This patch implements API for configuration and
validation of max size for LRO aggregated packet.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new Rx offload flag `DEV_RX_OFFLOAD_RSS_HASH` which can be used to
enable/disable PMDs write to `rte_mbuf:#️⃣:rss`.
PMDs notify the validity of `rte_mbuf:#️⃣rss` to the application
by enabling `PKT_RX_RSS_HASH ` flag in `rte_mbuf::ol_flags`.
Also update testpmd rx_offload command to include RSS_HASH
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add `rte_eth_dev_set_ptypes` function that will allow the application
to inform the PMD about reduced range of packet types to handle.
Based on the ptypes set PMDs can optimize their Rx path.
-If application doesn’t want any ptype information it can call
`rte_eth_dev_set_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
and PMD may skip packet type processing and set rte_mbuf::packet_type to
RTE_PTYPE_UNKNOWN.
-If application doesn’t call `rte_eth_dev_set_ptypes` PMD can return
`rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
-If application is interested only in L2/L3 layer, it can inform the PMD
to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
`rte_eth_dev_set_ptypes(ethdev_id,
RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change the type of burst mode information from bit field to free string
data, so that each PMD can describe the Rx/Tx busrt functions flexibly.
Fixes: eb5902504a13 ("ethdev: add API for getting burst mode information")
Fixes: 6b6609f68ccd ("net/i40e: support Rx/Tx burst mode info")
Fixes: e9a10e6c2102 ("net/ice: support Rx/Tx burst mode info")
Fixes: 7fe108edcf53 ("app/testpmd: show Rx/Tx burst mode description")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Some PMDs have more than one Rx/Tx burst paths, add the ethdev API
that allows an application to retrieve the mode information about
Rx/Tx packet burst such as Scalar or Vector, and Vector technology
like AVX2.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
As legacy filter API "filter_ctrl" is superseded since 2017
by the rte_flow API, and got the deprecated attribute in DPDK 19.05,
it is time to remove the associated features from the matrix.
Not documenting deprecated features as supported will avoid confusion.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add rte_eth_read_clock to read the raw clock of a device.
The main use is to get the device clock conversion co-efficients to be
able to translate the raw clock of the timestamp field of the pkt mbuf
to a local synced time value.
This function was missing to allow users to convert the Rx timestamp
field to real time without the complexity of the rte_timesync* facility.
One can derivate the clock frequency by calling twice read_clock and
then keep a common time base.
Signed-off-by: Tom Barbette <barbette@kth.se>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch fixes a wrong tag in guides/nics/features.rst.
The features tags should be, according to the
"Features Overview" section in this doc, one of the following:
"uses", "implements", "provides", or "related".
Hence in Inner RSS section, it should be "uses"
instead of "users".
Fixes: d0a87d9aa8de ("doc: update mlx5 guide on tunnel offloading")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Based on the PKT_TX_TCP_SEG definition,
the application needs to update PKT_TX_IPV4 or PKT_TX_IPV6
based on IPV4 or IPV6 packet and PKT_TX_IP_CKSUM ol_flags
to enable Tx TSO offload.
Fixes: dad1ec72a377 ("doc: document NIC features")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Introduced DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flags and
PKT_TX_OUTER_UDP_CKSUM mbuf ol_flags to enable Tx outer UDP
checksum offload.
To use hardware Tx outer UDP checksum offload, the user needs to,
- enable following in mbuf:
a) fill outer_l2_len and outer_l3_len in mbuf
b) set the PKT_TX_OUTER_UDP_CKSUM flag
c) set the flag PKT_TX_OUTER_IPV4 or PKT_TX_OUTER_IPV6
- configure DEV_TX_OFFLOAD_OUTER_UDP_CKSUM offload flags in slow path
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Introduced DEV_RX_OFFLOAD_OUTER_UDP_CKSUM Rx offload flag and
PKT_RX_OUTER_L4_CKSUM_* mbuf ol_flags to detect outer UDP checksum
status.
- To use hardware Rx outer UDP checksum offload, the user needs to
configure DEV_RX_OFFLOAD_OUTER_UDP_CKSUM offload flags in slowpath.
- Driver updates checksum status in mbuf ol_flag as
PKT_RX_OUTER_L4_CKSUM_* flags.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Based on PKT_TX_[TCP|UDP|SCTP]_CKSUM definition the user needs
to fill l2_len and l3_len mbuf fields before issuing HW Tx
checksum request.
Fixes: dad1ec72a377 ("doc: document NIC features")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Based on PKT_TX_IP_CKSUM definition the user needs
to fill l2_len and l3_len mbuf fields before issuing
HW Tx checksum request.
Fixes: dad1ec72a377 ("doc: document NIC features")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Update implementation that when PKT_RX_QINQ_STRIPPED mbuf ol_flags
set by PMD, PKT_RX_QINQ, PKT_RX_VLAN_STRIPPED & PKT_RX_VLAN
should be also set.
Clarify mbuf documentations that when PKT_RX_QINQ set PKT_RX_VLAN also
should be set.
So that appllication can rely on PKT_RX_QINQ flag to access both
mbuf.vlan_tci & mbuf.vlan_tci_outer
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Fixes: 3d12dceed2df ("ethdev: add new offload flag to keep CRC")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
It's not possible to setup a queue when the port is started
because of a check in ethdev layer. New capability flags are
added in order to relax this check for devices which support
queue setup in runtime. The functions rte_eth_[rx|tx]_queue_setup
will raise an error only if the port is started and runtime setup
of queue is not supported.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The feature was added at the end of the table.
And the description was between the anchor _nic_features_timesync
and its title.
It is moved near related features with a new anchor.
It is also renamed from "mbuf fast free" to "fast mbuf free".
Fixes: d6f90afd3070 ("ethdev: add mbuf fast free Tx offload")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a new offload capability flag for Rx HW
timestamp and enabling/disabling this via rte_eth_rxmode.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
As described in API documentation, the field hw_ip_checksum
requests both L3 and L4 offload.
Fixes: dad1ec72a377 ("doc: document NIC features")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
PMDs which expose this offload cap supports optimization for fast release
of mbufs following successful Tx.
Such optimization requires that per queue, all mbufs come from the same
mempool and has refcnt = 1.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce a new API to configure Tx offloads.
In the new API, offloads are divided into per-port and per-queue
offloads. The PMD reports capability for each of them.
Offloads are enabled using the existing DEV_TX_OFFLOAD_* flags.
To enable per-port offload, the offload should be set on both device
configuration and queue configuration. To enable per-queue offload, the
offloads can be set only on queue configuration.
In addition the Tx offloads will be disabled by default and be
enabled per application needs. This will much simplify PMD management of
the different offloads.
Applications should set the ETH_TXQ_FLAGS_IGNORE flag on txq_flags
field in order to move to the new API.
The old Tx offloads API is kept for the meanwhile, in order to enable a
smooth transition for PMDs and application to the new API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce a new API to configure Rx offloads.
In the new API, offloads are divided into per-port and per-queue
offloads. The PMD reports capability for each of them.
Offloads are enabled using the existing DEV_RX_OFFLOAD_* flags.
To enable per-port offload, the offload should be set on both device
configuration and queue configuration. To enable per-queue offload, the
offloads can be set only on queue configuration.
Applications should set the ignore_offload_bitfield bit on rxmode
structure in order to move to the new API.
The old Rx offloads API is kept for the meanwhile, in order to enable a
smooth transition for PMDs and application to the new API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Document NIC features, add more information about them and add more
implementation related support.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
