This patch extends flow director to select more IP Header fields
as filter input set.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds a new function to set the fdir input set to default
when initialization.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
In this patch, flex payload is removed from valid fdir input set
values. This is because all flex payload configuration can be set
in struct rte_fdir_conf during device configure phase, which is
a more flexible way of setting this up.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
For the input set selection, Hash filter and Flow director shared
the same function, i.e. i40e_filter_inset_select.
For code readability, this patch replaces i40e_filter_inset_select
with two new functions: i40e_hash_filter_inset_select and
i40e_fdir_filter_inset_select for Hash filter and Flow director
respectively.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
When Linux PF and DPDK VF are used for i40e PMD, when a PF reset occurs,
an interrupt will go via adminq event to inform the VF of the reset.
A callback mechanism is introduced for the VF to allow it to invoke a
registered callback when PF reset happens.
Users can register a callback for this interrupt event using:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Currently, i40evf PMD uses a global static buffer to send virtchnl
commands to host driver. It is shared by multiple VFs.
This patch changed to allocate a virtchnl cmd buffer for each VF.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add a new API rte_eth_dev_get_supported_ptypes to query what packet types
can be filled by a given device. The device should be already started or
its PMD RX burst function already decided, since the packet types supported
may vary depending on RX function.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Comment for "ierrors" counter says that it counts erroneous received
packets. But for some reason "imissed" counter is added to "ierrors"
counter in most drivers.
It is a mistake, because missed packets are obviously not received.
This patch fixes it.
Fixes: 70bdb18657da ("ethdev: add Rx error counters for missed, badcrc and badlen packets")
Fixes: 6bfe648406b5 ("i40e: add Rx error statistics")
Fixes: 856505d303f4 ("cxgbe: add port statistics")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch implemented the ops of adding and removing mac
address in i40evf driver. Functions are assigned like:
.mac_addr_add = i40evf_add_mac_addr,
.mac_addr_remove = i40evf_del_mac_addr,
To support multiple mac addresses setting, this patch also
extended the mac addresses adding and deletion when device
start and stop. Each VF can have a maximum of 64 mac
addresses.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
VEB switching feature for i40e is used to enable the switching between the
VSIs connect to the virtual bridge. The old implementation is setting the
virtual bridge mode as VEPA which is port aggregation. Enable the switching
ability by setting the loop back mode for the specific VSIs which connect
to PF or VFs.
VEB/VSI/VEPA are concepts not specific to the i40e HW, the concepts are
from 802.1qbg spec
IEEE EVB tutorial:
http://www.ieee802.org/802_tutorials/2009-11/evb-tutorial-draft-20091116_v09.pdf
VEB: a virtual switch can forward the packet based on the specific match
field.
VSI: a virtual interface connect between the VEB/VEPA and virtual machine.
VEPA: a virtual Ethernet port aggregator will upstream the packets from
VSI to the LAN port.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch fixes a typo in a comment in the definition of
the i40e_pf struct.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Previously, DCB(Data Center Bridging) is only enabled on PF,
queue mapping and BW configuration is only done on PF.
This patch enables DCB for VMDQ VSIs(Virtual Station Interfaces)
by following steps:
1. Take BW and ETS(Enhanced Transmission Selection)
configuration on VEB(Virtual Ethernet Bridge).
2. Take BW and ETS configuration on VMDQ VSIs.
3. Update TC(Traffic Class) and queues mapping on VMDQ VSIs.
To enable DCB on VMDQ, the number of TCs should not be larger than
the number of queues in VMDQ pools, and the number of queues per
VMDQ pool is specified by CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM
in config/common_* file.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
It removes the i40evf_set_mac_type() defined in PMD, and reuses
i40e_set_mac_type() defined in base driver.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
It adds base driver release information such as release date,
for better tracking in the future.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Several structures and macros are added or updated, such
as 'struct i40e_aqc_get_link_status',
'struct i40e_aqc_run_phy_activity' and
'struct i40e_aqc_lldp_set_local_mib_resp'.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
It adds the new AQ command and struct for managing a
thermal sensor.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
X722 supports Expanded version of TCP, UDP PCTYPES for RSS.
Add a Virtchnl offload to support this.
Without this patch VF drivers will not be able to support
the correct PCTYPES for X722 and UDP flows will not fan out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds 7 new register definitions for programming the
parser, flow director and RSS blocks in the HW.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
RX control register read/write functions are added, as directly
read/write may fail when under stress small traffic. After the
adminq is ready, all rx control registers should be read/written
by dedicated functions.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
When updating a VSI, save off the number of allocated and
unallocated VSIs as we do when adding a VSI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Fix the driver load failure with linking with some
PHY types, as the amount of time it takes for the
GLGEN_RSTAT_DEVSTATE to be set increases greatly on those PHY
types, which can lead to a timeout.
Fixes: 9aeefed05538 ("i40e/base: support ESS")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
In Multi-Function Mode (MFP) particularly when the PF VSI is set
in limited promiscuous mode, the HW switch was still mirroring the
outgoing packets from other VSIs (VF/VMdq) onto the PF VSI.
This sets a new bit to avoid above mirroring, and it is in limited
promiscuous on the PF VSI in MFP which is similar to default port
VSI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds functions to blink led on devices using a new
PHY since MAC registers used in other designs do not work in
this device configuration.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add the support code for calling the AdminQ API call
aq_set_switch_config.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
With the latest firmware, statistics gathering can now be enabled and
disabled in the HW switch, so we need to add a parameter to allow the
driver to set it as desired. At the same time, the L2 cloud filtering
parameter has been removed as it was never used.
Older drivers working with the newer firmware and newer drivers working
with older firmware will not run into problems with these bits as the
defaults are reasonable and there is no overlap in the bit definitions.
Also, newer drivers will be forced to update because of the change in
function call parameters, a reminder that the functionality exists.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch implements necessary functions related to port
mirroring features such as add/delete mirror rule, function
to set promiscuous VLAN mode for VSI if mirror rule_type is
"VLAN Mirroring".
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add the use of the new shared MAC filter bit for multicast
and broadcast filters in order to make better use of the
filters available from the device.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch fixes a problem where the NVMUpdate Tool, when
using the PHY NVM feature, gets bad data from the PHY because
of contention on the MDIO interface from get phy capability
calls from the driver during regular operations. The problem
is fixed by adding a check if media is available before calling
get phy capability function because that bit is not set when
device is in PHY interaction mode.
Fixes: 842ea1996335 ("i40e/base: save link module type")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The device capabilities were defined in two places, and neither had
all the definitions. It really belongs with the AQ API definition,
so this patch removes the other set of definitions and fills out the
missing item.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The recently added proxy opcodes should be available only with
X722_SUPPORT, so move them into the #ifdef, and reorder these
to be in numerical order with the rest of the opcodes. Several
structs that were added are unnecessary, so they are removed
here.
Fixes: 788fc17b2dec ("i40e/base: support proxy config for X722")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The recently added Wakeup On Line (WOL) opcodes should be
available only with X722_SUPPORT, so move them into the #ifdef,
and reorder these to be in numerical order with the rest of the
opcodes. Several structs that were added are unnecessary, so
they are removed here.
Fixes: 3c89193a36fd ("i40e/base: support WOL config for X722")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add new Device ID's for backplane and QSFP+ adapters, and delete
deprecated one for backplane.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
In one obscure corner case, it was possible to clear the NVM update
wait flag when no update_done message was actually received. This
patch cleans the event descriptor before use, and moves the opcode
check to where it won't get done if there was no event to clean.
Fixes: 8db9e2a1b232 ("i40e: base driver")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The standard way to check if the AQ is enabled is to look at
the count field. So it should only set this field after it has
successfully allocated memory.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
It's possible that while waiting for the spinlock, another
entity (that owns the spinlock) has shut down the admin queue.
If it then attempts to use the queue, it will panic.
It adds a check for this condition on the receive side. This
matches an existing check on the send queue side.
Fixes: 8db9e2a1b232 ("i40e: base driver")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
XL710/X710 devices requires FW version checks to properly handle
DCB configurations from the FW while other devices (e.g. X722)
do not, so limit these checks to XL710/X710 only.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
In X722, NVM reads can't be done through SRCTL registers.
And require AQ calls, which require grabbing the NVM lock.
Unfortunately some paths need the lock to be acquired once
and do a whole bunch of stuff and then release it.
This patch creates an unsafe version of the read calls, so
that it can be called from the paths that need the bulk access.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Instead of doing the MAC check, use a flag that gets set per
MAC. This way there are less chances of user error and it
can enable multiple MACs with the capability in a single place
rather than cluttering the code with MAC checks.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
SW needs to acquire the NVM ownership before issuing an AQ read
to the X722 NVM otherwise it will get EBUSY from the firmware.
Also it should be released when done.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Fix compilation warnings in base code on some platforms.
Fixes: bd6651c2d2d7 ("i40e/base: use bit shift macros")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Use ether API of 'is_valid_assigned_ether_addr' to validate
MAC address.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
Generate a MAC address for each VF during PF host
initialization.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
VLAN filtering was always performed, even if hw_vlan_filter was
disabled. During device initialization, default filter
RTE_MACVLAN_PERFECT_MATCH was applied. In this situation, all incoming
VLAN frames were dropped by the card (increase of the register RUPP - Rx
Unsupported Protocol).
In order to restore default behavior, if HW VLAN filtering is activated,
set a filter to match MAC and VLAN. If not, set a filter to only match
MAC.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Fixes: 912b595146d6 ("i40e: mac vlan filter")
Signed-off-by: Julien Meunier <julien.meunier@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The no-refcount path was being taken without the application opting
in to it.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Reported-by: Mike Stolarchuk <mike.stolarchuk@bigswitch.com>
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Change the fields of outer_mac and inner_mac in struct
rte_eth_tunnel_filter_conf from pointer to struct in order to
keep the code's readability.
Signed-off-by: Xutao Sun <xutao.sun@intel.com>
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The names of function for tunnel port configuration are not
accurate. They're tunnel_add/del, better change them to
tunnel_port_add/del.
The old functions are directly replaced because the API and ABI
compatibility of ethdev are already broken in 16.04.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
