")
Cc: stable@dpdk.org
Reported-by: Liang Longfeng <longfengx.liang@intel.com>
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reported by clang 13.
This patch removes the device_count variable from the rte_fslmc_scan
function within the fslmc bus driver as it is an unused but set variable.
Bugzilla ID: 881
Fixes: 828d51d8fc ("bus/fslmc: refactor scan and probe functions")
Cc: stable@dpdk.org
Reported-by: Liang Longfeng <longfengx.liang@intel.com>
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
run_rss_calc() is used to compare the number of cycles spent computing a
hash value for different implementations.
clang 13 reports the hash variable as being unused, but run_rss_calc()
needs this variable as a placeholder for computing the hash value.
Bugzilla ID: 881
Fixes: 239fffe040 ("test/thash: add performance tests for Toeplitz hash")
Reported-by: Liang Longfeng <longfengx.liang@intel.com>
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reported by clang 13.
This patch removes the us variable from the qat_pf2vf_exch_msg function
within the PF to VF section of the QAT driver as it is an unused but set
variable.
Bugzilla ID: 881
Fixes: b17d16fb47 ("common/qat: add PF to VF communication")
Reported-by: Liang Longfeng <longfengx.liang@intel.com>
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The --meter section used wrong indentation previously.
Fixes: 6a2cf58a04 ("app/flow-perf: support meter action")
Cc: stable@dpdk.org
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
The flow perf application uses the srtcm_rfc2697 as meter profile
while doing the meter testing.
This patch adds new configuration parameter '--packet-mode' to
generate the meter flows with packet cir instead of byte cir.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Change meter-cir option to meter-profile to cover user input for CIR,
CBS & EBS values.
The usage is as below:
--meter-profile=N1,N2,N3 default value is 1250000 156250 0.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Add option "policy-mtr" to indicate if meter creation will include policy
or not. Meter creation will keep unchanged without it.
With "policy-mtr", the policy is introduced. API create_meter_policy
is to create a policy. API create_meter_rule will use it to create
a meter. The value of it is used to specify meter policy actions.
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
With flow_options defined as global struct, it's possible
to use sub-functions to handle run-time options.
It's helpful to avoid too many tabs warnings.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Add support for Address Sanitizer (ASan) for PPC/POWER architecture.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This is probably due a s/red/rte_red/ a long time ago.
Fixes: de3cfa2c98 ("sched: initial import")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@yahoo.com>
The l3fwd example should use the reserved IPv4/v6 reserved address
ranges defined in RFC5735, RFC5180 and RFC863 discard protocol for
the port number in the exact match mode of L3 forwarding.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Since the number of Ethernet ports have gone up, print the device name
(which for PCI devices is the BDF triplet), along with the routes.
This is also helpful for cases where allow listing order is not honored.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Increase the number of routes from 8 to 16 that are statically added for
lpm and em mode as most of the SoCs support more than 8 interfaces.
The number of routes added is equal to the number of ethernet devices
ports enabled through port mask.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Since v0.4.0, if the underlying kernel supports it, libbpf uses 'bpf
link' to manage the programs on the interfaces of the XDP sockets (xsks).
This is not compatible with the PMD's custom XDP program loading feature
which uses the netlink-based method for loading custom programs.
The conflict arises when libbpf searches for a custom program on the
interface using bpf link, but doesn't find one because the netlink
method was used. libbpf then proceeds to try to load the default program
on the interface, but fails due to the presence of the custom program.
To work around this, the PMD now uses the
XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD flag which prevents libbpf from
attempting to search for or load a program. One repercussion is that
DPDK must now insert the xsk into the xsks_map as this was previously
handled by libbpf during the routines for program loading/probing.
Ideally, the PMD would use bpf link to load the custom program, however
at present there is no convenient and reliable way of detecting whether
the underlying kernel supports bpf link. Perhaps this may become
available in a future libbpf release, at which point we can switch the
PMD over to the new bpf link based method.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
The commit ae70cc6e89 ("net/af_xdp: use BPF link for XDP programs")
caused compilation errors on kernels older than v5.8 due to absence of
the bpf_link_info struct and some definitions in the linux/bpf.h header.
Since relying on the reported kernel version is not a robust solution
and also since there doesn't appear to be a suitable definition in the
bpf header that the preprocessor could rely on to determine support for
bpf link, we will take a different approach to solving the issue that
the original patch attempted to solve. The next commit will address
this.
Fixes: ae70cc6e89 ("net/af_xdp: use BPF link for XDP programs")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
When set port DCB in VT mode enabled, it should remove RSS HASH
offload before reconfiguring the device and queues.
Because port multi-queue mode is changed from RSS to DCB in VT.
Fixes: 2a977b891f ("app/testpmd: fix DCB configuration")
Cc: stable@dpdk.org
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Remove the szedata2 device driver as the platform is no longer
supported.
Signed-off-by: Martin Spinler <spinler@cesnet.cz>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The 'proc_id' should be less than 'num_procs', if not, exit the testpmd
and show the error message.
Fixes: a550baf24a ("app/testpmd: support multi-process")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds Rx/Tx queue configuration setup operations.
On packet reception the respective BD Ring status bit is set
which is then used for packet processing.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Implemented the fec-uio driver in kernel. enetfec PMD uses
UIO interface to interact with "fec-uio" driver implemented in
kernel for PHY initialisation and for mapping the allocated memory
of register & BD from kernel to DPDK which gives access to
non-cacheable memory for BD.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The attribute to record the global control of hairpin queues' delay
drop was defined as a bit-field with one bit, and the intention was
to reduce the memory overhead. In the meanwhile, the macro was
defined as an enumerated value 0x2.
No matter what value inputted via devarg, the lowest bit was always
zero and the higher bits would be ignored. For hairpin queues, the
delay drop attribute couldn't be enabled.
With the commit, the double logical negation is used to fix this.
Fixes: febcac7b46 ("net/mlx5: support Rx queue delay drop")
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
There was a redundant check for the enabled E-Switch, this
resulted in device probing failure if the Tx scheduling was
requested and E-Switch was enabled.
Fixes: f17e4b4ffe ("net/mlx5: add Tx scheduling check on queue creation")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch fixes coverity issue by directly passing the address
of the meta data to subfunction.
Coverity issue: 373867
Fixes: 5ad3db8d4b ("net/ice: enable advanced RSS")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The memory allocated for temporarily keeping DPTR need to be freed after
operation.
Also, dptr need to be aligned to 8B.
Fixes: 71213a8b77 ("common/cnxk: support CPT CTX write through microcode op")
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Reviewed-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Tejasree Kondoj <ktejasree@marvell.com>
The pointer passed to the rq_ctx and sq_ctx functions was the address
of qctx. Instead of that qctx should be passed. This patch fixes this.
This patch also resolves warning observed with gcc 12 compiler.
log:
../drivers/common/cnxk/cnxk_telemetry.h:12:38:
warning: array subscript
‘struct nix_cn10k_sq_ctx_s[0]’ is partly outside array bounds of
‘volatile void[8]’ [-Warray-bounds]
Bugzilla ID: 853
Fixes: af75aac789 ("common/cnxk: support telemetry for NIX")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Reviewed-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
This patch fixes coverity issue by directly passing the address
of the meta data to lower function.
Coverity issue: 373867
Fixes: 7be10c3004 ("net/iavf: add RSS configuration for VF")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Wrong offset used to clear the extended stats section resulting
in eth stats not being reset.
Fixes: ccb49b834c ("net/iavf: support xstats for inline IPsec crypto")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Rx descriptor is 16B/32B in size. If the DD bit is set, it indicates
that the rest of the descriptor words have valid values. Hence, the
word containing DD bit must be read first before reading the rest of
the descriptor words.
Since the entire descriptor is not read atomically, on relaxed memory
ordered systems like Aarch64, read of the word containing DD field
could be reordered after read of other words.
Read barrier is inserted between read of the word with DD field
and read of other words. The barrier ensures that the fetched data
is correct.
Testpmd single core test showed no performance drop on x86 or N1SDP.
On ThunderX2, 22% performance regression was observed.
Fixes: 7b0cf70135 ("net/i40e: support ARM platform")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
DCF tries to handle AdminQ when DCF is reset by PF, however the invalid
data may be returned, and error log may be output in this situation.
This patch stops handling AdminQ when a passive reset is detected to
avoid this situation.
Fixes: 7564d55096 ("net/ice: add DCF hardware initialization")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The ConnectX NIC series hardware provides only 63-bit
wide timestamps. The imposed limitations description
added to documentation.
At the moment there are no affected applications known
or bug reports neither, this is just the declaration
of limitation.
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The routine converting RTE flow modify field action into
field driver's presentation did not specify the field mask
correctly and this resulted into wrong conversion for
the actions with shifted fields.
Fixes: 40c8fb1fd3 ("net/mlx5: update modify field action")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The structure of the striding RQ(MPRQ) buffer includes an array size
defined by the RTE_PKTMBUF_HEADROOM macro added in [1].
When RTE_PKTMBUF_HEADROOM is set to 0 in the compilation config file
the compilation with debug type failed:
"In file included from ../drivers/common/mlx5/mlx5_common.h:25,
from ../drivers/common/mlx5/linux/mlx5_nl.h:12,
from ../drivers/common/mlx5/linux/mlx5_nl.c:22:
../drivers/common/mlx5/mlx5_common_mr.h:96:10: error: ISO C forbids
zero-size array 'pad' [-Werror=pedantic]"
Actually, the array for the first stride headroom is not needed:
Each stride in the striding RQ buffer includes the headroom of the next
stride, so the headroom of the first stride should be allocated before
the starting point of the buffer posted to the HW(HW buffer).
The striding RQ buffer is used as an attached buffer to mbuf and have
shared information per stride.
The LRO support moved all the strides shared information to the top of
the buffer before the first stride headroom but didn't remove the old
memory of this headroom from the buffer.
Remove the old headroom memory from the striding RQ buffer.
[1] commit 7d6bf6b866 ("net/mlx5: add Multi-Packet Rx support")
Fixes: 3a22f3877c ("net/mlx5: replace external mbuf shared memory")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The global redirection table is used to create the default flow
rules for the ingress traffic with the lowest priority. It is also
used to create the default RSS rule in the destination table when
there is a tunnel offload.
To update the RETA in-flight, there is no restriction in the ethdev
API. In the previous implementation of mlx5, a port restart was
needed to make the new configuration take effect.
The restart is heavy, e.g., all the queues will be released and
reallocated, users' rules will be flushed. Since the restart is
internal, there is a risk to crash the application when some change
in the ethdev is introduced but no workaround is done in mlx5 PMD.
The users' rules, including the default miss rule for tunnel
offload, should not be impacted by the RETA update. It is improper
to flush all rules when updating RETA.
With this patch, only the default rules will be flushed and
re-created with the new table configuration.
Fixes: 3f2fe392bd ("net/mlx5: fix crash during RETA update")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
For the flows containing sample action, the tag action was added
implicitly to store the unique flow index into metadata register in the
split prefix subflow, and then match on this index in the split suffix
subflow. The metadata register for flow index of sample split subflows
was also used to store application metadata TAG 0 item, this might cause
TAG 0 corruption in the flows with sample actions.
This patch uses the same metadata register C index as used for
ASO action since it's reserved and not used directly by the application,
and adds the checking in validation to make sure not to conflict
with ASO CT in the same flow.
Fixes: b4c0ddbfcc ("net/mlx5: split sample flow into two sub-flows")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Tunnel offload API allows the application to restore packet to
its original form if the chain of flows is missed after DECAP action.
MLX5 PMD provides tunnel offload support only if DV API was enabled.
The patch verifies DV availability before processing with
tunnel offload tasks.
Fixes: 4ec6360de3 ("net/mlx5: implement tunnel offload")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
