This patch implements API for configuration and
validation of max size for LRO aggregated packet.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some PMDs cannot work when certain offloads are enable/disabled, as a
workaround PMDs auto enable/disable offloads internally and expose it
through dev->data->dev_conf.rxmode.offloads.
After device specific dev_configure is called compare the requested
offloads to the offloads exposed by the PMD and, if the PMD failed
to enable a given offload then log it and return -EINVAL from
rte_eth_dev_configure, else if the PMD failed to disable a given offload
log and continue with rte_eth_dev_configure.
Suggested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add new Rx offload flag `DEV_RX_OFFLOAD_RSS_HASH` which can be used to
enable/disable PMDs write to `rte_mbuf:#️⃣:rss`.
PMDs notify the validity of `rte_mbuf:#️⃣rss` to the application
by enabling `PKT_RX_RSS_HASH ` flag in `rte_mbuf::ol_flags`.
Also update testpmd rx_offload command to include RSS_HASH
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add `rte_eth_dev_set_ptypes` function that will allow the application
to inform the PMD about reduced range of packet types to handle.
Based on the ptypes set PMDs can optimize their Rx path.
-If application doesn’t want any ptype information it can call
`rte_eth_dev_set_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
and PMD may skip packet type processing and set rte_mbuf::packet_type to
RTE_PTYPE_UNKNOWN.
-If application doesn’t call `rte_eth_dev_set_ptypes` PMD can return
`rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
-If application is interested only in L2/L3 layer, it can inform the PMD
to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
`rte_eth_dev_set_ptypes(ethdev_id,
RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The dynamic mbuf fields were introduced by [1]. The egress metadata is
good candidate to be moved from statically allocated field tx_metadata to
dynamic one. Because mbufs are used in half-duplex fashion only, it is
safe to share this dynamic field with ingress metadata.
The shared dynamic field contains either egress (if application going to
transmit mbuf with tx_burst) or ingress (if mbuf is received with rx_burst)
metadata and can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_TX_DYNF_METADATA/PKT_RX_DYNF_METADATA flag will be set
along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior accessing the data.
The availability of dynamic mbuf metadata field can be checked with
rte_flow_dynf_metadata_avail() routine.
DEV_TX_OFFLOAD_MATCH_METADATA offload and configuration flag is removed.
The metadata support in PMDs is engaged on dynamic field registration.
Metadata feature is getting complex. We might have some set of actions
and items that might be supported by PMDs in multiple combinations,
the supported values and masks are the subjects to query by perfroming
trials (with rte_flow_validate).
[1] http://patches.dpdk.org/patch/62040/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Change the type of burst mode information from bit field to free string
data, so that each PMD can describe the Rx/Tx busrt functions flexibly.
Fixes: eb5902504a13 ("ethdev: add API for getting burst mode information")
Fixes: 6b6609f68ccd ("net/i40e: support Rx/Tx burst mode info")
Fixes: e9a10e6c2102 ("net/ice: support Rx/Tx burst mode info")
Fixes: 7fe108edcf53 ("app/testpmd: show Rx/Tx burst mode description")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The function rte_eth_dev_count() was marked as deprecated in DPDK 18.05
in commit d9a42a69febf ("ethdev: deprecate port count function").
It was planned to be removed after 19.11 LTS release,
but given we must not break ABI between 19.11 and 20.11,
it is removed now.
Note the ABI version is not dumped in this commit
because other changes already did.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
This commit introduce hairpin queue type.
The hairpin queue in build from Rx queue binded to Tx queue.
It is used to offload traffic coming from the wire and redirect it back
to the wire.
There are 3 new functions:
- rte_eth_dev_hairpin_capability_get
- rte_eth_rx_hairpin_queue_setup
- rte_eth_tx_hairpin_queue_setup
In order to use the queue, there is a need to create rte_flow
with queue / RSS action that targets one or more of the Rx queues.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The include for rte_ether.h in each of these files should not use
quotes, as the header file is not in the librte_ethdev directory.
These are now updated to use <> symbols, to search directories
pre-designated by the compiler.
Fixes: 57668ed7bc08 ("net: move ethernet definitions to the net library")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The promiscuous enable and disable functions now check the
promiscuous state of the device before checking if the dev_ops
function exists for the device.
This change is necessary to allow sample applications run on
virtual PMDs, as previously -ENOTSUP returned when the promiscuous
enable function was called. This caused the sample application to
fail unnecessarily.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch reserves several bits as input set selection from the
high end of the 64 bits. It is combined with exisiting ETH_RSS_*
to represent RSS types. This patch also checks the simultaneous
use of SRC_ONLY and DST_ONLY of the same level.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Some PMDs have more than one Rx/Tx burst paths, add the ethdev API
that allows an application to retrieve the mode information about
Rx/Tx packet burst such as Scalar or Vector, and Vector technology
like AVX2.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use correct flag for indicating QinQ strip rx offload.
Fixes: dfebfc9882fb ("ethdev: support dynamic configuration of QinQ strip")
Cc: stable@dpdk.org
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since driver callbacks return status code now, there is no necessity
to enable or disable all-multicast mode once again if it is already
successfully enabled or disabled.
Configuration restore at startup tries to ensure that configured
all-multicast mode is applied and start will return error if it fails.
Also it avoids theoretical cases when already configured all-multicast
mode is applied once again and fails. In this cases it is unclear
which value should be reported on get (configured or opposite).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_dev_owner_delete() return value from void to int
and return negative errno values in case of error conditions.
Right now there is only one error case for rte_eth_dev_owner_delete() -
invalid owner, but it still makes sense to return error to catch bugs
in the code which uses the function.
Also update the usage of the function in drivers/netvsc
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_macaddr_get() return value from void to int
and return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_link_get() and rte_eth_link_get_nowait() return value
from void to int and return negative errno values in case of error
conditions.
Return value of link_update callback is ignored since the callback
returns not errors but whether link up status has changed or not.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_xstats_reset() return value from void to int and
return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since driver callbacks return status code now, there is no necessity
to enable or disable promiscuous mode once again if it is already
successfully enabled or disabled.
Configuration restore at startup tries to ensure that configured
promiscuous mode is applied and start will return error if it fails.
Also it avoids theoretical cases when already configured promiscuous
mode is applied once again and fails. In this cases it is unclear
which value should be reported on get (configured or opposite).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_dev_info_get() return value from void to int and return
negative errno values in case of error conditions.
Modify rte_eth_dev_info_get() usage across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_info_get() returns void and caller does know if the function
does its job or not. Changing of the return value to int would be
API/ABI breakage which requires deprecation process and cannot be
backported to stable branches. For now, make sure that device info is
initialized even in the case of invalid port ID.
Fixes: a30268e9a2d0 ("ethdev: reset whole dev info structure before filling")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Enable missing support for runtime configuration (setting/getting)
of QinQ strip rx offload for a given ethdev.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
We had some inconsistencies between functions prototypes and actual
definitions.
Let's avoid this by only adding the experimental tag to the prototypes.
Tests with gcc and clang show it is enough.
git grep -l __rte_experimental |grep \.c$ |while read file; do
sed -i -e '/^__rte_experimental$/d' $file;
sed -i -e 's/ *__rte_experimental//' $file;
sed -i -e 's/__rte_experimental *//' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
rte_eth_dev_info structure exposes, nb_seg_max & nb_mtu_seg_max
to provide maximum number of supported segments for a given platform.
Defining UINT16_MAX as default value of above mentioned variables to
expose support of infinite/maximum segments.
Based on above values, application can decide best size for buffers
while creating mbuf pool.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
We currently have no check on the mempool pointer passed to
rte_eth_rx_queue_setup.
Let's avoid a plain crash when dereferencing it.
Suggested-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add rte_eth_read_clock to read the raw clock of a device.
The main use is to get the device clock conversion co-efficients to be
able to translate the raw clock of the timestamp field of the pkt mbuf
to a local synced time value.
This function was missing to allow users to convert the Rx timestamp
field to real time without the complexity of the rte_timesync* facility.
One can derivate the clock frequency by calling twice read_clock and
then keep a common time base.
Signed-off-by: Tom Barbette <barbette@kth.se>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function rte_eth_dev_count_total() was introduced one year ago
in the release 18.05. It can be declared non experimental in 19.05.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Some port iterations are manually checking against RTE_ETH_DEV_UNUSED
instead of using the iterators based on rte_eth_find_next().
A new macro RTE_ETH_FOREACH_VALID_DEV() is introduced, but kept private
because there should be no need of iterating over all devices in the
API. The public iterators have additional filters for ownership, parent
device or sibling ports.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
If multiple ports share the same hardware device (rte_device),
they are siblings and can be found thanks to the new functions
and loop macros.
One iterator takes a port id as reference,
while the other one directly refers to the parent device.
The ownership is not checked because siblings may have
different owners.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
There are three states for an ethdev port.
Checking that the port is unused looks simpler than
checking it is neither attached nor removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This addresses the usability issue raised by OVS at DPDK Userspace
summit. It adds general min/max MTU into device info. For compatibility,
and to save space, it fits in a hole in existing structure.
The initial version sets max MTU to normal Ethernet, it is up to
PMD to set larger value if it supports Jumbo frames.
Also remove the deprecation notice introduced in 18.11 regarding this
change and bump ethdev ABI version.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Do not allow creating an Ethernet device with a name over the
allowed maximum (or zero length).
This is safer than silently truncating which is what happens now.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ali Alnubani <alialnu@mellanox.com>
Don't need to use snprintf for simple name copy.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
The set_port_owner was copying a string between structures of the
same type, therefore the name could never be truncated (unless source
string was not null terminated). Use strlcpy which does it better.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
When removing the old attach function, the racy variable for getting
the last port id became unused.
Fixes: c9cce42876f5 ("ethdev: remove deprecated attach/detach functions")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Currently this api doesn't report error if name is
truncated and so user is not sure about uniqueness
of name. This change reports error to help user.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
`local_conf` variable was needed for offload conversions but no more
required. No functional difference, only interim variable eliminated.
Fixes: ab3ce1e0c193 ("ethdev: remove old offload API")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The device information cannot be gotten correctly before
the configuration is set. Because on some NICs the
information has dependence on the configuration.
Fixes: 3be82f5cc5e3 ("ethdev: support PMD-tuned Tx/Rx parameters")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
