This commit adds GCM tests to use within scatter-gather list.
Test use direct chained mbufs created based on the input parameter
for max size for in place operations and out of place operations.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This commit adds tests of Data Encryption Standard (DES)
algorithm to Intel QuickAssist technology crypto test suites
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Extended functional AES-CBC and AES-CTR cipher-only
tests to run on QAT PMD.
Added AES_CBC cipher-only performance tests on QAT PMD.
No driver changes, but as now tested, QAT documentation
is updated to remove constraint.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
modify set_vf_rx_vlan function to handle the i40e PMD.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
command is: set vf vlan tag port_id vf_id on|off
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add command to call rte_pmd_i40e_set_vf_broadcast.
Add set vf broadcast in testpmd_funcs.rst file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF multicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF unicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
The new VF Daemon (VFD) APIs is implemented on i40e. Change
testpmd code to use them, including VF MAC anti-spoofing,
VF VLAN anti-spoofing, TX loopback, VF VLAN strip, VF VLAN
insert.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Parameter checking is done in the rte_pmd_ixgbe_* functions.
Remove parameter checking from before calls to the rte_pmd_ixgbe_*
functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Use the the following ixgbe public functions:
rte_pmd_ixgbe_set_vf_rate_limit
rte_pmd_ixgbe_set_vf_rx
rte_pmd_ixgbe_set_vf_rxmode
rte_pmd_ixgbe_set_vf_tx
rte_pmd_ixgbe_set_vf_vlan_filter
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Some CLIs don't check the input port ID, it
may cause segmentation fault (core dumped).
Fixes: 425781ff5a ("app/testpmd: add ixgbe VF management")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds function rte_pktmbuf_linearize to let crypto PMD coalesce
chained mbuf before crypto operation and extend their capabilities to
support segmented mbufs when device cannot handle them natively.
Included unit tests for rte_pktmbuf_linearize functionality:
1) Creates banch of segmented mbufs with different size and number of
segments.
2) Fills noncontigouos mbuf with sequential values.
3) Uses rte_pktmbuf_linearize to coalesce segmented buffer into one
contiguous.
4) Verifies data in linearized buffer.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Below MACsec offload commands are added:
- set macsec offload <port_id> on encrypt on|off replay-protect on|off
- set macsec offload <port_id> off
- set macsec sc tx|rx <port_id> <mac> <pi>
- set macsec sa tx|rx <port_id> <idx> <an> <pn> <key>
Also update the testpmd user guide.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
By introducing explicit -lrte_pmd_ixgbe link request in
testpmd Makefile,"-Wl,-lrte_pmd_ixgbe" provided twice, and linker
removes the duplication by keeping only first occurrence.
This moves "-Wl,-lrte_pmd_ixgbe" out of "-Wl,--whole-archive" flag
and makes symbol generation totally different than previous version
in case of static build.
This patch fixes the static build linking order by introducing
-lrte_pmd_ixgbe under the shared library config
(CONFIG_RTE_BUILD_SHARED_LIB).
Fixes: 425781ff5a ("app/testpmd: add ixgbe VF management")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Contrary to the current description, mbuf RSS hash result storage does not
overlap with the returned MARK value (hash.fdir.lo vs. hash.fdir.hi), and
both may be combined.
Reflect this change by allowing testpmd to display both values
simultaneously.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit addresses several obvious issues reported by Coverity
with array bounds checks in functions related to the flow API.
Coverity issue: 139596, 139597, 139598, 139599
Fixes: 938a184a18 ("app/testpmd: implement basic support for flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Make all the DPDK Python apps work with Python 2 or 3 to
allow them to work with whatever is the system default.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Make all DPDK python application compliant with the PEP8 standard
to allow for consistency checking of patches and to allow further
refactoring.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Since all current drivers supports Tx preparation API, it is used
in csum forwarding engine by default for all drivers.
Adding additional step to the csum engine costs about 3-4% of performance
drop, on my setup with ixgbe driver. It's caused mostly by the need
of reaccessing and modification of packet data.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Since rte_eth_dev_info_get does memset() on dev_info before
calling device specific code, the explicit assignment of NULL
in all these virtual drivers has no effect.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
A missing include causes the following compilation errors:
error: use of undeclared identifier 'AF_INET'
error: use of undeclared identifier 'AF_INET6'
Fixes: ef6e38550f ("app/testpmd: add items ipv4/ipv6 to flow command")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit exposes the following item fields through the flow command:
- VLAN priority code point, drop eligible indicator and VLAN identifier
(all part of TCI).
- IPv4 type of service, time to live and protocol.
- IPv6 traffic class, flow label, next header and hop limit.
- SCTP tag and checksum.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
- QUEUE: assign packets to a given queue index.
- DUP: duplicate packets to a given queue index.
- RSS: spread packets among several queues.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
- MARK: attach 32 bit value to packets.
- FLAG: flag packets.
- DROP: drop packets.
- COUNT: enable counters for a rule.
- PF: redirect packets to physical device function.
- VF: redirect packets to virtual device function.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add the ability to match a few properties of common L4[.5] protocol
headers:
- ICMP: type and code.
- UDP: source and destination ports.
- TCP: source and destination ports.
- SCTP: source and destination ports.
- VXLAN: network identifier.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add the ability to match basic fields from IPv4 and IPv6 headers (source
and destination addresses only).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
These pattern items match basic Ethernet headers (source, destination and
type) and related 802.1Q/ad VLAN headers.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Matches arbitrary byte strings with properties:
- relative: look for pattern after the previous item.
- search: search pattern from offset (see also limit).
- offset: absolute or relative offset for pattern.
- limit: search area limit for start of pattern.
- length: pattern length.
- pattern: byte string to look for.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
- PF: match packets addressed to the physical function.
- VF: match packets addressed to a virtual function ID.
- PORT: device-specific physical port index to use.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
This pattern item matches any protocol in place of the current layer and
has two properties:
- min: minimum number of layers covered (0 or more).
- max: maximum number of layers covered (0 means infinity).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Several rte_flow structures expose bit-fields that cannot be set in a
generic fashion at byte level. Add bit-mask support to handle them.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Generating bit-masks from prefix lengths is often more convenient than
providing them entirely (e.g. to define IPv4 and IPv6 subnets).
This commit adds the "prefix" operator that assigns generated bit-masks to
any pattern item specification field.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add parser code to fully set individual fields of pattern item
specification structures, using the following operators:
- fix: sets field and applies full bit-mask for perfect matching.
- spec: sets field without modifying its bit-mask.
- last: sets upper value of the spec => last range.
- mask: sets bit-mask affecting both spec and last from arbitrary value.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow query {port_id} {rule_id} {action}
Query a specific action of an existing flow rule.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow (validate|create) {port_id}
[group {group_id}] [priority {level}] [ingress] [egress]
pattern {item} [/ {item} [...]] / end
actions {action} [/ {action} [...]] / end
Either check the validity of a flow rule or create it. Any number of
pattern items and actions can be provided in any order. Completion is
available for convenience.
This commit only adds support for the most basic item and action types,
namely:
- END: terminates pattern items and actions lists.
- VOID: item/action filler, no operation.
- INVERT: inverted pattern matching, process packets that do not match.
- PASSTHRU: action that leaves packets up for additional processing by
subsequent flow rules.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow destroy {port_id} rule {rule_id} [...]
Destroy a given set of flow rules associated with a port.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow flush {port_id}
Destroy all flow rules on a port.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow list {port_id} [group {group_id}] [...]
List configured flow rules on a port. Output can optionally be limited to a
given set of group identifiers.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Parse all integer types and handle conversion to network byte order in a
single function.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Managing generic flow API functions from command line requires the use of
dynamic tokens for convenience as flow rules are not fixed and cannot be
defined statically.
This commit adds specific flexible parser code and object for a new "flow"
command in separate file.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add basic management functions for the generic flow API (validate, create,
destroy, flush, query and list). Flow rule objects and properties are
arranged in lists associated with each port.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
This moves the non-PCI related initialization of the link state interrupt
callback list and the setting of the default MTU to rte_eth_dev_allocate()
so that drivers only need to set non-default values.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This makes it easier to check which driver name is reported through ethdev
rte_eth_dev_info_get().
Example:
./build/app/testpmd -c 0x6 --vdev net_af_packet0,iface=mgmt0 --
-i --total-num-mbufs 2049
[snip]
testpmd> show port info all
********************* Infos for port 0 *********************
MAC address: DE:AD:DE:01:02:03
Driver name: net_af_packet
Connect to socket: 0
memory allocation on the socket: 0
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Formatted as:
cmd fixed_string fixed|string|options <variable>: Description
If there is no description, final colon emitted.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The test recently added accesses to lpm->tbl8[ip >> 8] with is much
larger than the size of the table, causing a crash of the test
application.
Fix this typo by replacing tbl8 by tbl24.
Fixes: 231fa88ed5 ("app/test: verify LPM tbl8 recycle")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Data Centre Bridge (DCB) configuration fails when SRIOV is
enabled if nb_rxq or nb_txq are greater than nb_q_per_pool.
The failure occurs during configuration of the ixgbe PMD when
it is started, in the ixgbe_check_mq_mode function.
Fixes: 2a977b891f ("app/testpmd: fix DCB configuration")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This commit fixes problem with device hanging because of
wrong pointer values in snow3g performance test
Fixes: 97fe6461c7 ("app/test: add SNOW 3G performance test")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
num_route_entries needs to be resetted.
Fixes: 17d60f5b5e ("app/test: remove large IPv4 LPM data file")
Signed-off-by: Nikita Kozlov <nikita@elyzion.net>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
offsets for digest and data need to be adjusted
to take prepended IV into account
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch replaces name "libcrypto" to "openssl" from file directories,
symbol prefixes and sub-names connected with old name.
Renamed poll mode driver files, test files, and documentations.
It is done to better name association with library because
the cryptography operations are using Openssl library crypto API.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This commit adds continual performace tests to Intel(R) QuickAssist
Technology tests suite. Performance tests are run continually with
some number of repeating loops.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This commit adds tests with corrupted data to the Intel QuickAssist
Technology tests suite in test_cryptodev.c
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
The final parameter to rte_pmd_ixgbe_set_vf_vlan_insert is uint8_t
and treated as a binary flag when it needs to be a uint16_t
and treated as a VLAN id. The data sheet (sect 8.2.3.27.13) describes
the right most 16 bits as the VLAN id that is to be inserted; the
16.11 code is accepting only a 1 or 0 thus effectively only
allowing the VLAN id 1 to be inserted (0 disables the insertion
setting).
This patch changes the final parm name to represent the data that
is being accepted (vlan_id), changes the type to permit all valid
VLAN ids, and validates the parameter based on the range of 0 to
4095. Corresponding changes to prototype and documentation in the
.h file.
Fixes: 49e248223e ("net/ixgbe: add API for VF management")
Signed-off-by: E. Scott Daniels <daniels@research.att.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vlan mask and tunnel id mask of flow director are defined as big
endian. So they should be converted.
When the mask is printed, the parameters are not converted either.
This patch converts the mask parameters.
Fixes: 7c554b4f04 ("app/testpmd: update display of flow director information")
Fixes: 53b2bb9b7e ("app/testpmd: new flow director commands")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In mac-vlan mode, MAC address mask is not supported by HW.
The MAC address mask should not be set in mac-vlan mode.
Remove this parameter from the CLI. Remove MAC address
from mask print too.
Fixes: 53b2bb9b7e ("app/testpmd: new flow director commands")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Parameters pf & vf are added into most of flow director
filter CLIs.
But mac-vlan and tunnel filters don't have these parameters,
the parameters should not be checked for mac-vlan and tunnel
filters.
Fixes: e6a68c0133 ("app/testpmd: extend commands for flow director in VF")
Reported-by: Frederico Cadete <frederico.cadete-ext@oneaccess-net.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For physical crypto devices, IV and digest are processed by the crypto
device which needs the contents to be written on some DMA able address.
So in order to do that, IV and digest are accomodated in the packet.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The created pool for crypto mbufs may be too big in some
environments.
To avoid this issue, mbuf pool is reverted to its previous size.
Moreover, here is added additional small pool with one large mbuf,
that is needed in large data test scenarios.
Fixes: ffbe3be0d4 ("app/test: add libcrypto")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
This patch reduce the number of total operations from 1M to 10K,
because test is taking too long time now.
Fixes: ffbe3be0d4 ("app/test: add libcrypto")
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
add cb_arg parameter to the _rte_eth_dev_callback_process function.
Adding a parameter to this function allows passing information
to the application when an eth device event occurs such as
a VF to PF message.
This allows the application to decide if a particular function
is permitted.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Alex Zelezniak <alexz@att.com>
add test for set vf vlan anti spoof
add test for set vf mac anti spoof
add test for set vf vlan stripq
add test for set vf vlan insert
add test for set tx loopback
add test for set all queues drop enable bit
add test for set vf split drop enable bit
add test for set vf mac address
add new APIs to testpmd help command.
add new APIs to the testpmd guide
Modify Makefile, add library rte_pmd_ixgbe to _LDLIBS-y.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
As a bug-fix for lpm tbl8 recycle is introduced,
add a test case to verify tbl8 group is correctly
freed when it only includes a rule with depth=24.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In csumonly engine, display the value of LRO segment if the
LRO flag is set.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Following discussions in [1] and [2], introduce a new bit to
describe the Rx checksum status in mbuf.
Before this patch, only one flag was available:
PKT_RX_L4_CKSUM_BAD: L4 cksum of RX pkt. is not OK.
And same for L3:
PKT_RX_IP_CKSUM_BAD: IP cksum of RX pkt. is not OK.
This had 2 issues:
- it was not possible to differentiate "checksum good" from
"checksum unknown".
- it was not possible for a virtual driver to say "the checksum
in packet may be wrong, but data integrity is valid".
This patch tries to solve this issue by having 4 states (2 bits)
for the IP and L4 Rx checksums. New values are:
- PKT_RX_L4_CKSUM_UNKNOWN: no information about the RX L4 checksum
-> the application should verify the checksum by sw
- PKT_RX_L4_CKSUM_BAD: the L4 checksum in the packet is wrong
-> the application can drop the packet without additional check
- PKT_RX_L4_CKSUM_GOOD: the L4 checksum in the packet is valid
-> the application can accept the packet without verifying the
checksum by sw
- PKT_RX_L4_CKSUM_NONE: the L4 checksum is not correct in the packet
data, but the integrity of the L4 data is verified.
-> the application can process the packet but must not verify the
checksum by sw. It has to take care to recalculate the cksum
if the packet is transmitted (either by sw or using tx offload)
And same for L3 (replace L4 by IP in description above).
This commit tries to be compatible with existing applications that
only check the existing flag (CKSUM_BAD).
[1] http://dpdk.org/ml/archives/dev/2016-May/039920.html
[2] http://dpdk.org/ml/archives/dev/2016-June/040007.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Support to configure 25G and 50G speeds is missing from testpmd.
This patch also updates the testpmd user guide accordingly.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
"flowgen" forwarding mode has fixed packet size (300).
Let it re-use --txpkts option for specifying generated packet size.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
An issue is found that DCB cannot be configured on ixgbe
NICs. It's said the TX queue number is not right.
On ixgbe the max TX queue number is not fixed, it depends
on the multi-queue mode.
This patch adds the device configuration before getting
info in the DCB configuration process. So the right info
can be got depending on the configuration.
Fixes: 1a572499 ("app/testpmd: setup DCB forwarding based on traffic class")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
RSS hash-key-size is retrieved from device configuration instead of
using a fixed size of 40 bytes.
Fixes: f79959ea15 ("app/testpmd: allow to configure RSS hash key")
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The commit that disabled TSO for small packets was broken during the
rebase. The problem is the IP checksum is not calculated in software if:
- TX IP checksum is disabled
- TSO is enabled
- the current packet is smaller than tso segment size
When checking if the PKT_TX_IP_CKSUM flag should be set (in case
of tso), use the local tso_segsz variable, which is set to 0 when the
packet is too small to require tso. Therefore the IP checksum will be
correctly calculated in software.
Moreover, we should not use tunnel segment size for non-tunnel tso, else
TSO will stay disabled for all packets.
Fixes: 97c21329d4 ("app/testpmd: do not use TSO for small packets")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The vdev eth_bond has been renamed to net_bond.
testpmd is creating a bonding device with the old prefix.
It is changed for consistency.
The script test-null.sh was failing because using the old name
for the null vdev.
Fixes also the bonding and testpmd doc.
Fixes: 2f45703c17 ("drivers: make driver names consistent")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The vdev eth_ring has been renamed to net_ring.
Some unit tests are using the old name and fail.
Fixes also the vdev comments in EAL and ethdev.
Fixes: 2f45703c17 ("drivers: make driver names consistent")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The mempool function rte_mempool_walk was not tested.
It will print the name of all mempools.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
copy app/test/test_lpm6_routes.h to app/test/test_lpm6_data.h .
and then delete app/test/test_lpm6_routes.h and clear the
large_ips_table[ ] to make LPM6 test case size much smaller than
before. Also add codes in app/test/test_lpm6_data.h to generate test
data in large_ips_table[ ] at run time.
Signed-off-by: Wei Dai <wei.dai@intel.com>
remove the large file app/test/test_lpm_routes.h and add codes to
auto-generate similar large route rule table which keeps same depth
and IP class distribution as previous one in test_lpm_routes.h .
With the rule table auto-generated at run time, the performance
of looking up keep similar to that from pervious constant table.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Hash multiwriter test consists of two subtests.
If the any of the subtests fails, the overall test should fail,
but the overall test only passed if the second subtest passed,
because the return of the first subtest was being overwritten.
Fixes: be856325cb ("hash: add scalable multi-writer insertion with Intel TSX")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch includes cuckoo hash table for testing all the APIs
The cuckoo hash is added for both test_table_tables and
test_table_combined cases.
The testing is completed and the results are OK.
Signed-off-by: Sankar Chokkalingam <sankarx.chokkalingam@intel.com>
Signed-off-by: Guruprasad Rao <guruprasadx.rao@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch inclides cuckoo hash table into test-pipeline
This allows to benchmark the performance of the cuckoo hash table
The following key sizes are supported for cuckoo hash table
8, 16, 32, 48, 64, 80, 96, 112 and 128.
The test-pipeline can be run using the following command
say for key size 8
./app/testpipeline -c 0xe -n 4 -- -p 0xf --hash-cuckoo-8
Signed-off-by: Sankar Chokkalingam <sankarx.chokkalingam@intel.com>
Signed-off-by: Guruprasad Rao <guruprasadx.rao@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Some of the failures cases inside the nic_xstats_display()
function doesn't free the allocated memory for the xstats and
their names, memory is freed now.
Fixes: e2aae1c1 ("ethdev: remove name from extended statistic fetch")
Fixes: 22561383 ("app: replace dump_cfg by proc_info")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
When TSO is not asked, hide the segment size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Asking for TSO (TCP Segmentation Offload) on packets that are already
smaller than (headers + MSS) does not work, for instance on ixgbe.
Fix the csumonly engine to only set the TSO flag when a segmentation
offload is really required, i.e. when packet is large enough.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This information is useful when debugging, especially with
bidirectional traffic.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The csum forward engine was updated to change the IP addresses in the
packet data in
commit 51f694dd40 ("app/testpmd: rework checksum forward engine")
This was done to ensure that the checksum is correctly reprocessed when
using hardware checksum offload. But the functions
process_inner_cksums() and process_outer_cksums() already reset the
checksum field to 0, so this is not necessary.
Moreover, this makes the engine more complex than needed, and prevents
to easily use it to forward traffic (like iperf) as it modifies the
packets.
This patch drops this behavior.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Introduce a new argument '--enable-lro' to ask testpmd to enable the LRO
feature on enabled ports, like it's done for '--enable-rx-cksum' for
instance.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Use the functions introduced in the previous commit to dump the offload
flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In addition to the packet type returned by the PMD, also display the
packet type calculated by parsing the packet in software. This is
particularly useful to compare the 2 values.
Note: it does not mean that both hw and sw always have to provide the
same value, since it depends on what hardware supports.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add a new command "tunnel_tso set <tso_segsz> <port>" to enable
segmentation offload and set MSS to tso_segsz. Another command,
"tunnel_tso show <port>" is added to show tunneled packet MSS.
Result 0 means tunnel_tso is disabled.
The original commands, "tso set <tso_segsz> <port>" and "tso show
<port>" are only reponsible for non-tunneled packets. And the new
commands are for tunneled packets.
Below conditions are needed to make it work:
a. tunnel TSO is supported by the NIC;
b. "csum parse_tunnel" must be set so that tunneled pkts are
recognized;
c. for tunneled pkts with outer L3 is IPv4, "csum set outer-ip"
must be set to hw, because after tso, total_len of outer IP
header is changed, and the checksum of outer IP header calculated
by sw should be wrong; that is not necessary for IPv6 tunneled
pkts because there's no checksum field to be filled anymore.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
ts_params->conf.nb_queue_pairs should not be hard coded with device
specific number. It should be retrieved from the device info.
Any test which changes it should restore it to orig value.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Removed obsolete comments re inability to free and re-allocate
queue memory and obsolete workaround for it
which used to create maximum size queues first, then later
create smaller queues.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
This patch contains unit tests for libcrypto PMD. User can
use app/test application to check how to use this pmd and to
verify crypto processing.
Test name is cryptodev_libcrypto_autotest.
For performance test cryptodev_libcrypto_perftest can be used.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch rework AES tests .
In general - rename AES-named functions to blockcipher functions pattern.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Before adding the new ZUC tests, since they will use
the existing common functions for SNOW3G and KASUMI,
these functions are renamed to *_wireless_algo_*,
instead of *_snow3g_kasumi_*, as they are common
functions for all the three wireless algorithms.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Improve error message if crypto PMD build is not enabled in config file
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds AES Galois Counter Mode performance test case
for cryptodev QAT and AESNI GCM. Test is performed with different
buffer sizes, burst size of 32 and 128b key. Test vectors
are placed in app/test/test_cryptodev_perf_vectors.h file.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
