A rawdevice can have various attributes. This patch introduce support
for transparently setting attribute value or getting current attribute
state. This is done by allowing an opaque set of key and value to be
passed through rawdev library.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Each device in DPDK has a type associated with it - ethernet, crypto,
event etc. This patch introduces 'rawdevice' which is a generic
type of device, not currently handled out-of-the-box by DPDK.
A device which can be scanned on an installed bus (pci, fslmc, ...)
or instantiated through devargs, can be interfaced using
standardized APIs just like other standardized devices.
This library introduces an API set which can be plugged on the
northbound side to the application layer, and on the southbound side
to the driver layer.
The APIs of rawdev library exposes some generic operations which can
enable configuration and I/O with the raw devices. Using opaque
data (pointer) as API arguments, library allows a high flexibility
for application and driver implementation.
This patch introduces basic device operations like start, stop, reset,
queue and info support.
Subsequent patches would introduce other operations like buffer
enqueue/dequeue and firmware support.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch supports batch processing of multiple packets
in the Rx side
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In the I/O path we were calling rte_dpaa_portal_init which
internally checks if a portal is affined to the core.
But this lead to calling of that non-static API in every call.
Instead check the portal affinity in the caller itself for
performance reasons
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Use the optimized routine for phy to virt conversion,
when the mempool is allocated from physical contiguous memory.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
While scanning for devices, the order in which devices appear is
different as compared to MAC sequence.
This can cause confusion for users and automated scripts.
This patch create a sorted list of devices.
Fixes: 919eeaccb2 ("bus/dpaa: introduce NXP DPAA bus driver skeleton")
Cc: stable@dpdk.org
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A caller may/may not pass the flags in qman enqueue multi API.
This patch adds a check on that flag and only accesses it if passed
by the caller.
Fixes: 43797e7b47 ("bus/dpaa: support event dequeue and consumption")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
vceqzq_u32() is being used by mlx5 PMD but added since gcc 4.9.
Fixes: 570acdb1da ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch fixes compile failure with old kernels which have no
VIRTIO_F_ANY_LAYOUT defined.
Fixes: 5a8bb6e902 ("vhost: claim to support any layout feature")
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds software prefetching of the annotation which is
accessed by the driver to fetch the parsing results. The changes
also include as many instructions in between prefetching memory
and using it.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
The port dequeue depth value has to be compared against the maximum
allowed dequeue depth reported by the event drivers.
Fixes: 3617aae53f ("app/eventdev: add event Rx adapter setup")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit enables dynamic logging with the SW pmd.
The string "pmd.event.sw" is used to change the verbosity
of the logging output, as per the newly defined log naming.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Note that the "nicvf" term has been replaced with "thunderx",
as the naming scheme defines that a PMD name should be the
same as the directory that it lives in: drivers/net/thunderx
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Note that the "lio" term has been replaced with "liquidio",
as the naming scheme defines that a PMD name should be the
same as the directory that it lives in: drivers/net/liquidio
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Liang Ma <liang.j.ma@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit adds a section to the DPDK style guide to set
the dynamic logging formatting naming scheme.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes: 774e9ea919 ("net/dpaa2: add support for multi seg buffers")
Fixes: d2ef05d5c1 ("net/dpaa2: optimize Rx/Tx path")
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
If '--mbuf-pool-ops' is not passed to EAL as command line argument then
rte_eal_mbuf_default_mempool_ops will return NULL.
Instead check if internal_config.user_mbuf_pool_ops_name is NULL and
return compile time RTE_MBUF_DEFAULT_MEMPOOL_OPS.
Fixes: 8b0f7f4341 ("mbuf: maintain user and compile time mempool ops name")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Before this patch, the debug_autotest would call fork(),
call rte_panic() or rte_exit() in the child process, and
examine the return code to verify that rte_panic() and
rte_exit() were correctly reporting failures.
With the inclusion of the rte_eal_cleanup() patch, rte_exit()
was modified to cleanly tear-down EAL allocations. Currently
only one library (service cores) is allocated by EAL at startup
and should be cleaned up. This library has a check on a normal
(non-hugepage) variable to protect against double cleanup. The
service cores finalize() function itself frees back hugepage mem.
Given the fork() approach from the unit test, and the fact that
the double-free check is on an ordinary variable, causes multiple
child processed (fork()-ed from the unit-test runner) to attempt
to free the huge-page memory multiple times. The variable to
protect against double-cleanup was not effective, as the fork()
would restore it to show initialized in the next child.
The solution is to call rte_service_finalize() *before* calling
fork(), which results in the service cores double-cleanup variable
to be zero before the fork(), and hence the child processes never
free the hugepage service-cores memory (correct behavior, as the
unit-test suite is still running, and owns the hugepages).
Fixes: aec9c13c52 ("eal: add function to release internal resources")
Reported-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
The build system made a recursive call to "make" after
creating the build directory. This recursive call used
the hard-coded filename "Makefile", which prevented
builds from working if the file was renamed and make
called using "make -f". Taking the filename from
MAKEFILES_LIST make variable fixes this.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
Since meson 0.44, changing any file inside a PMD directory (quite
correctly) triggers a full re-run of meson on build, rather than an
incremental build as with earlier versions. This rerun is needed because
we use "grep" in meson to search for files on which to run pmdinfogen, and
changing any of those files means that grep and, therefore meson, needs to
be rerun. [Previous versions of meson did not track this dependency on the
grep command, and so did incremental builds only.]
If, however, we take advantage of pmdinfogen's ability to use stdin and
stdout instead of files, we can instead use a shell script to process an
entire static archive and generate a single .c file from it. This
eliminates the need for grep, and means that changes to a PMD file only
need an incremental build - a significant time saving.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
By making "compat" lib (which consists of a header only) a dependency of
the EAL, we make the header file available to all other libs, drivers and
apps, and thereby make it less work to do ABI versioning.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add various vendor specific cross build targets.
This can be verified by using linaro toolchain and running
meson build --cross-file config/arm/arm64_<cpu>_<platform>_<compiler>
In future more cross build targets can be added.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add files to enable compiling for ARM native/cross builds.
This can be tested by doing a cross-compile for armv8-a type using
the linaro gcc toolchain.
meson arm-build --cross-file aarch64_cross.txt
ninja -C arm-build
where aarch64_cross.txt contained the following
[binaries]
c = 'aarch64-linux-gnu-gcc'
cpp = 'aarch64-linux-gnu-cpp'
ar = 'aarch64-linux-gnu-ar'
[host_machine]
system = 'linux'
cpu_family = 'aarch64'
cpu = 'armv8-a'
endian = 'little'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds most of the remaining tests to the meson build.
They can be run using test binary as normal, or via "ninja test".
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
