Since rte_intr_enable is called at init and start time. Remove it in
interrupt_action function to avoid too many system calls.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There is a new set of TR bits that can be used when replacing
the cloud filters so add them in. Also added a check to make
sure that the replace cloud filters AQ command doesn't get
executed on an X722 since it is not supported there.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add HW capability flag to indicate that firmware supports stopping
LLDP agent. This feature has been added in FW API 1.7 for XL710
devices and 1.6 for X722. Also raise expected minor version number
for X722 FW API to 6.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
These two functions are currently only used in the LED get/set
functions, which are not apart of the VF driver. So the
i40e_aq_set/get_phy_register functions should be wrapped so they
can be removed from the VF driver.
This was brought up in the Linux community that these functions in
the VF driver had no callers in the tree, so they should be removed.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Carlsville Device use 10GBASE-T/1GBASE-T PHY with additional support
for 5GBASE-T/2.5GBASE-T.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds the default value for Flow Control Refresh Threshold
to set_mac_config AdminQ command. Previously, calling this AdminQ
command would overwrite the default value with 0.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
During switching between old NVM structure approach (called
structured NVM) to new one (called flat NVM) or backward flash
needs to be rearranged to required NVM structure.
This is a part of transition from one NVM structure to another.
The function is introduced to command firmware to start
rearrangement process.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Firmware can return a busy state, so the i40e_asq_send_command will
return I40E_ERR_NOT_READY.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new field - command flags with only one flag for now. Added flag
tells FW that it shouldn't change page while accessing QSFP module,
as it was set manually.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The wait time for Global Reset Ready steady state is calculated based on
the GLGEN_RSTCTL.GRSTDEL value. However, current impelementation multiplied
that value by 20 as a workaround for an issue in SOC platforms.
This resulted in the maximum GLGEN_RSTCTL.GRSTDEL timeout of 6.5 seconds
becoming 130 seconds, which is so long that the VMkernel watchdog thinks
the kernel is frozen and triggers a PSOD.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Allocated resources were not freed in the event of failure in
i40e_init_asq function. This patch gracefully handles all failures.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Allocated resources were not freed in the event of a failure in
i40e_init_lan_hmc function. This patch gracefully handles the fail
case after initializing the lan hmc.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The NVM is in little endian so when we read from it we need to do
the correct thing for the endianness of the machine.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch fixes the polling mechanism of GLGEN_RSTAT.DEVSTATE
in the PF Reset path when Global Reset is in progress.
While the driver is polling for the end of the PF Reset and
the Global Reset is triggered, abandon the PF Reset path and
prepare for the upcoming Global Reset.
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch enables tc-flower based hardware offloads. tc flower
filter provided by the kernel is configured as driver specific
cloud filter. The patch implements functions and admin queue
commands needed to support cloud filters in the driver and
adds cloud filters to configure these tc-flower filters.
Also it cover below API renaming for code clean.
- i40e_aq_add_cloud_filters_big_buffer to
i40e_aq_add_cloud_filters_bb
- i40e_aq_remove_cloud_filters_big_buffer to
i40e_aq_rem_cloud_filters_bb
- i40e_aq_remove_cloud_filters to
i40e_aq_rem_cloud_filters
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new admin queue definitions and extended fields for cloud
filter support. Define big buffer for extended general fields
in Add/Remove Cloud filters command.
Also rename i40e_aqc_add_remove_cloud_filters_element_data to
i40e_aq__cloud_filters_element_data.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add definitions for L4 filters and switch modes based on cloud filters
modes and extend the set switch config command to include the additional
cloud filter mode.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch overwrites number of ports for X722 devices with support for
OCP PHY mezzanine. The old method with checking if port is disabled in
the PRTGEN_CNF register cannot be used in this case. When the OCP is
removed, ports were seen as disabled, which resulted in wrong calculation
of partition id, that caused WoL to be disabled on certain ports.
Fixes: 3c89193a36fd ("i40e/base: support WOL config for X722")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
We should not issue Admin Queue command before Admin Queue is initialized.
But this happened in i40e_hw_init and i40e_filter_input_set_init.
The patch fixes the issue by proper reordering.
Fixes: b6a0ec418274 ("i40e: use AQ for Rx control register read/write")
Cc: stable@dpdk.org
Reported-by: Anand Rawat <anand.rawat@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
All information about a device to probe can be grouped
in a common string, which is what we usually call devargs.
An application should not have to parse this string before
calling the EAL probe function.
And the syntax could evolve to be more complex and support
matching multiple devices in one string.
That's why the bus name and device name should be removed from
rte_eal_hotplug_add().
Instead of changing this function, a simpler one is added
and used in the old one, which may be deprecated later.
When removing a device, we already know its rte_device handle
which can be directly passed as parameter of rte_eal_hotplug_remove().
If the rte_device is not known, it can be retrieved with the devargs,
by iterating in the device list (future RTE_DEV_FOREACH()).
Similarly to the probing case, a new function is added
and used in the old one, which may be deprecated later.
The new function is used in failsafe, because the replacement is easy.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
These functions are quite old and are the only available replacement
for the deprecated attach/detach functions.
Note: some new functions may (again) replace these hotplug functions,
in future, with better parameters.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
When a device is added with a devargs (hotplug or whitelist),
the bus pointer can be retrieved via its devargs.
But there is no such devargs.bus in case of standard scan.
A pointer to the rte_bus handle is added to rte_device.
When a device is allocated (during a scan),
the pointer to its bus is assigned.
It will make possible to remove a rte_device,
using the function pointer from its bus.
The function rte_bus_find_by_device() becomes useless,
and may be removed later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The function rte_devargs_remove(), which is intended to be internal,
can take a devargs structure as argument.
The matching is still using string comparison of bus name and
device name.
It is simpler and may allow a different devargs matching in future.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
rte_eal_parse_devargs_str() does not support parsing the bus name
at the start of devargs. So it was renamed and deprecated.
rte_eal_devargs_add(), rte_eal_devargs_type_count() and
rte_eal_devargs_dump() were declared deprecated and had their
implementation body renamed.
All these functions were deprecated in release 18.05.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The enum names are *_params (plural form).
And the items are also using the plural form: *_PARAMS_*.
It looks more natural to use the singular form *_PARAM_* for items.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
We could match devices by their PCI id (vendor id, device id, etc).
But for now, only matching by PCI address is implemented.
The devargs parameter "id" is renamed "addr" to reflect its real meaning.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The experimental symbol check script matched on the regexes
"\.text.*$SYM" and "\.text\.experimental.*$SYM" which allows for
substring matches.
If a symbol is leading substring of another one (e.g. symbol foo
is a substring of symbol foobar), it would match on symbols
when it shouldn't.
It is fixed by matching additionally on the end of line
so that symbols are an exact match.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
This fixes the problem of reference count leak if
igbuio_pci_enable_interrupts fails.
Also, replace mutex and integer with a kernel atomic counter.
This is standard pattern for kernel devices.
Fixes: 19685d5aa79c ("igb_uio: allow multi-process access")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The final_va field is set during remap_segment() but this information is
not propagated to temporal copy of huge page memory configuration so the
unlink_hugepage_files() function wrongly assume that there is nothing to
unlink. Fix this issue by checking orig_va instead of final_va.
Fixes: 66cc45e293ed ("mem: replace memseg with memseg lists")
Cc: stable@dpdk.org
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, mempools can only be allocated either using native
DPDK memory, or anonymous memory. This patch will add two new
methods to allocate mempool using external memory (regular or
hugepage memory), and add documentation about it to testpmd
user guide.
It adds a new flag "--mp-alloc", with four possible values:
native (use regular DPDK allocator), anon (use anonymous
mempool), xmem (use externally allocated memory area), and
xmemhuge (use externally allocated hugepage memory area). Old
flag "--mp-anon" is kept for compatibility.
All external memory is allocated using the same external heap,
but each will allocate and add a new memory area.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add simple unit tests to test external memory support.
The tests are pretty basic and mostly consist of checking
if invalid API calls are handled correctly, plus a simple
allocation/deallocation test for malloc and memzone.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When adding or removing external memory from the memory map, there
may be actions that need to be taken on account of this memory (e.g.
DMA mapping). Add support for triggering callbacks when adding,
removing, attaching or detaching external memory.
Some memory event callback handlers will need additional logic to
handle external memory regions. For example, virtio callback has to
completely ignore externally allocated memory, because there is no
way to find file descriptors backing the memory address in a
generic fashion. All other callbacks have also been adjusted to
handle RTE_BAD_IOVA as IOVA address, as this is one of the expected
use cases for external memory support.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
In order to use external memory in multiple processes, we need to
attach to primary process's memseg lists, so add a new API to do
that. It is the responsibility of the user to ensure that memory
is accessible and that it has been previously added to the malloc
heap by another process.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add an API to remove memory from specified heaps. This will first
check if all elements within the region are free, and that the
region is the original region that was added to the heap (by
comparing its length to length of memory addressed by the
underlying memseg list).
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add an API to add externally allocated memory to malloc heap. The
memory will be stored in memseg lists like regular DPDK memory.
Multiple segments are allowed within a heap. If IOVA table is
not provided, IOVA addresses are filled in with RTE_BAD_IOVA.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add API to allow creating new malloc heaps. They will be created
with socket ID's going above RTE_MAX_NUMA_NODES, to avoid clashing
with internal heaps.
This breaks the ABI, so document the change.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
An API is needed to check whether a particular socket ID belongs
to an internal or external heap. Prime user of this would be
mempool allocator, because normal assumptions of IOVA
contiguousness in IOVA as VA mode do not hold in case of
externally allocated memory.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When we will be creating external heaps, they will have their own
"fake" socket ID, so add a function that will map the heap name
to its socket ID.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
We will need to refer to external heaps in some way. While we use
heap ID's internally, for external API use it has to be something
more user-friendly. So, we will be using a string to uniquely
identify a heap.
This breaks the ABI, so document the change.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
We will be assigning "invalid" socket ID's to external heap, and
malloc will now be able to verify if a supplied socket ID is in
fact a valid one, rendering parameter checks for sockets
obsolete.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
We will be assigning "invalid" socket ID's to external heap, and
malloc will now be able to verify if a supplied socket ID is in
fact a valid one, rendering parameter checks for sockets
obsolete.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
We will be assigning "invalid" socket ID's to external heap, and
malloc will now be able to verify if a supplied socket ID is in
fact a valid one, rendering parameter checks for sockets
obsolete.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
We will be assigning "invalid" socket ID's to external heap, and
malloc will now be able to verify if a supplied socket ID is in
fact a valid one, rendering parameter checks for sockets
obsolete.
This changes the semantics of what we understand by "socket ID",
so document the change in the release notes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Switch over all parts of EAL to use heap ID instead of NUMA node
ID to identify heaps. Heap ID for DPDK-internal heaps is NUMA
node's index within the detected NUMA node list. Heap ID for
external heaps will be order of their creation.
This breaks the ABI, so document the changes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
