Add a condition to check if octeontx drivers are disabled.
octeontx drivers are built only if dependent drivers i.e.
ethdev, mempool and common/octeontx are enabled.
Bugzilla ID: 387
Fixes: 7f615033d64f ("drivers/net: build Cavium NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Amit Gupta <agupta3@marvell.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Sync mail box data structures to version 0x0005 to
that of kernel AF driver.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The assert checks is not necessary, the gso_ctx is always non-NULL.
Fixes: 050316a88313 ("net/tap: support TSO (TCP Segment Offload)")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Check that unknown unicast and unknown multicast filters are
applied and return an error if they are not applied. The error
is used in promiscuous and all multicast mode enable and disable
callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Unknown unicast filter creation may fail because of insufficient
permissions on VF. This failure is handled internally in libefx MAC
reconfiguration without any way for a user to know if it happened.
Making the MAC reconfiguration forward error code of filter
reconfiguration would be too destructive to the existing code
that may rely on the function never returning that error.
Add an API for getting the status of current unknown unicast and
all multicast filters since user must know that requested
filters are actually applied.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Refactor the multicast filter reconfiguration stage of the reconfigure
function to make it clearer and allow for more convenient further
changes.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Refactor the unicast filter reconfiguration stage of the reconfigure
function to make it clearer and allow for more convenient further
changes.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Refactor the filters mark stage of the reconfigure function
to make it clearer and allow for more convenient further changes.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Refactor the filters cleanup stage of the reconfigure function
to make it clearer and allow for more convenient further changes.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The driver wrongly assumed the presence of at least one rxmac in every
firmware and accessed to non-existing unit
Signed-off-by: Martin Spinler <spinler@cesnet.cz>
Acked-by: Jakub Neruda <neruda@netcope.com>
(Picked up from @Charles Myers patch
https://patchwork.dpdk.org/patch/57771/)
When the mtu_set() function is not implemented, rte_eth_dev_set_mtu()
fails with -ENOTSUP and mtu is not stored in the mtu field in the
rte_eth_dev_data. This causes the mtu in Vmxnet3_MiscConf which is
shared with hypervisor to always be set to 1500.
This may cause issues receiving jumbo frames on Enhanced Data Path
N-VDS.
Signed-off-by: Eduard Serra <eserra@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Due to the restriction of the flag I40E_FLAG_VF_MAC_BY_PF,
VF cannot program the MAC address.
In order to solve this inflexibility, the use of I40E_FLAG_VF_MAC_BY_PF
has been deleted in the code implementation to ensure that
VF can flexibly program the MAC address.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The ice_memdup doesn't check the new allocated memory pointer, it calls
the rte_memcpy directly. It should check it.
Fixes: 5f0978e96220 ("net/ice/base: add OS specific implementation")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove vector path feature list, if a feature only be supported
in non-vector path, use "P" to represent.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add support for PFCP, L2TP, ESP and AH RSS enabling.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Take network order for gtpu fdir filter.
Fixes: b5c274f4e2ad ("net/ice/base: support FDIR for GTPU QFI field")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Change ice_set_fd_desc_val to static, since it only be used
internally.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch add support switch rule for PFCP and NAT-T
packet base on profile rule, PFCP and NAT-T packet will not
be matched on any packet fields, but instead matches
the profile that the packet hits in the switch block.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Move some macro from ice_switch.c to ice_switch.h. Currently this
is only required by kernel driver, DPDK just to sync the code.
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
ICE_BLK_FD and ICE_BLK_RSS are executing the same code so group the case
statements together instead of duplicating code for each block.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
A race condition between FW and SW can occur between admin queue setup
and the first command sent. A link event may occur and FW attempts to
notify a non-existent queue. FW will set the critical error bit and
disable the queue. When this happens retry queue setup.
Signed-off-by: Evan Swanson <evan.swanson@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
A GTPU header can stack with a extend header or not, while
current implementation does not allow HDR bit sets like below:
ICE_FLOW_SEG_HDR_GTPU_IP | ICE_FLOW_SEG_HDR_GTPU_EH
ICE_FLOW_SEG_HDR_GTPU_IP | ICE_FLOW_SEG_HDR_GTPU_UP
ICE_FLOW_SEG_HDR_GTPU_IP | ICE_FLOW_SEG_HDR_GTPU_DWN
Which is not convenient for upper layer flow parser to
generate correct HDR bit.
but it could be if we have below assumptions:
ICE_FLOW_SEG_HDR_GTPU_DWN -- for GTPU with extend header down link
ICE_FLOW_SEG_HDR_GTPU_UP -- for GTPU with extend header up link
ICE_FLOW_SEG_HDR_GTPU_EH -- for GTPU with any extend header
ICE_FLOW_SEG_HDR_GTPU_IP -- for any GTPU header, but when it combined
with any above it downgrade to a dummy one.
And handle from specific case to generic case will hit all the cases
as expected.
if else (hdr & ICE_FLOW_SEG_HDR_GTPU_DWN) {
...
} else if (hdr & ICE_FLOW_SEG_HDR_GTPU_UP) {
...
} else if (hdr & ICE_FLOW_SEG_HDR_GTPU_EH) {
...
} else if (hdr & ICE_FLOW_SEG_HDR_GTPU_IP {
...
}
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Switch rules usually match packet fields to take actions. Add capability
to add a switch rule that does not match any packet fields, but instead
matches the profile that the packet hits in the switch block.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Added new value for cmd_flag:
Persistently set the DCB configuration mode for the current port.
Added new value for valid_flags: represent bit#1 of command flag
Signed-off-by: Sharon Haroni <sharon.haroni@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add new API function to allow user to choose port
on which mac vlan rule going to be added.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
We will remove the logic of configuring the flow control out of the
ice_set_fc(...) function. The goal is to enable any driver to combine
all PHY related flow logic, without repeatedly call ice_aq_set_phy_cfg.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
In order to support switch rule for ethertype filter
with ipv6 ethertype id, it has to check ethertype
then find a proper dummy packet.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
When setting the PHY cfg (CQ cmd 0x0601), if the firmware responds
with an EMODE error, software will ignore the error as it simply
means that manageability (ex: BMC) is in control of the link and that
the new setting may not be applied.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The scope of these variables can be reduced, so do so. This also
eliminates the need for the extra wrapping/braces.
Also, compact a line since it can fit within 80 columns
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add macro for FDID priority 0 and 3, also adjust the
fdid_prio position to sync with kernel driver.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The Hw counters is defined as 32bit unsigned value and read from
the sysfs. Firstly read the base value while application start,
then fetch the new value while do query and minus the base value.
If the new value is less than base value, will result in a
negative value and convert to the big value as unsigned 64bit.
PMD add xstats field to store the last successfully read counter,
use it if failed to read hw counter from sysfs.
PMD also record the last output value to handle the wrap around case,
if overflow happened, increase the wrap count by 1 and save into the
higher 32bit, and update the new value into lower 32bit, finally
return the 64bit counter value.
Fixes: ce9494d76c47 ("net/mlx5: report imissed statistics")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
When creating a hairpin queue, the total data size and the maximal
number of packets are interrelated. The differ is the stride size.
Larger buffer size means big packet like jumbo could be supported,
but in the meanwhile, it will introduce more cache misses and have a
side effect on the performance.
Now a new device parameter "hp_buf_log_sz" is introduced for
applications to set the total data buffer size (the logarithm value).
Then the maximal number of packets will also be calculated
automatically by this value.
Applications could also change this value to a larger one in order
to support larger packets in hairpin case. A smaller value will be
beneficial for memory consumption.
If it is not set, the default value will be used.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The PMD static logtype is original DPDK legacy and should not be used.
Fixes: 43362c6a7647 ("net/thunderx: support RSS and RETA query and update")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The static PMD logtype should not be used by drivers.
Instead, use existing log macros in this driver.
Also use standard rte_ether routine to format ether address.
Fixes: 37f9b54bd3cf ("net/dpaa: support Tx and Rx queue setup")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The PMD logtype is a legacy from original DPDK logging.
All drivers must use their own dynamic log type.
Fixes: b1bc1afa4a0e ("net/pfe: support dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The PMD logtype is legacy and drivers should use their own logtype.
Fixes: 050316a88313 ("net/tap: support TSO (TCP Segment Offload)")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Virtio driver has its own logtype and should not use legacy
PMD logtype.
Fixes: 32c118fd0059 ("virtio: free mbuf's with threshold")
Fixes: e5f456a98d3c ("net/virtio: support in-order Rx and Tx")
Fixes: 1c8489da561b ("net/virtio-user: fix multi-process support")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The PMD logtype is legacy and should not be used.
Fixes: 3378383dceab ("net/mvneta: support statistics reset")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
To match the pools/queues configuration, the pools/queues output
should start from VMDQ base queue. This patch fixed the issue.
Fixes: 6bb97df521aa ("examples/vmdq: new app")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
For DCF, flow ops may be executed in different threads,
so an thread safe option for generic flow APIs is needed.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add a new ops "redirect" to flow engine, it's used to implement the
function that redirect a flow's destination. Currently only support
VSI-Redirect which will be used by DCF for handling VF-VSI mapping
table change.
A new API "ice_flow_redirect" is exposed, current usage is: it could
be called when there's VF-VSI mapping table change caused by VF reset.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
In function mlx5_devx_cmd_create_tir(), the 40 bytes of RSS key are
copied in 10 iterations, 4 bytes each time using the MLX5_SET macro.
As result the RSS key is copied into TIR context in swapped byte order.
This patch fixes the issue, using memcpy() to copy the RSS key as is.
The struct member mlx5_devx_tir_attr.rx_hash_toeplitz_key is updated
to byte array type.
Fixes: c3aea272eed8 ("net/mlx5: create advanced Rx object via DevX")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
By default, flows are categorized into two types of a mlx5 device.
1. The PMD driver will create some default flows to enable the
traffic and give some default behaviors on the packets. And
this is transparent to the upper layer application.
2. Other flows will be created in the application based on its
needs.
When in the old cached mode for application flows, it is allowed
to created the flow before the device is started. And when
starting the device, all the flows will be applied to the hardware
and take effect. The cached flows will be also applied in the same
time.
In non-cached mode, all the flows will never be cached when stopping
a device. So it makes no sense to insert any flow into the device
before it is started. Default flows owned by PMD driver are not
affected in this case.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Only the members of flow handle structure will be used when trying
to destroy a flow. Other members of mlx5 device flow resource will
only be used for flow creating, and they could be reused for different
flows.
So only the device flow handle structure needs to be saved for further
usage. This could be separated from the whole mlx5 device flow and
stored with a list for each rte flow.
Other members will be pre-allocated with an array, and an index will
be used to help to apply each device flow to the hardware.
The flow handle sizes of Verbs and DV mode will be different, and
some calculation could be done before allocating a verbs handle.
Then the total memory consumption will less for Verbs when there is
no inbox driver being used.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Common structures used for mlx5 flow creating and destroying are
reorganized in order to separating the parts only for destroying
from all the items.
The "mlx5_flow" will contain the common items of DV and Verbs flow,
specific items for DV / Verbs only. These items will only be used
when creating a flow.
At the end of "mlx5_flow", a nested structure "mlx5_flow_handle"
located. It contains all the items used both for creating and
destroying a flow. Also, it consists of common items, and DV / Verbs
specific items.
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
