Following commands of syn filter are removed:
- add_syn_filter (port_id) priority (high|low) queue (queue_id)
- remove_syn_filter (port_id)
- get_syn_filter (port_id)
New command is added for syn filter by using filter_ctrl API and new
syn filter structure:
- syn_filter (port_id) (add|del) priority (high|low) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch defines new functions dealing with syn filter.
It removes old functions which deal with syn filter.
Syn filter is dealt with through entrance ixgbe_dev_filter_ctrl.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch defines new functions dealing with syn filter.
It removes old functions of syn filter in igb driver.
Syn filter is dealt with through entrance eth_igb_filter_ctrl.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Structure rte_flex_filter is removed.
Following APIs are removed:
- rte_eth_dev_add_flex_filter
- rte_eth_dev_remove_flex_filter
- rte_eth_dev_get_flex_filter
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove also from version map]
Following commands of flex filter are removed:
- add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
priority (prio_value) queue (queue_id)
- remove_flex_filter (port_id) index (idx)
- get_flex_filter (port_id) index (idx)
New command is added for flex filter by using filter_ctrl API and new flex filter structure:
- flex_filter (port_id) (add|del) len (len_value) bytes (bytes_value) mask (mask_value)
priority (prio_value) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch defines new functions dealing with flex filter.
It removes old functions of flex filter in igb driver.
Syn filter is dealt with through entrance eth_igb_filter_ctrl.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch sets the default value of flow director's mask.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch implement RTE_ETH_FILTER_FLUSH operation to delete all
flow director filters in ixgbe driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch changes the get info operation to be implemented through
filter_ctrl API and RTE_ETH_FILTER_INFO/RTE_ETH_FILTER_STATS ops.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch implement the mask configuration of flow director filter,
by using the mask defined in rte_fdir_conf instead of callback function
fdir_set_masks.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch removes the flexbytes_offset from rte_fdir_conf, because
the flexible payload setting is done by flex_conf instead of flexbytes_offset.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch implement the flexpayload configuration of flow director filter.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds RTE_ETH_FLOW_TYPE_RAW and RTE_ETH_RAW_PAYLOAD to support the
flexible payload is started from the beginning of the packet.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch changes the add/delete/update operations to be implemented through
filter_ctrl API and RTE_ETH_FILTER_ADD/RTE_ETH_FILTER_DELETE/RTE_ETH_FILTER_UPDATE ops.
It also removes the callback functions:
- ixgbe_eth_dev_ops.fdir_add_signature_filter
- ixgbe_eth_dev_ops.fdir_update_signature_filter
- ixgbe_eth_dev_ops.fdir_remove_signature_filter
- ixgbe_eth_dev_ops.fdir_add_perfect_filter
- ixgbe_eth_dev_ops.fdir_update_perfect_filter
- ixgbe_eth_dev_ops.fdir_remove_perfect_filter
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add uio_pci_generic to the list of supported kernel drivers.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Tested-by: Qun Wan <qun.wan@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
enable/disable interrupt by manipulating a control bit of command
register on NIC's PCIe configuration space.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Tested-by: Qun Wan <qun.wan@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Change the EAL PCI code so that it can work with both the
uio_pci_generic in-tree driver, as well as the igb_uio
DPDK-specific driver.
This involves changes to
1) Modify method of retrieving BAR resource mapping information
2) Mapping using resource files in /sys rather than /dev/uio*
2) Setup bus master bit in NIC's PCIe configuration space for
uio_pci_generic.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Added 4 unit tests checking link bonding mode 6 behavior.
Also modified virtual_pmd so it is possible to provide packets,
that should be received with rx_burst and to inspect packets
transmitted by tx_burst.
In packet_burst_generator.c function creating eth_header is
modified, so it accepts ether_type as a parameter and function
creating arp_header is added. Updated other unit tests to get
rid of compilation errors.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch modify mode older name from
BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING to BONDING_MODE_TLB
This patch also changes order of TEST_ASSERT macro in
test_tlb_verify_slave_link_status_change_failover.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch contains an example for link bonding mode 6.
It interact with user by a command prompt. Available commands are:
Start - starts ARP_thread which respond to ARP_requests and sends
ARP_updates (this
Is enabled by default after startup),
Stop -stops ARP_thread,
Send count ip - send count ARP requests for IP,
Show - prints basic bond information, like IPv4 statistics from clients
Help,
Quit.
The best way to test mode 6 is to use this example together with
previous patch:
[PATCH 3/4] bond: add debug info for mode 6 link bonding.
Connect clients thru switch to bonding machine and send:
arping -c 1 bond_ip or
generate IPv4 traffic to bond_ip (IPv4 traffic from different clients
should be then balanced on slaves in round robin manner).
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch add some debug information when using link bonding mode 6.
It prints basic information about ARP packets on RX and TX (MAC, ip,
packet number, arp packet type).
If CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB == y.
If CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1 is enabled instead of previous
one, use show command to see IPv4 balancing from clients.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This mode includes adaptive TLB and receive load balancing (RLB). In RLB
the bonding driver intercepts ARP replies send by local system and
overwrites its source MAC address, so that different peers send data to
the server on different slave interfaces. When local system sends ARP
request, it saves IP information from it. When ARP reply from that peer
is received, its MAC is stored, one of slave MACs assigned and ARP reply
send to that peer.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Changed MAC address type from uint8_t[6] to struct ether_addr and IP
address type from uint8_t[4] to uint32_t to make it consistent with
other DPDK code using MAC and IP addresses. It allows us to use
is_same_ether_addr and ether_addr_copy functions on MAC addresses in ARP header. Also
removed union from arp_hdr struct to make calls to arp_data items
shorter. Updated test-pmd to match new arp_hdr version.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
[Thomas: doxygenize comments]
Remove those hotspots which is unnecessary when early returning occurs.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Make virtio not require UIO for some security reasons, this is to match
6WIND's virtio-net-pmd.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
This makes virtio driver work like ixgbe. Transmit buffers are
held until a transmit threshold is reached. The previous behavior
was to hold mbuf's until the ring entry was reused which caused
more memory usage than needed.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Need to have do special things to set default mac address.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Change order of initialization to match Linux kernel.
Don't blow away control queue by doing reset when stopped.
Calling dev_stop then dev_start would not work.
Dev_stop was calling virtio reset and that would clear all queues
and clear all feature negotiation.
Resolved by only doing reset on device removal.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Support turn on/off RX VLAN strip on host, this let guest get the chance of
using its software VLAN strip functionality.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Check if it has already been vlan-tagged packet, if true, avoid inserting a
duplicated vlan tag into it.
This is a possible case when guest has the capability of inserting vlan tag.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
To keep the consistent logic with normal Rx path, the mergeable
Rx path also needs software vlan strip/decap if it is enabled.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Implement VLAN stripping in software. This allows application
to be device independent.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
It is helpful to allow device drivers that don't support hardware
VLAN stripping to emulate this in software. This allows application
to be device independent.
Avoid discarding shared mbufs. Make a copy in rte_vlan_insert() of any
packet to be tagged that has a reference count > 1.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Since vq_alignment is constant (always 4K), it does not
need to be part of the vring struct.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Virtio has link state interrupt which can be used.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Starting driver with link down should be ok, it is with every
other driver. So just allow it.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Updating the vring descriptor index should be done before notifying host;
Remove 2 duplicated store memory barriers in both Rx and Tx path because there is
store memory barrier in vq_update_avail_idx function;
Notify the host only if packets actually transmitted(nb_tx > 0).
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
The DPDK driver only has to deal with the case of running on PCI
and with SMP. In this case, the code can use the weaker barriers
instead of using hard (fence) barriers. This will help performance.
The rationale is explained in Linux kernel virtio_ring.h.
To make it clearer that this is a virtio thing and not some generic
barrier, prefix the barrier calls with virtio_.
Add missing (and needed) barrier between updating ring data
structure and notifying host.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Better to check at compile time than fail at runtime.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Make vtpci_get_status a local function as it is used in one file.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
For clarity make the setup of PCI resources for Linux into a function rather
than block of code #ifdef'd in middle of dev_init.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
