17 Commits

Author SHA1 Message Date
Harry van Haaren
795618c0aa igbvf: fix statistic wraparound
Fix a misinterpreatation of VF statistic macro in e1000/igb.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Roger Melton <rmelton@cisco.com>
2015-10-28 14:41:11 +01:00
Wang Xiao W
4c8db5f09a igb: enable TSO support
This patch enables igb TSO feature, the feature works on both PF and VF.
The TCP segmentation offload needs to write the offload related information
into the advanced context descriptors, which is similar to checksum offload.

Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-10-27 19:28:06 +01:00
Harry van Haaren
67b38d93c9 e1000: fix total byte statistics
This patch fixes a bug in reading the 64 bit register reading
which was causing the total octets counters to show zero.
Now the code reads both the lower and higher 32 bits.
Tested in testpmd, byte values are correct.

Fixes: 805803445a02 ("e1000: support EM devices (also known as e1000/e1000e)")

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-10-27 18:39:44 +01:00
Thomas Monjalon
d8c4ae2755 ethdev: remove Rx interrupt switch
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
2015-09-03 19:22:48 +02:00
Wenzhuo Lu
cff4a985ef igb: fix ieee1588 timestamping
Ieee1588 reads system time to set its timestamp. On 1G NICs, for example,
i350, system time is disabled by default. It means the ieee1588 timestamp
will always be 0.
This patch enables system time when ieee1588 is enabled.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
2015-08-03 14:42:22 +02:00
Stephen Hemminger
03e93ba4f6 e1000: raise log level of significant events
Any message about incorrect API usage should be at NOTICE
level or above.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2015-07-30 20:15:50 +02:00
Stephen Hemminger
f9ea79e670 e1000: fix log level of debug messages
Any debug messages about hardware should be under debug (or removed)
and reduce customer visible log spam.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2015-07-30 20:15:50 +02:00
Cunming Liang
c3cd3de0ab igb: enable Rx queue interrupts for PF
The patch does below for igb PF:
- Setup NIC to generate MSI-X interrupts
- Set the IVAR register to map interrupt causes to vectors
- Implement interrupt enable/disable functions

Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
2015-07-27 23:13:57 +02:00
Bernard Iremonger
54a385fa47 e1000: free queue memory when closing
Queues were freed in clear function called in stop function.
Split clearing and freeing in separate functions to
move queue freeing from stop to close function.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-19 21:22:03 +02:00
Bernard Iremonger
b9eee2cb8c e1000: support port hotplug
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_em_pmd,
rte_igb_pmd and rte_igbvf_pmd.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
2015-07-19 21:22:03 +02:00
Liang-Min Larry Wang
83c314da4c igb: add access to specific device info
add function to support ethtool ops:
- get_reg_length
- get_regs
- get_eeprom_length
- get_eeprom
- set_eeprom

Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 23:56:13 +02:00
Liang-Min Larry Wang
04b51c5af5 igb: add default mac address modifier
- set_mac_addr

Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-16 23:56:13 +02:00
John McNamara
b8a1a1e7b7 e1000: add ieee1588 timestamping
Add e1000/igb support for new ethdev APIs to enable and read
IEEE1588 PTP timestamps.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
2015-07-10 02:36:25 +02:00
Helin Zhang
8208e85a22 ethdev: add the hash key size per device
To support querying hash key size per port, an new field of
'hash_key_size' was added in 'struct rte_eth_dev_info' for storing
hash key size in bytes.

The correct hash key size in bytes should be filled into the
'struct rte_eth_dev_info', to support querying it.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-07-09 01:14:51 +02:00
Ivan Boule
23138c4a88 e1000: add multicast MAC address filtering
Support the PMD function "set_mc_addr_list" in the "igb", "igb-vf",
and "em" Poll Mode Drivers.

Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
2015-06-12 15:55:38 +02:00
Stephen Hemminger
6c52c126f2 drivers: explicit initialization of pci drivers
Upcoming drivers will need to be able to support other bus types.
This is a transparent change to how struct eth_driver is initialized.
It has not function or ABI layout impact, but makes adding a later
bus type (Xen, Hyper-V, ...) much easier.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2015-06-12 11:10:10 +02:00
Bruce Richardson
d15fcf76c8 e1000: move to drivers/net/
Move e1000 pmd to drivers/net directory
As part of move, rename "e1000" subdirectory, which contains the code
from the "base driver", to "base".

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2015-05-22 15:51:38 +02:00