rte_flow update, following RFC [1], added to ethdev the rte_flow item
ipv6_frag_ext.
This patch updates testpmd CLI to support the new item and its fields.
To match on fragmented IPv6 packets, this item is added to pattern:
... ipv6 / ipv6_frag_ext ...
[1] http://mails.dpdk.org/archives/dev/2020-March/160255.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
rte_flow update, following RFC [1], introduced has_frag_ext field for
IPv6 header item, used to indicate match on fragmented/non-fragmented
packets.
This patch updates testpmd CLI to support the new field.
To match on non-fragmented IPv6 packets, need to use pattern:
... ipv6 has_frag_ext spec 0 has_frag_ext mask 1 ...
To match on fragmented IPv6 packets, need to use pattern:
... ipv6 has_frag_ext spec 1 has_frag_ext mask 1 ...
To match on any IPv6 packets, the has_frag_ext field should
not be specified for match.
[1] https://mails.dpdk.org/archives/dev/2020-August/177257.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch updates testpmd CLI to support fragment_offset field of
IPv4 header item.
To match on non-fragmented IPv4 packets, need to use pattern:
... ipv4 fragment_offset spec 0 fragment_offset mask 0x3fff ...
To match on fragmented IPv4 packets, need to use pattern:
... ipv4 fragment_offset spec 1 fragment_offset last 0x3fff
fragment_offset mask 0x3fff ...
(Use the full available range 1 to 0x3fff to include all possible
values.)
To match on any IPv4 packets, fragmented and non-fragmented,
the fragment_offset field should not be specified for match.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds shared action support to testpmd CLI.
All shared actions created via testpmd CLI assigned ID for further
reference in other CLI commands. Shared action ID supplied as CLI
argument or assigned by testpmd is similar to flow ID & limited to
scope of testpdm CLI.
Create shared action syntax:
flow shared_action {port_id} create [action_id {shared_action_id}]
[ingress] [egress] action {action} / end
Create shared action examples:
flow shared_action 0 create action_id 100 \
ingress action rss queues 1 2 end / end
This creates shared rss action with id 100 on port 0.
flow shared_action 0 create action_id \
ingress action rss queues 0 1 end / end
This creates shared rss action with id assigned by testpmd
on port 0.
Update shared action syntax:
flow shared_action {port_id} update {shared_action_id}
action {action} / end
Update shared action example:
flow shared_action 0 update 100 \
action rss queues 0 3 end / end
This updates shared rss action having id 100 on port 0
with rss to queues 0 3 (in create example rss queues were
1 & 2).
Destroy shared action syntax:
flow shared_action {port_id} destroy action_id {shared_action_id} [...]
Destroy shared action example:
flow shared_action 0 destroy action_id 100 action_id 101
This destroys shared actions having id 100 & 101
Query shared action syntax:
flow shared_action {port} query {shared_action_id}
Query shared action example:
flow shared_action 0 query 100
This queries shared actions having id 100
Use shared action as flow action syntax:
flow create {port_id} ... / end actions [action / [...]]
shared {action_id} / [action / [...]] end
Use shared action as flow action example:
flow create 0 ingress pattern ... / end \
actions shared 100 / end
This creates flow rule where rss action is shared rss action
having id 100.
All shared action CLIs report status of the command.
Shared action query CLI output depends on action type.
Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add a function to calculate the length of an IPv4 header as suggested
on the mailing list [1]. Call where appropriate.
[1] https://mails.dpdk.org/archives/dev/2020-October/184471.html
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Michael Pfeiffer <michael.pfeiffer@tu-ilmenau.de>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Following ethdev update in the previous patch of this series, this
patch adds CLI support to query information related to AGE action.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Use sample action with ratio is 1 for mirroring flow, add
supports to set the different port or encap action for mirrored
packets.
The example of test-pmd command:
1. set sample_actions 1 port_id id 1 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 1 / port_id id 2...
The flow will result in all the matched ingress packets will be sent to
port 2, and also mirrored the packets and sent to port 1.
2. set raw_encap 0 eth src.../ ipv4.../...
set raw_encap 1 eth src.../ ipv4.../...
set sample_actions 2 raw_encap index 0 / port_id id 0 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 2 / raw_encap index 1 / port_id id 0...
The flow will result in all the matched egress packets will be
encapsulated and sent to wire, and also mirrored the packets and with
the different encapsulated data and sent to wire.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add a new testpmd command 'set sample_actions' that supports the
multiple sample actions list configuration by using the index:
set sample_actions <index> <actions list>
The examples for the sample flow use case and result as below:
1. set sample_actions 0 mark id 0x8 / queue index 2 / end
.. pattern eth / end actions sample ratio 2 index 0 / jump group 2 ...
This flow will result in all the matched ingress packets will be
jumped to next flow table, and the each second packet will be
marked and sent to queue 2 of the control application.
2. ...pattern eth / end actions sample ratio 2 / port_id id 2 ...
The flow will result in all the matched ingress packets will be
duplicated and sent to the representor peer (VF or wire) on DPDK port 2,
and the each second packet will also be sent to E-Switch manager vport.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This is a cleanup commit.
It assembles all tunnel outer updates into one function call to avoid
code duplications.
It defines RTE_VXLAN_GPE_DEFAULT_PORT (4790) in accordance with all
other tunnel protocol definitions.
It replaces all numeric values 4789 in their corresponding definition
RTE_VXLAN_GPE_DEFAULT_PORT.
It updates the 'csum parse-tunnel' documentation.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
IANA has assigned port 6081 as the fixed well-known destination port for
GENEVE. Nevertheless draft-ietf-nvo3-geneve-09 recommends that
implementations make this configurable. This commit enables specifying
any positive UDP destination port number for GENEVE protocol parsing.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
GENEVE is a widely used tunneling protocol in modern Virtualized
Networks. testpmd already supports parsing of several tunneling
protocols including VXLAN, VXLAN-GPE, GRE. This commit adds GENEVE
parsing of inner protocols (IPv4-0x0800, IPv6-0x86dd, Ethernet-0x6558)
based on IETF draft-ietf-nvo3-geneve-09. GENEVE is considered more
flexible than the other protocols. In terms of protocol format GENEVE
header has a variable length options as opposed to other tunneling
protocols which have a fixed header size.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Called rte_eth_dev_info_get() in testpmd, to get device info
so that speed capabilities can be printed under "show device info"
Bugzilla ID: 496
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit adds testpmd capability to query and config FEC
function of device. This includes:
- show FEC capabilities, example:
testpmd> show port 0 fec capabilities
- show FEC mode, example:
testpmd> show port 0 fec_mode
- config FEC mode, example:
testpmd> set port <port_id> fec_mode auto|off|rs|baser
where:
auto|off|rs|baser are four kinds of FEC mode which dev
support according to MAC link speed.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Chengchang Tang <tangchengchang@huawei.com>
The ethdev port id should be 16 bits now. This patch changes the
variable size of port id in applications from 8 bits to 16 bits.
Fixes: e977e4199a8d ("app/testpmd: add commands to load/unload BPF filters")
Fixes: 46cf97e4bbfa ("eventdev: add test for eth Tx adapter")
Cc: stable@dpdk.org
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ability to distinguish ICMP identifier fields in packets.
Distinguish ICMP sequence number field too.
Already supports ICMP code and type fields in current version.
Existing fields in ICMP header contain the required information.
ICMP header already is supported and no code change in RTE FLOW.
Extend testpmd CLI to include the fields of ident and sequence number.
One example:
flow create 0 ingress pattern eth / ipv4 /
icmp code is 1 ident is 5 seq is 6 /
end actions count / queue index 0 / end
The ICMP packet with code 1, identifier 5 and
sequence number 6 will be matched.
It will implement action counter and forward to queue 0.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A port can be closed in multiple situations:
- close command calling close_port() -> rte_eth_dev_close()
- exit calling close_port() -> rte_eth_dev_close()
- hotplug calling close_port() -> rte_eth_dev_close()
- hotplug calling detach_device() -> rte_dev_remove()
- port detach command, detach_device() -> rte_dev_remove()
- device detach command, detach_devargs() -> rte_eal_hotplug_remove()
The flow rules are flushed before each close.
It was already done in close_port(), detach_devargs() and
detach_port_device() which calls detach_device(),
but not in detach_device(). As a consequence, it was missing for siblings
of port detach command and unplugged device.
The check before calling port_flow_flush() is moved inside the function.
The state of the port to close is checked to be stopped.
As above, this check was missing in detach_device(),
impacting the cases of a multi-port device unplugged or detached
with the port detach command.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Since rte_eth_dev_release_port() is called on all port close operations,
the event RTE_ETH_EVENT_DESTROY can be reliably used for resetting
the port status on the application side.
The intermediate state RTE_PORT_HANDLING is removed in close_port()
because a port can also be closed by a PMD in a device remove operation.
In case multiple ports are closed, calling remove_invalid_ports()
only once is enough.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, the information of Rx/Tx queues from PMD driver is not
displayed exactly in the rxtx_config_display function. Because
"ports[pid].rx_conf" and "ports[pid].tx_conf" maintained in testpmd
application may be not the value actually used by PMD driver. For
instance, user does not set a field, but PMD driver has to use the
default value.
This patch fixes rxtx_config_display so that the information of Rx/Tx
queues can be really displayed for the PMD driver that implement
.rxq_info_get and .txq_info_get ops callback function.
Fixes: 75c530c1bd53 ("app/testpmd: fix port configuration print")
Fixes: d44f8a485f5d ("app/testpmd: enable per queue configure")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The number of desc is a per queue configuration. But in the check
function, nb_txd & nb_rxd are used to check whether the desc_id is
valid. nb_txd & nb_rxd are the global configuration of number of desc.
If the queue configuration is changed by cmdline liks: "port config xx
txq xx ring_size xxx", the real value will be changed.
This patch use the real value to check whether the desc_id is valid.
And if these are not configured by user. It will use the default value
to check it, since the rte_eth_rx_queue_setup & rte_eth_tx_queue_setup
will use a default value to configure the queue if nb_rx_desc or
nb_tx_desc is zero.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In txonly forward mode, the packet header is fixed by the initial
setting, including the packet length and checksum. So when the packets
varies, this may cause a packet header error. Currently, there are two
methods in txonly mode to randomly change the packets.
1. Set txsplit random and txpkts (x[,y]*), the number of segments
each packets will be a random value between 1 and total number of
segments determined by txpkts settings.
The step as follows:
a) ./testpmd -w xxx -l xx -n 4 -- -i --disable-device-start
b) port config 0 tx_offload multi_segs on
c) set fwd txonly
d) set txsplit rand
e) set txpkts 2048,2048,2048,2048
f) start
The nb_segs of the packets sent by testpmd will be 1~4. The real packet
length will be 2048, 4096, 6144 and 8192. But in fact the packet length
in ip header and udp header will be fixed by 8178 and 8158.
2. Set txonly-multi-flow. the ip address will be varied to generate
multiple flow.
The step as follows:
a) ./testpmd -w xxx -l xx -n 4 -- -i --txonly-multi-flow
b) set fwd txonly
c) start
The ip address of each pkts will change randomly, but since the header
is fixed, the checksum may be a error value.
Therefore, this patch adds a function to update the packet length and
check sum in the pkts header when the txsplit mode is set to rand or
multi-flow is set.
Fixes: 82010ef55e7c ("app/testpmd: make txonly mode generate multiple flows")
Fixes: 79bec05b32b7 ("app/testpmd: add ability to split outgoing packets")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, if nb_txd is not set, the txpkts is not allowed to be set
because the nb_txd is used to avoid the number of segments exceed the Tx
ring size and the default value of nb_txd is 0. And there is a bug that
nb_txd is the global configuration for Tx ring size and the ring size
could be changed by some command per queue. So these valid check is
unreliable and introduced unnecessary constraints.
This patch adds a valid check function to use the real Tx ring size to
check the validity of txpkts.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When failing to configure VLAN offloads after the port was started, there
is no need to update the port configuration. Currently, when user
configure an unsupported VLAN offloads and fails, and then restart the
port, it will fails since the configuration has been refreshed.
This patch makes the function return directly instead of refreshing the
configuration when execution fails.
Fixes: 384161e00627 ("app/testpmd: adjust on the fly VLAN configuration")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
To set Tx vlan offloads, it is required to stop port firstly. But before
checking whether the port is stopped, the port id entered by the user
is not checked for validity. When the port id is illegal, it would lead
to a segmentation fault since it attempts to access a member of
non-existent port.
This patch adds verification of port id in tx vlan offloads and remove
duplicated check.
Fixes: 597f9fafe13b ("app/testpmd: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add module EEPROM/EEPROM dump command
"show port <port_id> (module_eeprom|eeprom)"
Commands will dump the content of the EEPROM/module
EEPROM for the selected port.
Signed-off-by: David Liu <dliu@iol.unh.edu>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace use of RTE_MACHINE_CPUFLAG macros with regular compiler
macros, which are more complete than those provided by DPDK, and as such
it allows new instruction sets to be leveraged without having to do
extra work to set them up in DPDK.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add a field named rx_buf_size in rte_eth_rxq_info to indicate the buffer
size used in receiving packets for HW.
In this way, upper-layer users can get this information by calling
rte_eth_rx_queue_info_get.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add usage of rte_eth_link_to_str function to applications and docs.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding support to set RSS level from ethdev config.
level-default will requests the default behavior.
level-outer will requests RSS to be performed on the outermost packet
encapsulation level.
level-inner will request RSS to be performed on the specified inner
packet encapsulation level, from outermost to innermost.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The bitrate library in DPDK is actually in a "bitratestats" directory,
so that is used by meson for the macro and library name.
Therefore, we need to update references to RTE_LIBRTE_BITRATE to
RTE_LIBRTE_BITRATESTATS in testpmd to have it found. Rather than
supporting both defines, since make is being removed, we can just
replace all instances of the former define with the latter.
To ensure testpmd links ok when this is done, we also need to add
bitratestats to the list of library dependencies.
Fixes: 5b9656b157d3 ("lib: build with meson")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Wei Ling <weix.ling@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add TM command to enable packet mode for all SP children
in non leaf node. This is a new command as
"add tm nonleaf node pktmode".
Also add support to shaper profile add command to take
packet mode parameter used to setup shaper in packet mode.
This adds an extra argument "packet_mode" to shaper profile add command
"add port tm node shaper profile" as last argument.
This patch also dumps new tm port/level/node capabilities
sched_wfq_packet_mode_supported, sched_wfq_byte_mode_supported,
shaper_private_packet_mode_supported, shaper_private_byte_mode_supported,
shaper_shared_packet_mode_supported, shaper_shared_byte_mode_supported.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The testpmd application forwards data in multiple threads.
In the txonly mode the Tx timestamps must be initialized
on per thread basis to provide phase shift for the packet
burst being sent. This per thread initialization was performed
on zero value of the variable in thread local storage and
happened only once after testpmd forwarding start. Executing
"start" and "stop" commands did not cause thread local variables
zeroing and wrong timestamp values were used.
Fixes: 4940344dab1d ("app/testpmd: add Tx scheduling command")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
This patch fix the error line break in the output format of flow query
Fixes: bdb1d61690f7 ("app/testpmd: support RSS config in flow query")
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In order to verify offloading of eCPRI protocol via flow rules, the
command line of flow creation should support the parsing of the eCPRI
pattern.
Based on the specification, one eCPRI message will have the common
header and payload. Payload format is various based on the type field
of the common header. Fixed strings will be used instead of integer
to make the CLI easy for auto-completion.
The testpmd command line examples of flow to match eCPRI item are
listed below:
1. flow create 0 ... pattern eth / ecpri / end actions ...
This is to match all eCPRI messages.
2. flow create 0 ... pattern eth / ecpri common type rtc_ctrl / end actions ...
This is to match all eCPRI messages with the type #2 - "Real-Time
Control Data".
3. flow create 0 ... pattern eth / ecpri common type iq_data pc_id is [U16Int] / end actions ...
This is to match eCPRI messages with the type #0 - "IQ Data", and
the physical channel ID 'pc_id' of the messages is a specific
value. Since the sequence ID is changeable, there is no need to
match that field in the flow.
Currently, only type #0, #2 and #5 will be supported.
Since eCPRI could be over Ethernet layer (or after .1Q) and UDP
layer, it is the PMD driver's responsibility to check whether eCPRI
is supported and which protocol stack is supported. Network byte
order should be used for eCPRI header, the same as other headers.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The new 5-tuple swap engine swaps:
source and destination mac address,
source and destination address in ipv4/ipv6,
source and destination port in UDP/TCP.
The forwarding engine will parse each layer
and swap it, and will stop when the next
layer doesn't match.
The mentioned headers of ICMP/ARP/Multicast
packets will be swapped as well according to
matching layers.
usage: --forward-mode=5tswap
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit adds testpmd capability to provide timestamps on the packets
being sent in the txonly mode. This includes:
- SEND_ON_TIMESTAMP support
new device Tx offload capability support added, example:
testpmd> port config 0 tx_offload send_on_timestamp on
- set txtimes, registers field and flag, example:
testpmd> set txtimes 1000000,0
This command enables the packet send scheduling on timestamps if
the first parameter is not zero, generic format:
testpmd> set txtimes (inter),(intra)
where:
inter - is the delay between the bursts in the device clock units.
If "intra" (next parameter) is zero, this is the time between the
beginnings of the first packets in the neighbour bursts, if "intra"
is not zero, "inter" specifies the time between the beginning of
the first packet of the current burst and the beginning of the last
packet of the previous burst. If "inter"parameter is zero the send
scheduling on timestamps is disabled (default).
intra - is the delay between the packets within the burst specified
in the device clock units. The number of packets in the burst is
defined by regular burst setting. If "intra" parameter is zero no
timestamps provided in the packets excepting the first one in the
burst.
As the result the bursts of packet will be transmitted with
specific delay between the packets within the burst and specific
delay between the bursts. The rte_eth_read_clock() is supposed to
be engaged to get the current device clock value and provide the
reference for the timestamps. If there is no supported
rte_eth_read_clock() there will be no provided send scheduling on
the device.
- show txtimes, displays the timing settings
- txonly burst time pattern
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In txonly and flowgen forwarding mode, calculating CPU per packets with
total received packets is not accurate. Use total transmitted packets
for these cases.
The error output under txonly mode:
testpmd> show fwd stats all
---------------------- Forward statistics for port 0 -------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 3582891927 TX-dropped: 401965824 TX-total: 3984857751
TX-bursts : 86381636 [0% of 0 pkts + 85% of 64 pkts + 15% of 32 pkts]
-------------------------------------------------------------------------
---------------------- Forward statistics for port 1 -------------------
RX-packets: 1 RX-dropped: 394351696 RX-total: 394351697
TX-packets: 3582890632 TX-dropped: 401965568 TX-total: 3984856200
TX-bursts : 86381679 [0% of 0 pkts + 85% of 64 pkts + 15% of 32 pkts]
-------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++
RX-packets: 1 RX-dropped: 394351696 RX-total: 394351697
TX-packets: 7165782559 TX-dropped: 803931392 TX-total: 7969713951
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
CPU cycles/packet=54984156291.00 \
(total cycles=54984156291 / total RX packets=1) at 200 MHz Clock
Fixes: 53324971a14e ("app/testpmd: display/clear forwarding stats on demand")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Softnic can be used like other virtual devices without
needing any special mode. Therefore, remove softnic mode
from testpmd app. Documentation is updated as well.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch support RSS action in flow query.
It can display the RSS configuration of the specified rule.
For example:
we can create an RSS rule by command "flow create 0 ingress
pattern eth / ipv4 / tcp / end actions rss types ipv4-tcp
l3-src-only l4-dst-only end queues end func symmetric_toeplitz
/ end" and then query it "flow query 0 0 rss"
the log will be follow
RSS:
queues: none
function: symmetric_toeplitz
types:
ipv4-tcp
l3-src-only
l4-dst-only
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The legacy filter API will be superseded. This patch use
private api to change the implementation of commands
global_config <port_id> gre-key-len <key_len> and
show port fdir <port_id>
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The number of empty polls provides information about available
CPU head room in the presence of continuous polling.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
The burst % calculation can over flow due to multiplication.
Fix the multiplication and increase the size of variables to
64b.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
The throughput calculation requires a counter that measures
passing of time. However, the kernel saves and restores the PMU
state when a thread is unscheduled and scheduled. This ensures
that the PMU cycles are not counted towards a thread that is
not scheduled. Hence, when RTE_ARM_EAL_RDTSC_USE_PMU is enabled,
the PMU cycles do not represent the passing of time.
This results in incorrect calculation of throughput numbers.
Use clock_gettime system call to calculate the time passed since
last call.
Bugzilla ID: 450
Fixes: 0e106980301d ("app/testpmd: show throughput in port stats")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
