Use stdbool.h instead of defining the bool type, to make
sure the virtchnnl msg format definition is the same
between PF and VF.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds extended processing of DDP packages:
- Execution of adminq command sections to support AQ-depended profiles,
for example, for programming cloud filters types.
- Ability to write a profile without registering it in the list of
applied profiles, to be used for AQ-depended profiles.
- Profile rollback is implemented to support restoration of original
parser/analyzer configuration without the need of core reset,
for example, for deploying new profile without resetting device.
- Search for a specific section in a profile, to be used by driver
to access metadata sections with description of PCTYPE/PTYPEs
defined in the profile.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch allows detection of upcoming core reset in case NIC gets
stuck while performing FLR reset. The i40e_pf_reset() function returns
I40E_ERR_NOT_READY when global reset was detected.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Instead of accessing register directly, use newly added AQC in
order to blink LEDs. Introduce and utilize a new flag to prevent
excessive API version checking.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Adds double VLAN tagging ethertype fields to Set Switch Parameters AQ
command. These were added in firmware API 1.7.
Callers of i40e_aq_set_switch_config() can specify the ethertypes to
use by filling out the corresponding fields in struct i40e_hw.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds new phy types for 25G Active Optical Cables (AOC) and
Active Copper Cables (ACC) support.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Store information about FEC modes, that were requested. It will be used
in printing link status information function and this way there is no
need to call admin queue there.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
During NVMupdate, state machine gets into unrecoverable state because
i40e_clean_adminq_subtask can get scheduled after the admin queue
command but before other state variables are updated.
This patch adds locking around admin queue command and update of
state variables so that adminq_subtask will have accurate information
whenever it gets scheduled.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Modify the necessary files to be compatible with the new virtchnl.h file
instead of relying on i40e_virtchnl.h variant. This mostly changes
references to VIRTCHNL_ variables by removing prefix of I40E_.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Unfortunately the datasheet has a mistake. The
address of the TX error counter is wrong.
Fixes: 8db9e2a1b232 ("i40e: base driver")
CC: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add new admin queue function and extended fields for cloud filter:
- Add admin queue function for Replace filter command (Opcode: 0x025F)
- Define big buffer for extended general fields in Add/Remove
Cloud filters command
Signed-off-by: Laura Stroe <laura.stroe@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds:
- ENCAP offload negotiation flag. Use the existing ENCAP_CSUM offload
flag to negotiate GSO_UDP_TUNNEL_CSUM capability and create new ENCAP
flag for negotiating offloads for encapsulated packets
- RX_ENCAP_CSUM offload negotiation flag for VF to negotiate RX
checksum capability for tunnelled packet types.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
When sending an adminq command, we wait for the command to complete in
a loop. This loop waits for an entire millisecond, when in practice the
adminq command is processed often much faster.
Change the loop to use i40e_usec_delay instead, and wait for 50 usecs
each time instead. This appears to be about the minimum time required,
based on some manual observation and testing.
The primary benefit of this change is reducing latency of various
operations in the PF driver, especially when related to having a large
number of VFs enabled.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This is fix for klocwork issue where dcbcfg->numapps could
be greater than size of array (i.e dcbcfg->app[I40E_DCBX_MAX_APPS]).
The fix makes sure the array is not accessed past size of array
(i.e. I40E_DCBX_MAX_APPS).
Fixes: 166dceeeeafc ("i40e/base: add parsing for CEE DCBX TLVs")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
The X722 doesn't support the AQ command to read/write the control
register so enable it to bypass the check and use the direct read/write
method.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
On X722, we can control whether or not the hardware performs ATR
eviction. Define the correct bit so we can twiddle it.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Big Endian platform will accidentally send the wrong
data to the firmware command. This patch fixes the issue.
Fixes: 788fc17b2dec ("i40e/base: support proxy config for X722")
Fixes: 3c89193a36fd ("i40e/base: support WOL config for X722")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
For some cases when reading from device are incorrect or image is
incorrect, this part of code causes crash due to division by zero.
Fixes: 8db9e2a1b232 ("i40e: base driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Add a new adminq function that allows driver to configure per-VLAN
broadcast promiscuous mode, similar to how we handle unicast and
multicast promiscuous modes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds I40E_NVMUPD_STATE_ERROR state for NVM update.
Without this patch driver has no possibility to return NVM image write
failure.This state is being set when ARQ rises error.
arq_last_status is also updated every time when ARQ event comes,
not only on error cases.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
We already define I40E_AQ_PHY_TYPE_EXT_25G* flags in the response adminq
structure above, and do not need to re-define these.
While we are here, replace 0X with 0x as normal style.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
The firmware expects the Port number to be in Little Endian format, and
the i40e_aq_add_udp_tunnel command clearly expects the udp_port variable
to be in Host order, as it uses CPU_TO_LE16(). It was recently
discovered in the Linux driver that we were passing a Big Endian port
number, which was therefor not enabling the UDP tunnel correctly.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acquire NVM lock before reads on all devices. Previously, locks were
only used for X722 and later. Fixes an issue where simultaneous X710
NVM accesses were interfering with each other.
Fixes: 8db9e2a1b232 ("i40e: base driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
By default the device clears all MAC filter information on PF Reset.
However, this will cause Wake-On-LAN to fail because the wake filters
are deleted on transition to D3 power state. To get around this,
firmware is adding functionality to preserve certain MAC filters during
PFR. These bits allow the driver tell the FW which filters to preserve.
Set the datalen field and add I40E_AQ_FLAG_BUF/I40E_AQ_FLAG_RD flags in the
desc struct for the WoL/Proxy AQ descriptors. The WoL/Proxy AQ commands
were failing because these were missing.
Fixes: 3c89193a36fd ("i40e/base: support WOL config for X722")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch implements a function to set a VSI to broadcast, multicast, and
unicast promiscuous mode all at once. This is specifically needed to set
the WoL/Proxy VSI created by FW to full promiscuous mode during power down
for WoL patterns and protocol offloads to function properly.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch implements the clear Wake on LAN (WoL) filters admin queue
function which clears out ALL WoL patterns programmed into
the flex filters.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Define the values for the 25G PHY type bit-fields that match
reported values from firmware. There was a gap in the bit
fields but no corresponding gap i40e_aq_phy_type enum.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Add FEC bits to the PHY capabilities AQ command struct. This is required
for 25GbE support. Change the name of the generic mod_type_ext field to
indicate that it is now used for handling FEC.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Microsoft recently removed the requirement for VFs to use the VMBus.
The Fort Park Windows VF has been changed to use only the hardware
mailbox, so the Hyper-V VF device ID can be removed.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
I40E_MAC_X710 was supposed to be for 10G and I40E_MAC_XL710
was supposed to be for 40G. But i40e_set_mac_type() sets
I40E_MAC_XL710 for all device IDS. I40E_MAC_X710 is not
used at all. Thus deprecating this extra macro.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
The PHY type value for unrecognized PHYs and cables was changed
based on firmware version number. Newer hardware use lower firmware
version numbers and this was causing some PHYs to be identified
as type 0x16 instead of 0xe (unknown).
Without this patch, newer card will incorrectly identify unknown
PHYs and cables.
This change adds hardware type to the check for firmware version
so the PHY type is reported correctly.
Fixes: 8db9e2a1b232 ("i40e: base driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Currently i40e_bus_info has PCI device and function info only. However
in log messages slot number (i.e hw->bus.device) is being printed
as bus number. Another field should be added to provide bus number
info and preserve existing information.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
