Only provide empty handler.
It can be completed to support filter features on fortville.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove unused empty functions]
i40e hardware supports RSS in VF.
It's now supported in this driver.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
To reuse code, 'i40e_config_hena()' and 'i40e_parse_hena()' and
their relevant macros need to be extern, and then can be used for
both PF and VF parts.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
It fixes the compile error as below on gcc version 4.3.4.
cc1: error: unrecognized command line option "-Wno-unused-but-set-variable"
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf
structures. This patch allows the user to get a default optimal RX/TX configuration
through rte_eth_dev_info get, and still any parameters may be tweaked as wished,
before setting up queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
[Thomas: split patch]
Fix the descriptor initialization loop, so that it initializes
the i40e_tx_desc::cmd_type_offset_bsz for the correct index
into the tx_ring array.
Previously it would use the index once to initialize the txd
local variable, then again when setting cmd_type_offset_bsz.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Overloading the 'msg_size' field in the 'arq_event_info' struct
is a bad idea. It leads to bugs when the structure is used in a
loop, since the input value (buffer size) is overwritten by the
output value (actual message length). The fix introduces one
more field of 'buf_len' for the buffer size, and renames the
field of 'msg_size' to 'msg_len' for the real message size.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
The firmware api request of writes to hardware registers should be
exposed to driver. The new API of 'i40e_aq_debug_write_register'
is introduced for that.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
10G base T type support is added.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
The fix is to use get_link_status but not get_phy_capabilities
for reporting FC settings.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
The workaround helps fix the API if the FW is 4.2 or later.
In addition, an unreachable 'break' statement has been removed.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
There are variables that represent values in little endian.
Adding prefix of '__Le' can remove warnings during sparse
checks. In addition, remove some unreachable 'break' statements,
and add 'UL' on a couple of constants.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Force a shifted '1' to be 'unsigned' to avoid shifting a signed int.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
The code wrapped in '#ifdef I40E_TPH_SUPPORT' was added
to check if 'TPH' (TLP Processing Hints) is supported, and enable it.
It is not used currently and can be removed.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
The code wrapped in '#ifdef I40E_DCB_SW' is currently for software
validation only, it should be removed at all.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
The code wrapped in '#ifdef PREBOOT_SUPPORT' was added for
queue context initialization specifically for A0 silicon.
As A0 silicon has gone for a long time, the code should be
removed at all. In addition, the checks of 'QV_RELEASE'
and 'PREBOOT_SUPPORT' are also not needed anymore and can
be removed.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
The code wrapped in '#ifdef DMA_SYNC_SUPPORT' was written specially
for Solaris, it is not needed anymore for others including DPDK.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
The code wrapped in '#ifdef ETHTOOL_TEST' in i40e_diag.c is for
ethtool testing only, it is not needed anymore and can be removed.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
'nvmupdate' is intended to support the userland NVMUpdate tool for
Fortville eeprom. These code changes is to remove the conditional
compile macro, and support those by default. In addition, renaming
all 'errno' to avoid any compile warning or error.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
In share code, 'tab' is used to align values rather than 'space'.
The changes in i40e_adminq_cmd.h is to make the indentation more
consistent in share code.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Chen Jing <jing.d.chen@intel.com>
Tested-by: HuilongX Xu <huilongx.xu@intel.com>
Rename start_?x_per_q to ?x_deferred_start
and add comments.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
'init' messages should always be logged and filtered at runtime by rte_log.
All the more so as these messages are not in the datapath.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
- remove leading \n in some messages,
- remove trailing \n in some messages,
- split multi lines messages.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Jay Rolette <rolette@infiniteio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Prepare for next commit, indent sections where log messages will be modified so
that next patch is only about \n.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Since base driver always add a trailing \n, add a PMD_DRV_LOG_RAW macro that
will not add one.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
- Don't use DEBUGFUNC macro in pmd.
- Don't use printf for logs.
- We should avoid calling RTE_LOG directly as pmd provides a wrapper for logs.
- Replace some PMD_INIT_LOG(DEBUG, "some_func") with PMD_INIT_FUNC_TRACE().
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Jay Rolette <rolette@infiniteio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The offload flags field (ol_flags) was 16-bits and had no further room
for expansion. This patch increases the field size to 64-bits, using up
the remaining reserved space in the single-cache-line mbuf.
NOTE: none of the values for existing flags have been changed, i.e. no
new numbers have been explicitly reserved between existing flag
definitions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The mbuf structure already contains a pointer to the beginning of the
buffer (m->buf_addr). It is not needed to use 8 bytes again to store
another pointer to the beginning of the data.
Using a 16 bits unsigned integer is enough as we know that a mbuf is
never longer than 64KB. We gain 6 bytes in the structure thanks to
this modification.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated to apply to latest on mainline.
* Disabled vector PMD in config as it relies heavily on the mbuf layout
This will be re-enabled in a subsequent commit once vPMD has been
reworked to take account of mbuf changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The vlan_macip structure combined a vlan tag id with l2 and l3 headers
lengths for tracking offloads. However, this structure was only used as
a unit by the e1000 and ixgbe drivers, not generally.
This patch removes the structure from the mbuf header and places the
fields into the mbuf structure directly at the required point, without
any net effect on the structure layout. This allows us to treat the vlan
tags and header length fields as separate for future mbuf changes. The
drivers which were written to use the combined structure still do so,
using a driver-local definition of it.
Reduce perf regression caused by splitting vlan_macip field. This is
done by providing a single uint16_t value to allow writing/clearing
the l2 and l3 lengths together. There is still a small perf hit to the
slow path TX due to the reads from vlan_tci and l2/l3 lengths being
separated. (<5% in my tests with testpmd with no extra params).
Unfortunately, this cannot be eliminated, without restoring the vlan
tags and l2/l3 lengths as a combined 32-bit field. This would prevent
us from ever looking to move those fields about and is an artificial tie
that applies only for performance in igb and ixgbe drivers. Therefore,
this patch keeps the vlan_tci field separate from the lengths as the
best solution going forward.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In some cases we may want to tag a packet for a particular destination
or output port, so rename the "in_port" field in the mbuf to just "port"
so that it can be re-used for this purpose if an application needs it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.
Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The initial role of rte_ctrlmbuf is to carry generic messages (data
pointer + data length) but it's not used by the DPDK or it applications.
Keeping it implies:
- loosing 1 byte in the rte_mbuf structure
- having some dead code rte_mbuf.[ch]
This patch removes this feature. Thanks to it, it is now possible to
simplify the rte_mbuf structure by merging the rte_pktmbuf structure
in it. This is done in next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
* Updated patch to HEAD.
* Modified patch to retain the old function names for ctrl mbufs as
macros. This helps with app compatibility, and allows the concept
of a control mbuf to be reintroduced via a single-bit flag in
a future change.
* Updated the packet framework ip_pipeline example application to
work following this change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
IPv6 will run NDP with multicast packets, but multicast packets will be
filtered by i40e driver by default. So we need to enable multicast when
promiscuous mode is on, or IPv6 will fail.
Signed-off-by: Ding Heng <hengx.ding@intel.com>
Reviewed-by: Helin Zhang <helin.zhang@intel.com>
i40e was failing to run in XEN domain0, as the physical
memory for adminq DMA should be allocated and translated
in a different way for XEN domain0. So
rte_memzone_reserve_bounded() should be used for DMA
memory allocation, and rte_mem_phy2mch() should be used
for DMA memory address translation to support running
i40e PMD in XEN domain0.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Hardware specification changed recently which requires to set
or clear TX queue disable flags before actually enabling or
disabling a specific TX queue. 'QTX_HEAD' register needs to
be cleared before setting the QENA_REQ flag.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
i40e_clear_hw() was provided recently in shared code (base driver)
to clear hardware, which can cover disabling all queues.
The code changes are to remove i40e_pf_disable_all_queues() and use
i40e_clear_hw() instead.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.
Leave the tests for the deprecated function in place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Mark the rte_log, cmdline_printf and rte_snprintf functions as
being printf-style functions. This causes compilation errors
due to mis-matched parameter types, so the parameter types are
fixed where appropriate.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There is a warning in base driver (shared code) on 32-bits RHEL6.3/6.5:
lib/librte_pmd_i40e/i40e/i40e_lan_hmc.c:917:
error: integer constant is too large for ‘long’ type
As we don't modify base driver, this warning must be ignored.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Intel PMDs are built on top of the base drivers which are provided by Intel
and shouldn't be modified to allow easy batch upgrade from Intel.
The base driver is a "shared code" between many projects. But in DPDK,
the "base driver" naming makes more sense.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
For NVM4.2.2 or after, the firmware has the correct configurations
and load the macvlan filter as expected. It is not needed to
Update the default macvlan filter which cannot be removed at
all during initialization.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Double vlan should be specifically disabled by default during
port initialization which is expected.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
The bit shifting were written wrongly in '0x1 < j',
the correct one should be '0x1 << j'.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
It wrongly gets the RSS hash result from the RX descriptor which
has been modified for receiving new packet. The fix is to get the
RSS hash result from the buffer which saves the RX descriptor.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
