The vmbus scan code can just skip non-network devices.
More importantly, this fixes the bug where some vmbus devices
don't have all the attributes (like monitor_id) and a single
failure would cause the scan to break the loop.
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Using access followed by open causes a static analysis warning
about Time of check versus Time of use. Also, access() and
open() have different UID permission checks.
This is not a serious problem; but easy to fix by using errno instead.
Coverity issue: 300870
Fixes: 4a928ef9f611 ("bus/pci: enable write combining during mapping")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Currently, IPC API will silently ignore unsupported IPC.
Fix the API call and its callers to explicitly handle
unsupported IPC cases.
For primary processes, it is OK to not have IPC because
there may not be any secondary processes in the first place,
and there are valid use cases that disable IPC support, so
all primary process usages are fixed up to ignore IPC
failures.
For secondary processes, IPC will be crucial, so leave all
of the error handling as is.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When checking RTE_PCI_DRV_IOVA_AS_VA flag to determine IOVA mode,
pci_one_device_has_iova_va() returns true only if kernel driver of the
device is vfio. However, Mellanox mlx4/5 PMD doesn't need to be detached
from kernel driver and attached to VFIO/UIO. Control path still goes
through the existing kernel driver, which is mlx4_core/mlx5_core. In order
to make RTE_PCI_DRV_IOVA_AS_VA effective for mlx4/mlx5 PMD, a new kernel
driver type has to be introduced.
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
The lcore_config structure will be hidden in future release.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Printing a null pointer with %s is flagged as a warning by GCC 9, and
should not be done. Replace the %s with the word "null" itself.
Fixes: 828d51d8fc3e ("bus/fslmc: refactor scan and probe functions")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
If secondary process attempt to mmap the resource resulted in
the wrong address, then it would leave behind the bad mmap.
Coverity issue: 337675, 337664
Fixes: 2a28a502c607 ("bus/vmbus: map ring in secondary process")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
In many scenarios, AFU is needed searched by name, this
function add the feature.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
AFU can be implemented into many different acceleration
devices, these devices need shared data to store private
information when they are handled by users.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
MC firmware is the core component of FSLMC bus and DPAA2 devices.
Prior to this patch, MC firmware supported 10.10.x version. This
patch bumps the min supported version to 10.14.x.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Removes some unused firmware code which was added in last bump
of the firmware version. No current features uses these APIs.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
- fle pool allocations should be done for each process.
- cryptodev->data is shared across muliple processes but
cryptodev itself is allocated for each process. So any
information which needs to be shared between processes,
should be kept in cryptodev->data.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
This fixes the following compile error with musl libc:
drivers/bus/fslmc/qbman/include/compat.h:41:10: error:
'stdout' undeclared (first use in this function)
fflush(stdout); \
^~~~~~
Fixes: 531b17a780dc ("bus/fslmc: add QBMAN driver to bus")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Fixes following build error with musl libc:
In file included from drivers/bus/fslmc/qbman/qbman_debug.c:6:
drivers/bus/fslmc/qbman/include/compat.h:21:10: fatal error:
error.h: No such file or directory
#include <error.h>
^~~~~~~~~
Apparently it is not used anywere in qbman so simply remove the include.
Fixes: 531b17a780dc ("bus/fslmc: add QBMAN driver to bus")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
The DPDK APIs expose 3 different modes to work with memory used for DMA:
1. Use the DPDK owned memory (backed by the DPDK provided hugepages).
This memory is allocated by the DPDK libraries, included in the DPDK
memory system (memseg lists) and automatically DMA mapped by the DPDK
layers.
2. Use memory allocated by the user and register to the DPDK memory
systems. Upon registration of memory, the DPDK layers will DMA map it
to all needed devices. After registration, allocation of this memory
will be done with rte_*malloc APIs.
3. Use memory allocated by the user and not registered to the DPDK memory
system. This is for users who wants to have tight control on this
memory (e.g. avoid the rte_malloc header).
The user should create a memory, register it through rte_extmem_register
API, and call DMA map function in order to register such memory to
the different devices.
The scope of the patch focus on #3 above.
Currently the only way to map external memory is through VFIO
(rte_vfio_dma_map). While VFIO is common, there are other vendors
which use different ways to map memory (e.g. Mellanox and NXP).
The work in this patch moves the DMA mapping to vendor agnostic APIs.
Device level DMA map and unmap APIs were added. Implementation of those
APIs was done currently only for PCI devices.
For PCI bus devices, the pci driver can expose its own map and unmap
functions to be used for the mapping. In case the driver doesn't provide
any, the memory will be mapped, if possible, to IOMMU through VFIO APIs.
Application usage with those APIs is quite simple:
* allocate memory
* call rte_extmem_register on the memory chunk.
* take a device, and query its rte_device.
* call the device specific mapping function for this device.
Future work will deprecate the rte_vfio_dma_map and rte_vfio_dma_unmap
APIs, leaving the rte device APIs as the preferred option for the user.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The fman device list need to be accessed across processes.
The hw device structures should be allocated with rte_calloc
instead of calloc. The rte_calloc is not available at the
time of bus scan, so better prepare the device list at probe.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A reference to qman_fq_lookup_table need to be saved in each
fq, so that it is retrieved while in running secondary process.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Current value of 'fmbm_rfsdm' register (0x010CE3F0) doesn't include
the bit to drop colored (red) packets. New value (0x010EE3F0) fixes
this.
Check with 'fmbm_rffc' register of fm_port_bmi_regs.
Fixes: 6d6b4f49a155 ("bus/dpaa: add FMAN hardware operations")
Cc: stable@dpdk.org
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The fslmc bus code was duplicating the device name and
doing extra initialization. The code can be simplified
to just use the device name directly.
Compile tested only; do not have this hardware.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When fslmc is built as part of a general distribution, the
bus code will log errors when other devices are present.
This could confuse users it is not an error.
Fixes: 50245be05d1a ("bus/fslmc: support device blacklisting")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>
The secondary mapping function was duplicating the code
used to search the uio_resource list.
Skip the unwinding since map failure already makes device
unusable.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Need to remember primary channel in secondary process.
Then use it to iterate over subchannels in secondary
process mapping setup.
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
If vmbus is run on older kernel (without all the uio mappings),
then the bus driver should stop when it hits the missing mappings
rather than recording the empty values.
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
The code was testing the result of mmap incorrectly.
I.e the test that a local pointer is not MAP_FAILED would
always succeed and therefore hid any potential problems.
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
The secondary process doesn't correctly map the second
and later resources because it doesn't change the offset.
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
All drivers should have SPDX on the first line of the source
files in the format
/* SPDX-License-Identifier: ...
Several files used minor modifications which were inconsistent
with the pattern. Fix it to make scanning tools easier.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The term "linuxapp" is a legacy one, but just calling the subdirectory
"linux" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
In case vdev was already probed, it shouldn't be probed again,
and it should return -EEXIST as error.
There are some checks in vdev_probe() and insert_vdev(),
but a check was missing in vdev_plug().
The check is moved in vdev_probe_all_drivers() which is called
in all code paths.
Fixes: e9d159c3d534 ("eal: allow probing a device again")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The log was printing the device name two times,
first one being supposed to be the driver name.
As we don't know yet the driver name, the log is simplified.
Fixes: 9bf4901d1a11 ("bus/vdev: remove probe with driver name option")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
In the original code, when an AFU device probe a driver,
if the first driver in the driver list does not support
this device or some error happens, bus probe returns an error.
With this patch, a device will try to match driver in the driver
list one by one until an appropriate driver is found.
If some error happens, the error is returned. If the current driver
does not support the device, just try the next driver in the list.
If all the drivers in the list are tried and no driver matches,
0 is returned. Otherwise, the error code is returned.
Fixes: 05fa3d4a6539 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Original driver requires users to input "afu_bts" args.
But driver can also work without an explicit "afu_bts" args.
Fixes: 05fa3d4a6539 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf is used
Fixes: 828d51d8fc ("bus/fslmc: refactor scan and probe functions")
Fixes: c22fab9a6c ("raw/dpaa2_qdma: support configuration APIs")
Fixes: e5cbdfc537 ("crypto/dpaa2_sec: add basic operations")
Fixes: b23d4e898a ("crypto/dpaa2_sec: add per dev mempool to store FLE")
Fixes: 623326dded ("crypto/dpaa2_sec: introduce poll mode driver")
Fixes: e7a45f3cc2 ("crypto/caam_jr: add UIO specific operations")
Fixes: f44bccadd8 ("crypto/caam_jr: add device basic operations")
Fixes: 7e3e2954e0 ("crypto/dpaa_sec: move mempool allocation to config")
Fixes: c3e85bdcc6 ("crypto/dpaa_sec: add crypto driver for NXP DPAA platform")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Previously FSLMC bus only supported blacklisting of DPNI (eth),
DPSECI (crypto) devices. With this patch, devices like DPIO,
DPMCP, and other DP* can also be blacklisted/whitelisted.
This is a required condition for secondary processes where the
secondary needs to be passed a mutually exclusive list of
resources as compared the primary and all other secondaries.
This patch also moves the DPIO memory from malloc to hugepage so
that in future in case the DPIO list can be shared, it can be
accessed in secondaries.
Once this patch is done, multi-process cases can be executed by
whitelisting/blacklisting devices in each instance.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The I/O threads for DPAA2 take their reference for bpool ID, the
port ID and other info like qdid, from the rte_eth_dev. Further,
to get this data during I/O operation, a reference of the RTE
device is kept in the queue structure (dpaa2_queue).
In case of secondary processes, rte_eth_dev is not same as the
primary process. Thus, the reference goes invalid.
This patch changes the implementation to use the dev_private
rather than the rte_eth_dev as that is shared area across
all the processes.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Initial design was to have the buffer pool per process where a
global static array stores the bpids. But, in case of secondary
processes, this would not allow the I/O threads to translate the
bpid in Rx'd packets.
This patch moves the array to a global area (rte_malloc) and in
case of Rx thread not containing a valid reference to the array,
reference is build using the handle avaialble in the dpaa2_queue.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add support in bus and vfio to scan dpdmux type of objects
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
