The term slave is only used in some comments and can be
replaced with sub devices, as done elsewhere.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_stop() return value was changed from void to int,
so this patch modify usage of this function across net/failsafe
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The API function rte_eth_dev_close() was returning void.
The return type is changed to int for notifying of errors.
If an error happens during a close operation,
the status of the port is undefined,
a maximum of resources having been freed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
During a hotplug attempt, failsafe will try to bring a subdevice that
just appeared to its internal state. On error, the subdevice is marked
for removal and will be cleaned up.
However failsafe_dev_remove() only remove active devices. Devices that
failed during probe will be stuck in DEV_PARSED state repeatedly.
Consider all devices when doing a removal round, but limit burst control
and stats saving to active devices.
Fixes: 598fb8aec6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <grive@u256.net>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The flag RTE_ETH_DEV_CLOSE_REMOVE is set so all port resources
can be freed by rte_eth_dev_close().
Freeing of private port resources is moved
from the ".remove(device)" to the ".dev_close(port)" operation.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Failsafe driver has been indicating zero for RSS redirection table size
after device info reporting had been reworked. Report proper value.
Fixes: 4586be3743 ("net/failsafe: fix reported device info")
Cc: stable@dpdk.org
Signed-off-by: Ian Dolzhansky <ian.dolzhansky@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <grive@u256.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Some PMD do not respect the eth_dev API when allocating their
rte_eth_dev. As a result, on device add event resulting from
rte_eth_dev_probing_finish() call, the eth_dev processed is incomplete.
The segfault is a good way to focus the developer on the issue, but does
not inspire confidence. Instead, warn the user of the error repeatedly.
The failsafe PMD can warn of the issue and continue. It will repeatedly
attempt to initialize the failed port and complain about it, which
should result in the same developer focus but with less crashing.
Signed-off-by: Gaetan Rivet <grive@u256.net>
Zero is a valid fd. The fd won't be closed thus leading fd leak,
when it is zero.
Also the service proxy is initialized at 0. This is assuming that all of
its fields are invalid at 0. The issue is that a file descriptor at 0 is
a valid one.
The value -1 is used as sentinel during cleanup. Initialize the RX proxy
file descriptor to -1.
Fixes: f234e5bd99 ("net/failsafe: register slaves Rx interrupts")
Fixes: 9e0360aebf ("net/failsafe: register as Rx interrupt mode")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Gaetan Rivet <grive@u256.net>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
The header file rte_config.h is always included by make or meson.
If required in an exported API header file, it must be included
in the public header file for external applications.
In the internal files, explicit include of rte_config.h is useless,
and can be removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Some of the internal header files have 'rte_' prefix
and some don't.
Remove 'rte_' prefix from all internal header files.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/failsafe according to new return type.
Try to keep all-multicast mode consistent across all active
devices in the case of failure.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/failsafe according to new return type.
Try to keep promiscuous mode consistent across all active
devices in the case of failure.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
net/failsafe according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
When secondary process is run was noticing that the log always
contained complaints about unable to parse devargs.
It turns out that an empty devargs turns into "" and this
value is not parsable. Change the failsafe secondary to just
skip doing devargs if it empty.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Use rte_ether_unformat_addr rather than sscanf.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
According to API, 'rte_dev_probe()' and 'rte_dev_remove()' must
return 0 or negative error code. Bus code returns positive values
if device wasn't recognized by any driver, so the result of
'bus->plug/unplug()' must be converted. 'local_dev_probe()' and
'local_dev_remove()' also has their internal API, so the conversion
should be done there.
Positive on remove means that device not found by driver.
Positive on probe means that there are no suitable buses/drivers,
i.e. device is not supported.
Users of these API fixed to provide a good example by respecting
DPDK API. This also will allow to catch such issues in the future.
Fixes: a3ee360f44 ("eal: add hotplug add/remove device")
Fixes: 244d513071 ("eal: enable hotplug on multi-process")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The failsafe driver device info had several issues in the
info it reported in dev_info_get:
- it cleared dev_info->device set in rte_eth_dev_info_get
- many fields (for example max_rx_queue) should be the minimum
of all sub devices
- it reported tx capa for the active transmit device, but
the device may change.
There was enough messed up that ended up reworking the info_get
handler. There is no need to save current values or have a
template for defaults.
Fixes: 4e31ee26ed ("net/failsafe: report actual device capabilities")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When passed to the application, Rx packets retain the port ID value
originally set by slave devices. Unfortunately these IDs have no
meaning to applications, which are typically unaware of their existence.
This confuses those caring about the source port field in mbufs
(m->port) which experience issues ranging from traffic drop to crashes.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add implementation for probe in secondary.
Failsafe will attempt to attach all the sub-devices in
secondary process.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
In multiprocess context, the pointer to sub-device is shared between
processes. Previously, it was a pointer to per process eth_dev so
it's needed to replace this dependency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
In multiprocess context, the sub-device structure is shared
between processes. The reference to the failsafe device was
a per process pointer. It's changed to port id which is the
same for all processes.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
In multiprocess context, the private structure is shared between
processes. The back reference from private to generic data was using
a pointer to a per process eth_dev. It's now changed to a reference of
the shared data.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
