Platform specific guide for Marvell OCTEON CN9K/CN10K SoC is added.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
UMR (User-Mode Memory Registration) WQE can present data buffers
scattered within multiple mbufs with single indirect mkey. Take
advantage of the UMR WQE, scattered mbuf in one operation can be
presented to an indirect mkey. The RegEx which only accepts one
mkey can now process the whole scattered mbuf in one operation.
The maximum scattered mbuf can be supported in one UMR WQE is now
defined as 64. The mbufs from multiple operations can be combined
into one UMR WQE as well if there is enough space in the KLM array,
since the operations can address their own mbuf's content by the
mkey's address and length. However, one operation's scattered mbuf's
can't be placed in two different UMR WQE's KLM array, if the UMR
WQE's KLM does not has enough free space for one operation, the
extra UMR WQE will be engaged.
In case the UMR WQE's indirect mkey will be over wrapped by the SQ's
WQE move, the mkey's index used by the UMR WQE should be the index
of last the RegEX WQE in the operations. As one operation consumes
one WQE set, build the RegEx WQE by reverse helps address the mkey
more efficiently. Once the operations in one burst consumes multiple
mkeys, when the mkey KLM array is full, the reverse WQE set index
will always be the last of the new mkey's for the new UMR WQE.
In GGA mode, the SQ WQE's memory layout becomes UMR/NOP and RegEx
WQE by interleave. The UMR and RegEx WQE can be called as WQE set.
The SQ's pi and ci will also be increased as WQE set not as WQE.
For operations don't have scattered mbuf, uses the mbuf's mkey directly,
the WQE set combination is NOP + RegEx.
For operations have scattered mbuf but share the UMR WQE with others,
the WQE set combination is NOP + RegEx.
For operations complete the UMR WQE, the WQE set combination is UMR +
RegEx.
Signed-off-by: John Hurley <jhurley@nvidia.com>
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The name of the constant PCI_ANY_ID was missing RTE_ prefix.
It is renamed, and the old name becomes a deprecated alias.
While renaming, the duplicate definitions in rte_bus_pci.h
are removed to keep only those in rte_pci.h.
Note: rte_pci.h is included in rte_bus_pci.h
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Add device arguments to support runtime options.
And use these configuration to control the link setup flow, to adapt to
different NIC's construction. Use firmware version to control the impact
of firmware update. And fix some left bugs.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Remove OS restriction and update release notes.
For the record, tested on the following setup with Windows Server 2019 in
QEMU (-device vmxnet3) :
[ping ] [ ] [ ping]
[OS ] [ dpdk-skeleton ] [ OS]
[virtio---]--sockets--[---vmxnet3 vmxnet3---]--sockets--[---virtio]
[Debian VM] [ Windows VM ] [Debian VM]
Debian VMs successfully ping'd each other with Windows forwarding.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Add support for query Rx descriptor status in hns3 driver. Check the
descriptor specified and provide the status information of the
corresponding descriptor.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Add support for query Tx descriptor status in hns3 driver. Check the
descriptor specified and provide the status information of the
corresponding descriptor.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Kunpeng930 support outer UDP cksum, this patch add support for it.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, the driver support multiple IO burst function and auto
selection of the most appropriate function based on offload
configuration.
Most applications such as l2fwd/l3fwd don't provide the means to
change offload configuration, so it will use the auto selection's io
burst function.
This patch support runtime config to select io burst function, which
add two config: rx_func_hint and tx_func_hint, both could assign
vec/sve/simple/common.
The driver will use the following rules to select io burst func:
a. if hint equal vec and meet the vec Rx/Tx usage condition then use the
neon function.
b. if hint equal sve and meet the sve Rx/Tx usage condition then use the
sve function.
c. if hint equal simple and meet the simple Rx/Tx usage condition then
use the simple function.
d. if hint equal common then use the common function.
e. if hint not set then:
e.1. if meet the vec Rx/Tx usage condition then use the neon function.
e.2. if meet the simple Rx/Tx usage condition then use the simple
function.
e.3. else use the common function.
Note: the sve Rx/Tx usage condition based on the vec Rx/Tx usage
condition and runtime environment (which must support SVE).
In the previous versions, driver will preferred use the sve function
when meet the sve Rx/Tx usage condition, but in this case driver could
get better performance if use the neon function.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
In this commit we generalize the movement of user-specified
meta data between mbufs and FPGA AXIS tuser fields using
user-defined hook functions.
- Previous use of PMD dynfields are removed
- Remove emptied rte_pmd_ark.h
- Hook function added to ark_user_ext
- Add hook function calls in Rx and Tx paths
- Update guide with example of hook function use
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
- New PCIe IDs using net/ark driver
- Update Version IDs and structures specified by hardware
- New internal descriptor status for TX
- Adjust data placement in RX operations, headroom in retained for
segmented mbufs
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Rename the key opaque pointer from rte_tls_key to
rte_thread_key to avoid confusion with transport layer security.
Also rename and remove the "_tls" term from the following
functions to avoid redundancy:
rte_thread_tls_key_create
rte_thread_tls_key_delete
rte_thread_tls_value_set
rte_thread_tls_value_get
Suggested-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Suggested-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
The function for registration of callbacks for legacy telemetry was
documented as internal-only in the API documents, but marked as
experimental in the version.map file. Since this is an internal-only
function, for consistency we update the version mapping to have it as
internal.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
The NIC can have multiple PCIe links and can be attached to the multiple
hosts, for example the same single NIC can be shared for multiple server
units in the rack. On each PCIe link NIC can provide multiple PFs and
VFs/SFs based on these ones. To provide the unambiguous identification
of the PCIe function the controller index is added. The full representor
identifier consists of three indices - controller index, PF index, and
VF or SF index (if any).
This patch introduces controller index to ethdev representor syntax,
examples:
[[c#]pf#]vf#: VF port representor/s, example: pf0vf1
[[c#]pf#]sf#: SF port representor/s, example: c1pf1sf[0-3]
c# is controller(host) ID/range in case of multi-host, optional.
For user application (e.g. OVS), PMD is responsible to interpret and
locate representor device based on controller ID, PF ID and VF/SF ID in
representor syntax.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
With Kernel bonding, multiple underlying PFs are bonded, VFs come
from different PF, need to identify representor of VFs unambiguously by
adding PF index.
This patch introduces optional 'pf' section to representor devargs
syntax, examples:
representor=pf0vf0 - single VF representor
representor=pf[0-1]sf[0-1023] - SF representors from 2 PFs
PF type representor is supported by using standalone 'pf' section:
representor=pf1 - PF representor
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
SubFunction is a portion of the PCI device, created on demand, a SF
netdev has its own dedicated queues(txq, rxq). A SF netdev supports
eswitch representation offload similar to existing PF and VF
representors.
To support SF representor, this patch introduces new devargs syntax,
examples:
representor=sf0 - single SubFunction representor
representor=sf[1,3,5] - single list
representor=sf[0-3], - single range
representor=sf[0,2-6,8,10-12] - list with singles and ranges
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Current VF representor syntax:
representor=2 - single representor
representor=[0-3] - single range
To prepare for more representor types, this patch adds compatible VF
representor devargs syntax:
vf#:
representor=vf2 - single representor
representor=vf[1,3,5] - single list
representor=vf[0-3] - single range
representor=vf[0,1,4-7] - list with singles and range
For backwards compatibility, representor "#" is interpreted as "vf#".
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To support more representor type, this patch introduces representor type
enum. The enum is subject to be extended to support new representor in
patches upcoming.
For each devarg structure, only one type supported.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Brought in the latest hsi_struct_def_dpdk.h.
HWRM API is now updated to version 1.10.2.15.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This commit introduces support for preferred busy polling
to the AF_XDP PMD. This feature aims to improve single-core
performance for AF_XDP sockets under heavy load.
A new vdev arg is introduced called 'busy_budget' whose default
value is 64. busy_budget is the value supplied to the kernel
with the SO_BUSY_POLL_BUDGET socket option and represents the
busy-polling NAPI budget. To set the budget to a different value
eg. 256:
--vdev=net_af_xdp0,iface=eth0,busy_budget=256
Preferred busy polling is enabled by default provided a kernel with
version >= v5.11 is in use. To disable it, set the budget to zero.
The following settings are also strongly recommended to be used in
conjunction with this feature:
echo 2 | sudo tee /sys/class/net/eth0/napi_defer_hard_irqs
echo 200000 | sudo tee /sys/class/net/eth0/gro_flush_timeout
.. where eth0 is the interface being used by the PMD.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for forced ethernet speed setting.
Currently testpmd tries to configure the Ethernet port in autoneg mode.
It is not possible to set the Ethernet port to a specific speed while
starting testpmd. In some cases capability to configure a forced speed
for the Ethernet port during initialization may be necessary. This patch
tries to add this support.
The patch assumes full duplex setting and does not attempt to change that.
So speeds like 10M, 100M are not configurable using this method.
The command line to configure a forced speed of 10G:
dpdk-testpmd -c 0xff -- -i --eth-link-speed 10000
The command line to configure a forced speed of 50G:
dpdk-testpmd -c 0xff -- -i --eth-link-speed 50000
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The normal operation of devices with copper phys depends on the
initialization and configuration of the PHY chip. The task of
driving the PHY chip is implemented in some firmware versions.
If firmware supports the phy driver, it will report a capability
flag to driver in probing process. The driver determines whether
to support PF device with copper phys based on the capability bit.
If supported, the driver set a flag indicating that the firmware
takes over the PHY, and then the firmware initializes the PHY.
This patch supports the query of link status and link info, and
existing basic features for PF device with copper phys.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
This patch add support tx_done_cleanup ops, which could support for
the API rte_eth_tx_done_cleanup to free consumed mbufs on Tx ring.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
This patch add support for dumping module EEPROM.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Rename PKT_RX_EIP_CKSUM_BAD to PKT_RX_OUTER_IP_CKSUM_BAD and
deprecate the original name. The new name is better aligned
with existing PKT_RX_OUTER_* flags, which should help reduce
confusion about its use.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Introduce virtual function driver in txgbe PMD,
add simple init and uninit function to probe and remove the device.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Add support for displaying the count of used (filled by hardware
but not yet processed by the driver) descriptors on a receive
queue in order to allow the rte_eth_dev rx_queue_count() API to
be exercised and tested.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Start a new release cycle with empty release notes.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The build tool pmdinfogen was rewritten in DPDK 21.02,
adding Windows support.
There is a new build-time dependency: pyelftools.
Fixes: f0f93a7adfee ("buildtools: use Python pmdinfogen")
Fixes: 6b19edcb663c ("build: enable pmdinfogen for Windows")
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The "rte_telemetry_init()" function is for use by "rte_eal_init()" and
should not be part of the public API. Mark it as internal only.
Fixes: 6dd571fd07c3 ("telemetry: introduce new functionality")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add release note for the new crypto perf graphing script.
Fixes: f400e0b82bf1 ("app/crypto-perf: add script to graph perf results")
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Add documentation to support i40e PMD on Windows.
Update the release notes and features list for the same.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The ionic PMD only supports Tx queue version 1 or greater.
Version 1 introduced a new SGL format with support for more
fragments per descriptor.
Add release notes and an explanation to the docs.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Add support for new MODIFY_FIELD action to the Mellanox PMD.
This is the generic API that allows to manipulate any packet
header field by copying data from another packet field or
mark, metadata, tag, or immediate value (or pointer to it).
Since the API is generic and covers a lot of action under its
umbrella it makes sense to implement all the mechanics gradually
in order to move to this API for any packet field manipulations
in the future. This is the first step of RTE flows consolidation.
The modify field RTE flow action supports three operations: set,
add and sub. This patch brings to live only the "set" operation.
Support is provided for any packet header field as well as
meta/tag/mark and immediate value can be used as a source.
There are few limitations for this first version of API support:
- encapsulation levels are not supported, just outermost header
can be manipulated for now.
- offsets can only be 4-bytes aligned: 32, 64 and 96 for IPv6.
- the special ITEM_START ID is not supported as we do not allow
to cross packet header field boundaries yet.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch adds support of the mbuf fast free offload to the
transmit datapath. This offload allows freeing the mbufs on
transmit completion in the most efficient way. It requires
the all mbufs were allocated from the same pool, have
the reference counter value as 1, and have no any externally
attached buffers.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently, the maximal flow priority in non-root table to user
is 4, it's not enough for user to do some flow match by priority,
such as LPM, for one IPV4 address, we need 32 priorities for each
bit of 32 mask length.
PMD will manage 3 sub-priorities per user priority according to L2,
L3 and L4. The internal priority is 16 bits, user can use priorities
from 0 - 21843.
Those enlarged flow priorities are only used for ingress or egress
flow groups greater than 0 and for any transfer flow group.
Signed-off-by: Dong Zhou <dongzhou@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
While there's the modify action and sample action with ratio=1
in the E-Switch flow, and modify action is after the sample
action, means that the modify should only impact on after sample.
MLX5 PMD will monitor the above case and split the E-Switch flow
into two sub flows, similar as sample flow did before:
- the prefix sub flow with all actions preceding the sample and the
sample action itself, also append the new jump action after sample
in the prefix sub flow;
- the suffix sub flow with the modify action and other actions
following the sample action.
The flow split as below:
Original flow: items / actions pre / sample / modify / actions sfx
prefix sub flow -
items / actions pre / set_tag action / sample / jump
suffix sub flow -
tag_item / modify / actions sfx
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
mlx5 E-Switch mirroring is implemented as multiple destination array in
one steering table. The array currently supports only port ID as
destination actions.
This patch adds the jump action support to the array as one of
destination.
The packets can be mirrored to the port and jump to the next table in
the same destination array allowing to continue handling in the new
table.
For example:
set sample_actions 0 port_id id 1 / end
flow create 0 ingress transfer pattern eth / end actions
sample ratio 1 index 0 / jump group 1 / end
flow create 1 ingress transfer group 1 pattern eth / end actions
set_mac_dst mac_addr 00:aa:bb:cc:dd:ee / port_id id 2 / end
The flow results all the matched ingress packets are mirrored
to port id 1 and go to group 1. In the group 1, packets are modified
with the destination mac and sent to port id 2.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add eCPRI tunnel port add and rm ops to configure eCPRI UDP tunnel port
in "Device Config Function" (DCF).
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The check-includes script allowed checking header files in a given
directory to ensure that each header compiled alone without requiring
any other header inclusions.
With header checking now being done by the chkincs app in the build
system this script can be removed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
