This is to support cases when the input data for
decoding a code block is larger than 64kB and would
not fit as a contiguous block of data into one
mbuf. In that case the length from the operation
supersedes the mbuf default structure.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The actual LLR representation was incorrectly assumed to be 2
instead of 4. This would impact wireless performance but is not
critical to be back ported on LTS branches.
Fixes: c769c71175 ("baseband/turbo_sw: extend for 5G")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This exposes the HARQ buffer size at the device driver level
instead of using the capability of a specific operation.
This is currently not yet used by a device until
future commit.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Adding capability flag for device variants when HARQ buffer
may or may not include the filler bits.
Minor cosmetic changes in same file.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds crypto J0 test case to AES-GCM
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Segfault was observed when running ipsec unit test:
+ TestCase [10] : test_ipsec_replay_inb_repeat_null_null_wrapper
succeeded
+ TestCase [11] : test_ipsec_replay_inb_inside_burst_null_null_wrapper
succeeded
+ TestCase [12] : test_ipsec_crypto_inb_burst_2sa_null_null_wrapper
succeeded
+ TestCase [13] : test_ipsec_crypto_inb_burst_2sa_4grp_null_null_wrapper
succeeded
Segmentation fault
Data corruption happens due to incorrect destroy of session. Security
session needs process different from crypto session.
Destroy corresponding sessions according to different security actions.
Fixes: 05fe65eb66 ("test/ipsec: introduce functional test")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
To detect if sgl, use nb_segs > 1, instead of checking for next pointer,
as nb_segs is in first cache-line while next is in second cache-line.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Improve case where application set m_dst to same as m_src
so really an in-place operation, though would have been treated
as out-of-place. No functional change but this path can now benefit
from DMA alignment.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
This commit removes unused prototype of the function pointer
compressdev_queue_pair_count_t.
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
This commit removes unused function pointer (queue_pair_count)
from struct rte_cryptodev_ops. Related functions removed as well.
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
This patch fixes the marketing name of the QAT GEN3 to P5xxx.
Updates this name mentioned in the compression PMD as well as
in the documentation.
Fixes: aa983f03ad ("crypto/qat: handle Single Pass Crypto Requests on GEN3")
Fixes: a124830a6f ("compress/qat: enable dynamic huffman encoding")
Fixes: 1f5e4053f9 ("common/qat: support GEN3 devices")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds range-checking of the device id passed from
the user app code. It prevents out-of-range array accesses
which in some situations resulted in an
application crash (segfault).
Fixes: 3dd4435cf4 ("cryptodev: fix checks related to device id")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds test vectors for AES-256 and sets QAT as the
target PMD.
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds support for DOCSIS AES-256 when using qat
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Reserve minimum number of crypto queues equal to number of ports.
This is to fulfill inline protocol offload requirements.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Document addition of event mode support
to ipsec-secgw application.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Make number of buffers in a pool nb_mbuf_in_pool dependent on number
of ports, cores and crypto queues. Add command line option -s which
when used overrides dynamic calculation of number of buffers in a pool.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add driver inbound and outbound worker thread for ipsec-secgw. In driver
mode application does as little as possible. It simply forwards packets
back to port from which traffic was received instructing HW to apply
inline security processing using first outbound SA configured for
a given port. If a port does not have SA configured outbound traffic
on that port will be silently dropped. The aim of this mode is to
measure HW capabilities. Driver mode is selected with single-sa option.
The single-sa option accepts SA index however in event mode the SA
index is ignored.
Example command to run ipsec-secgw in driver mode:
ipsec-secgw -w 0002:02:00.0,ipsec_in_max_spi=128
-w 0002:03:00.0,ipsec_in_max_spi=128 -w 0002:0e:00.0 -w 0002:10:00.1
--log-level=8 -c 0x1 -- -P -p 0x3 -u 0x1 -f aes-gcm.cfg
--transfer-mode event --event-schedule-type parallel --single-sa 0
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add eventmode support to ipsec-secgw. With the aid of event helper
configure and use the eventmode capabilities.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add eventmode helper eh_conf_init and eh_conf_uninit
functions which purpose is to initialize and
uninitialize eventmode helper configuration.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for Rx and Tx internal ports. When internal ports are
available then a packet can be received from eth port and forwarded
to event queue by HW without any software intervention. The same
applies to Tx side where a packet sent to an event queue can by
forwarded by HW to eth port without any software intervention.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In eventmode workers can be drafted differently according to the
capabilities of the underlying event device. The added functions will
receive an array of such workers and probe the eventmode properties to
choose the worker.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add routines to display the eventmode configuration and provide
an overview of the devices used.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add Tx adapter support. The event helper init routine will initialize
the Tx adapter according to the configuration. If Tx adapter config
is not present it will generate a default config.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add Rx adapter support. The event helper init routine will initialize
the Rx adapter according to the configuration. If Rx adapter config
is not present it will generate a default config. If there are enough
event queues available it will map eth ports and event queues 1:1
(one eth port will be connected to one event queue). Otherwise it
will map all eth ports to one event queue.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add event device port-lcore link and specify which event queues should
be connected to the event port. Generate a default config for event
port-lcore links if it is not specified in the configuration. This
routine will check the number of available ports and then create links
according to the number of cores available. This patch also adds a new
entry in the eventmode conf to denote that all queues are to be linked
with every port. This enables one core to receive packets from all
ethernet ports.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add framework for eventmode helper. Event mode involves
initialization of multiple devices like eventdev, ethdev
and etc. Add routines to initialize and uninitialize event
device. Generate a default config for event device if it
is not specified in the configuration. Currently event
helper supports single event device only.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The default flow created would enable security processing on all ESP
packets. If the default flow is created, SA based rte_flow creation
would be skipped.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Change format for uint64_t to %"PRIu64" to make compiler happy.
Fixes: 103809d032 ("app/test-fib: add test application for FIB")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Compiler can throw warning message for routes and lookup files.
Fixes: 103809d032 ("app/test-fib: add test application for FIB")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
This patch allows C++ programs to use librte_fib library routines.
Previously C++ programs were not able to link this library and programs
would fail to get linked. With this patch compilation and linking
will be successful.
Fixes: 39e9272484 ("fib: add FIB library")
Fixes: 40d41a8a7b ("fib: support IPv6")
Cc: stable@dpdk.org
Signed-off-by: Asim Jamshed <asim.jamshed@gmail.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
libjansson4 is not enough to build telemetry. Replace it with
libjansson-dev.
Fixes: 99889bd852 ("ci: introduce Travis builds for GitHub repositories")
Cc: stable@dpdk.org
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Acked-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
None of the public functions modify IPv6 address passed. So their
parameters are made const - with the exception of bulk functions.
This exception is due to compatibility problems - some compilers report
problems with const-casting of array of arrays.
Previously only lookup and add were updated to have addresses passed as
const so I'm adding this fixline.
Fixes: d82927d2f8 ("lpm6: make IPv6 address immutable")
Cc: stable@dpdk.org
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Clean up indent and line ordering in Makefile and meson.build
for consistency in linux/ and freebsd/ directories.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Since the kernel modules are moved to kernel/ directory,
there is no need anymore for the sub-directory eal/ in
linux/, freebsd/ and windows/.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The EAL API (with doxygen documentation) is moved from
common/include/ to include/, which makes more clear that
it is the global API for all environments and architectures.
Note that the arch-specific and OS-specific include files are not
in this global include directory, but include/generic/ should
cover the doxygen documentation for them.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The variable common_sources allows to change the list of common files
from an arch-specific or OS-specific meson file.
For consistency and least surprise principle, this variable is removed.
Now the list of common sources is defined only in common/meson.build.
As a consequence, the temporary list of files which are currently supported
on Windows, is moved from windows/eal/meson.build.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The arch-specific directories arm, ppc and x86 in common/include/arch/
are moved as include/ sub-directories of respective arch directories:
- arm/include/
- ppc/include/
- x86/include/
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The arch-specific directories arm, ppc and x86 in common/arch/
are moved at the same level as the OS-specific directories.
It makes more clear that EAL is covering a matrix combining OS and arch.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The directories ppc_64 are renamed as ppc in
- config/
- lib/librte_eal/common/arch/
- lib/librte_eal/common/include/arch/
The EAL directories are not really renamed, but symbolically linked,
because they will be moved with their new name in the next commits.
If ppc_32 needs to be supported, it can be in the same directory.
The arch directories arm and x86 are already covering both 32 and 64-bit
sub-architectures.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When moving files to the directory kernel/,
the file BSDmakefile.meson was left in eal/.
Also the intermediate makefiles in linux/ and freebsd/ became useless.
Fixes: acaa9ee991 ("move kernel modules directories")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Introduction of pinned external buffers doubled memory loads in the
rte_pktmbuf_prefree_seg() function. Analysis of the generated assembly
code shows unnecessary load of the pool field of the rte_mbuf structure.
Here is the snippet of the assembly for "if (!RTE_MBUF_DIRECT(m))":
Before the change the code was:
movq 0x18(%rbx), %rax // load the ol_flags field
test %r13, %rax // check if ol_flags equals to 0x60...0
jz 0x9a8718 <Block 2> // jump out to "if (m->next != NULL)"
After the change the code became:
movq 0x18(%rbx), %rax // load ol_flags
test %r14, %rax // check if ol_flags equals to 0x60...0
jnz 0x9bea38 <Block 2> // jump in to "if (!RTE_MBUF_HAS_EXTBUF(m)"
movq 0x48(%rbx), %rax // load the pool field
jmp 0x9bea78 <Block 7> // jump out to "if (m->next != NULL)"
Look like this absolutely unneeded memory load of the pool field is an
optimization for the external buffer case in GCC (4.8.5), since Clang
generates the same assembly for both before and after the change versions.
Plus, GCC favors the external buffer case over the simple case.
This assembly code layout causes the performance degradation because the
rte_pktmbuf_prefree_seg() function is a part of a very hot path.
Workaround this compilation issue by moving the check for pinned buffer
apart from the check for external buffer and restore the initial code
flow that favors the direct mbuf case over the external one.
Fixes: 6ef1107ad4 ("mbuf: detach mbuf with pinned external buffer")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
As per the comments in this code section, since there is a matching device,
it is now its responsibility to manage the devargs we've just inserted.
But the matching device ptr's devargs is still uninitialized or not pointing
to the newest dev_args that were passed as a parameter to local_dev_probe().
This is needed particularly in the case when *probe is called again* on an
already probed device as part of adding a representor port to OVS-DPDK.
Fixes: 7e8b266501 ("eal: fix hotplug add / remove")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Gaetan Rivet <grive@u256.net>
When the input string is "key=[", the ending '\0' is replaced
by a ',', leading to a heap buffer overflow.
Check the content of ctx1 to avoid this problem.
Fixes: cc0579f233 ("kvargs: support list value")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The return was not properly placed, and only the first test case
was validated.
Fixes: e495f54355 ("kvargs: add test case in app/test")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
