This patch removes table id parameter from all the flow
classify apis to reduce the complexity alongwith some code
cleanup.
The validate api is exposed as public api to allow user
to validate the flow before adding it to the classifier.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
On SUSE11 with gcc 4.5.1 the following build error occurred,
most likely because of improper handling of annonymous unions:
examples/ipsec-secgw/ipsec.c:87:4 error:
unknown field ‘ipsec’ specified in initializer
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This application shows a simple usage of the
rte_flow API for hardware filtering offloading.
In this demo we are filtering specific IP to
specific target queue, while sending all the
rest of the packets to other queue.
Signed-off-by: Ori Kam <orika@mellanox.com>
All PCI functionality should be hidden from apps via the PCI bus driver,
the EAL and individual device drivers. Therefore remove the inclusion of
rte_pci.h from sample apps.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Check return value of fseek and exit if non zero.
Coverity issue: 143435
Fixes: bab16ddaf2 ("examples/flow_classify: add sample application")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
With -f-strict-aliasing enabled by default from -O2, gcc > 5.x gives
undefined behavior in port_groupx4 in ARM. 'pn' and 'pnum' are
two different pointers pointing to same chunk of memory and
with -f-strict-aliasing the pointers are assumed to be pointing to
different memory and compiler reorders instructions that depend on
pnum and pn. This breaks port grouping algorithm.
This patch eliminates the above problem by introducing a compiler
barrier between the instructions that depend on pnum, pn and lp.
Fixes: 569b290cdb ("examples/l3fwd: add NEON implementation")
Cc: stable@dpdk.org
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
To group consecutive packets with same destination port in bursts of 4
neon intrinsic data types dp1 and dp2 are calculated such that if
dst_port[]={a,b,c,d,e,f,g,h,i...} dp1 should contain: <a,b,c,d> and
dp2 should contain: <b,c,d,e> in the first iteration. dp1 should
be <e,f,g,h> and dp2 should be <f,g,h,i> in the next iteration.
Whereas the existing code incorrectly calculates dp1 as <d,e,f,g> from
second iteration.
This patch fixes the incorrect ARM NEON instructions on dp1.
Fixes: 569b290cdb ("examples/l3fwd: add NEON implementation")
Cc: stable@dpdk.org
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Implement the same hash functions with crc32 on arm platform.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Hash table function will check if the input bucket size is power of 2,
so the parameter should be rounded up before sending to the creating
function.
Signed-off-by: Jianbo Liu <jianbo.liu@arm.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This commit fixes a possible race condition if an application
uses the service-cores infrastructure and the function to run
a service on an application lcore at the same time.
The fix is to change the num_mapped_cores variable to be an
atomic variable. This causes concurrent accesses by multiple
threads to a service using rte_service_run_iter_on_app_lcore()
to detect if another core is currently mapped to the service,
and refuses to run if it is not multi-thread safe.
The run iteration on app lcore function has two arguments, the
service id to run, and if atomics should be used to serialize access
to multi-thread unsafe services. This allows applications to choose
if they wish to use use the service-cores feature, or if they
take responsibility themselves for serializing invoking a service.
See doxygen documentation for more details.
Two unit tests were added to verify the behaviour of the
function to run a service on an application core, testing both
a multi-thread safe service, and a multi-thread unsafe service.
The doxygen API documentation for the function has been updated
to reflect the current and correct behaviour.
Fixes: e9139a32f6 ("service: add function to run on app lcore")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_malloc_virt2phy() is renamed to rte_malloc_virt2iova().
The deprecated name is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
It is easier to find all constructor functions when they use
the same macros RTE_INIT or RTE_INIT_PRIO.
The macro definitions are moved from rte_eal.h to rte_common.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Simple_mp example receives message size less than 64 chars while send
side accepts chars less than 128, this leads to different result when
sending text length larger than 64.
This patch uses same buffer length on both message pool and command
line.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Update the sample app eventdev_pipeline_sw_pmd to use service run iter for
event scheduling in case of sw eventdev.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
With the current scheme of event queue configuration the cfg schedule
type macros (RTE_EVENT_QUEUE_CFG_*_ONLY) are inconsistent with the
event schedule type (RTE_SCHED_TYPE_*) this requires unnecessary
conversion between the fastpath and slowpath API's while scheduling
events or configuring event queues.
This patch aims to fix such inconsistency by using event schedule
types (RTE_SCHED_TYPE_*) for event queue configuration.
This patch also fixes example/eventdev_pipeline_sw_pmd as it doesn't
convert RTE_EVENT_QUEUE_CFG_*_ONLY to RTE_SCHED_TYPE_* which leads to
improper events being enqueued to the eventdev.
Fixes: adb5d5486c ("examples/eventdev_pipeline_sw_pmd: add sample app")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Build fails when rte_security is disabled; make rte_security mandatory
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Tested-by: David Marchand <david.marchand@6wind.com>
Ipsec-secgw application is modified so that it can support
following type of actions for crypto operations
1. full protocol offload using crypto devices.
2. inline ipsec using ethernet devices to perform crypto operations
3. full protocol offload using ethernet devices.
4. non protocol offload
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
For AEAD algorithms, the physical address for the digest
was being set incorrectly.
Fixes: 2661f4fbe9 ("examples/l2fwd-crypto: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
According to rfc4106 the IV should be unique and can be implemented
as counter.
The changed was created because putting an analyzer on wire and
comparing packets generated by this application and Linux kernel.
Linux kernel sets IV as BE, so it is worth to do the same for
future debug / comparison.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Search for session also with AEAD algorithms.
Fixes: 501e9c226a ("examples/ipsec-secgw: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
AEAD algorithms were not being added in the mapping
between algorithms and crypto devices, only cipher and
authentication chained algorithms.
Fixes: 501e9c226a ("examples/ipsec-secgw: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
IPv6 payload length header field should contain only the number of bytes
following the IPv6 header and not the entire packet size.
Fixes: f159e70b09 ("examples/ipsec-secgw: support transport mode")
Fixes: 906257e965 ("examples/ipsec-secgw: support IPv6")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Fix port id issues and keep variables related to port ids in
consistent data type definition "uint16_t".
Remove unnecessary cast in the meanwhile.
Fixes: f8244c6399 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Since new_ip and ip4 are overlapping buffers copying ip4 over new_ip
using memmove() might overwrite memory at ip4. This could happen if
following condition holds:
ip_hdr_len > sizeof(struct esp_hdr) + sa->iv_len
Thus using ip4 to check ip version is wrong as it might not contain
proper value.
Fixes: f159e70b09 ("examples/ipsec-secgw: support transport mode")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Reviewed-by: Aviad Yehezkel <aviadye@mellanox.com>
Use snprintf instead strncpy to get safe null string termination.
There was possible to get not terminated string after strncpy operation.
Coverity issue: 158631
Fixes: db75c7af19 ("examples/vhost_scsi: introduce a new sample app")
Cc: stable@dpdk.org
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Since virtual devices, i.e mrvl net pmd, do not touch pci_dev
dereferencing it will cause segmentation fault as by default
it's set to NULL in rte_eth_dev_info_get().
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix problem with uninitialized rx/tx deferred_start flags of the struct
rte_eth_rxconf/txconf by initializing with 0 value (deferred start of
the rx/tx queues is turned off). This setting allows device rx/tx
queues to start with rte_eth_dev_start().
Coverity issue: 194999, 195009
Fixes: de3cfa2c98 ("sched: initial import")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
A delay in the loop waiting for the virtio-serial commands in the
vm_power_manager app was causing a lag in the response time. This was
set to 1 second, and has now been changed to 1ms.
Fixes: f14791a812 ("examples/vm_power_mgr: add policy to channels")
Signed-off-by: David Hunt <david.hunt@intel.com>
This commit adds a new sample app, which showcases the value
of running services. In particular it allows the application
to dynamically schedule services to service-cores.
The sample app itself registers a number of dummy services,
and applies different profiles to them at runtime. Note that
this sample application does not forward any traffic - it
demonstrates advanced usage of the service cores API.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Gage Eads <gage.eads@intel.com>
The flow_classify sample application exercises the following
librte_flow_classify API's:
rte_flow_classifier_create
rte_flow_classifier_query
rte_flow_classify_table_create
rte_flow_classify_table_entry_add
rte_flow_classify_table_entry_delete
It sets up the IPv4 ACL field definitions.
It creates table_acl and adds and deletes rules using the
librte_table API.
It uses a file of IPv4 five tuple rules for input.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Introduce mask-based hash functions in hash_func.h.
Propagate their usage in test/test, test/test-pipeline and
examples/ip_pipeline.
Remove the non-mask-based hash function prototype from API (which
was previously used as build workaround).
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rework for the 16-byte key hash tables (both the extendible
bucket and LRU)to use the mask-based hash function and the
unified parameter structure.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rework for the 8-byte key hash tables (both the extendible
bucket and LRU)to use the mask-based hash function and the
unified parameter structure.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rework for the variable size key extendible bucket (EXT) hash
table to use the mask-based hash function and the unified
parameter structure.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add unified parameter structure for all hash tables in librte_table.
Add mask-based hash function prototype, which is input parameter for
all hash tables.
Renamed the non-mask-based hash function prototype and all the calls
to it (to be removed later).
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The non-dosig version of the variable size key extendible bucket
hash tables are removed. The remaining hash tables are renamed to
eliminate the dosig particle from their name.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The non-dosig version of the 16-byte key hash tables (both extendable
bucket and LRU) are removed. The remaining hash tables are renamed to
eliminate the dosig particle from their name.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The non-dosig version of the 8-byte key hash tables (both extendable
bucket and LRU) are removed. The remaining hash tables are renamed to
eliminate the dosig particle from their name.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Removing calls to hash tables that are going to be removed later.
The calls are removed from test/test, test/test-pipeline,
examples/ip_pipeline.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Overrunning array per_lcore_this_sched->current_lthread->tls->data of
1024 8-byte elements at element index 1024 using index k.
Fixed by correct check k condition.
Coverity issue: 143462, 143463
Fixes: 116819b9ed ("examples/performance-thread: add lthread subsystem")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Overrunning array schedcore of 128 8-byte elements at element index 128
using index core id.
Fixed by correct check index lcoreid condition and
change type of lcoreid to unsigned.
Coverity issue: 143459, 143461
Fixes: 116819b9ed ("examples/performance-thread: add lthread subsystem")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
There was a call for thread create function without result check.
Added result check and message printout after failure.
Coverity issue: 143441
Fixes: 433ba6228f ("examples/performance-thread: add pthread_shim app")
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Use of rte_mempool_create() with the helper provided in
librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool else
it may not work on implementation using the HW buffer pool
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds altivec support for lpm packet processing in powerpc.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Add return value check and error handling for fseek call.
Coverity issue: 143435
Fixes: 361b2e9559 ("acl: new sample l3fwd-acl")
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
Some invalid callback functions are provided to rte_pktmbuf_pool_init()
without their associated data causing a segmentation fault when the
function tries to use it. In this example, those callbacks are not
necessary, they can be safely replaced by NULL pointers.
Fixes: 95e8005a56 ("examples/l2fwd_fork: new app")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Current version is compatible with PQOS version 1.3
but not compatible with higher versions. This change
makes l2fwd-cat example compatible with versions since 1.4
Signed-off-by: Vladimir Kuramshin <v.kuramshin@samsung.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Remove variable declaration from within for loop.
Fixes: f14791a812 ("examples/vm_power_mgr: add policy to channels")
Signed-off-by: David Hunt <david.hunt@intel.com>
In order to achieve fully reproducible builds, always use the same
inclusion order for headers in the Makefiles.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
According to the API, AES-CCM has special requirements
when setting IV and AAD fields.
The L2fwd-crypto app is updated to set the nonce (IV)
and AAD in the right positions in these two fields
(1 byte after start of IV field and 18 bytes after start
of AAD).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
errno should be initialized to 0 before calling strtol
Fixes: 1df9c0109f ("examples/l2fwd-crypto: parse key parameters")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
We need to set vf mac from the host, so that they will be in sync on the
guest and the host. Otherwise, we'll have a random mac on the guest, and
a 00:00:00:00:00:00 mac on the host.
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Here we're adding an example of setting up a policy, and allowing the
vm_cli_guest app to send it to the host using the cli command
"send_policy now"
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
We need to initialise the port's we're monitoring to be able to see
the throughput.
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Events sent through single-link queues are naturally in-order and
atomic, without reordering or atomic scheduling. Logically the
nb_atomic_flows and nb_atomic_order_sequences arguments don't apply to a
single link queue, but applications must set these (depending on the queue
config type) to bypass the is_valid_{ordered, atomic}_queue_conf() checks
in the eventdev layer.
This commit updates those is_valid_* functions to ignore queues with the
SINGLE_LINK flag, to simplify their configuration.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add extra commands to guest cli to allow enable/disable of
per-core turbo. Includes messages to vm_power_mgr in host.
Signed-off-by: David Hunt <david.hunt@intel.com>
Add extra commands to command line to allow enable/disable of
per-core turbo.
When a core has turbo enabled, calling for max frequency will allow it to
go to a turbo frequency (P0n).
When a core has turbo disabled, calling for max frequency will allow it to
go to the maximum non-turbo frequency (P1), but not beyond.
Signed-off-by: David Hunt <david.hunt@intel.com>
During the refactoring of the sample app to be more generic, the
option to set -n0 and process a huge number of packets was lost.
This commit re-adds -n0, and will process INT64_MAX number of packets.
Fixes: adb5d5486c ("examples/eventdev_pipeline_sw_pmd: add sample app")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Fix a typo that cause IPv6 packet type not be parsed.
Fixes: 71a7e2424e ("examples/l3fwd: fix using packet type blindly")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
rte_cryptodev_socket_id() returns the socket id of
a crypto device, unless the device id is not valid,
in which case, it returns -1.
This should not happen, as the device id is controlled
by the application, but just for safety, a check is added.
Coverity issue: 158628, 158638, 158656, 158662
Fixes: b3bbd9e5f2 ("cryptodev: support device independent sessions")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
APP_MAX_LCORES is hardcoded as 64.
This will cause build err when RTE_MAX_LCORE is less then 64.
"args.c:127:22: error: iteration 8 invokes undefined behavior
[-Werror=aggressive-loop-optimizations]
if (cfg->lcore_role[i] == ROLE_RTE)
~~~~~~~~~~~~~~~^~~
args.c:126:2: note: within this loop
for (i = 0; i < APP_MAX_LCORE; i++) {"
Fixes: d52b5e735a ("examples/qos_sched: fix lcore limit")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
load_balancer app can also work for lower number of cores.
Limit the cores Worker and IO cores to 16 as defined in original
App. Otherwise use the actual number of lcores as MAX.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds a new option to enable/disable the
MAC addresses updating done at forwarding time: --[no-]mac-updating
By default, MAC address updating remains enabled, to keep consistency
with previous usage.
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
AEAD key was being set using the cipher key parameters,
instead of the AEAD key parameters.
Fixes: 2661f4fbe9 ("examples/l2fwd-crypto: add AEAD parameters")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
IV was not being set for AEAD algorithms.
Fixes: 2661f4fbe9 ("examples/l2fwd-crypto: add AEAD parameters")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Digest length was not being set when using authentication
algorithms.
Fixes: 2661f4fbe9 ("examples/l2fwd-crypto: add AEAD parameters")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Additional Authenticated Data (AAD) is called "aad" in most
places of cryptodev, but it was called "add_auth_data"
in the AEAD transform transform (aead_xform).
This field is renamed to "aad_length" in order to keep
consistency.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
vhost-user protocol is common to many virtio devices, such as
virtio_net/virtio_scsi/virtio_blk. Since DPDK vhost library
removed the NET specific data structures, the vhost library
is common to other virtio devices, such as virtio-scsi.
Here we introduce a simple memory based block device that
can be presented to Guest VM through vhost-user-scsi-pci
controller. Similar with vhost-net, the sample application
will process the I/Os sent via virt rings.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
In devargs rework, rte_pci.h won't be included by rte_ethdev.h
(via rte_devargs.h) anymore.
rte_ethtool_get_drvinfo() could use rte_devargs.name instead of
creating equivalent bus specific name.
For now, it is workarounded by just including rte_pci.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds a sample app for the eventdev library.
The app has been tested with DPDK 17.05-rc2, hence this
release (or later) is recommended.
The sample app showcases a pipeline processing use-case,
with event scheduling and processing defined per stage.
The application receives traffic as normal, with each
packet traversing the pipeline. Once the packet has
been processed by each of the pipeline stages, it is
transmitted again.
The app provides a framework to utilize cores for a single
role or multiple roles. Examples of roles are the RX core,
TX core, Scheduling core (in the case of the event/sw PMD),
and worker cores.
Various flags are available to configure numbers of stages,
cycles of work at each stage, type of scheduling, number of
worker cores, queue depths etc. For a full explaination,
please refer to the documentation.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The session mempool pointer is needed in each queue pair,
if session-less operations are being handled.
Therefore, the API is changed to accept this parameter,
as the session mempool is created outside the
device configuration function, similar to what ethdev
does with the rx queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Change crypto device's session management to make it
device independent and simplify architecture when session
is intended to be used on more than one device.
Sessions private data is agnostic to underlying device
by adding an indirection in the sessions private data
using the crypto driver identifier.
A single session can contain indirections to multiple device types.
New function rte_cryptodev_sym_session_init has been created,
to initialize the driver private session data per driver to be
used on a same session, and rte_cryptodev_sym_session_clear
to clear this data before calling rte_cryptodev_sym_session_free.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Device id is going to be removed from session,
as the session will be device independent.
Therefore, the functions that attach/dettach a session
to a queue pair need to be updated, to accept the device id
as a parameter, apart from the queue pair id and the session.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of creating the session mempool while configuring
the crypto device, apps will create the mempool themselves.
This way, it gives flexibility to the user to have a single
mempool for all devices (as long as the objects are big
enough to contain the biggest private session size) or
separate mempools for different drivers.
Also, since the mempool is now created outside the
device configuration function, now it needs to be passed
through this function, which will be eventually passed
when setting up the queue pairs, as ethernet devices do.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Cryptodev session structure was a duplication of the
cryptodev symmetric structure.
It was used by some PMDs that should use the symmetric
structure instead.
Since this structure was internal, there is no deprecation
notice required.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Now that all the structures/functions for AEAD algorithms
are in place, migrate the two supported algorithms
AES-GCM and AES-CCM to these, instead of using
cipher and authentication parameters.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since there is a new operation type (AEAD), add parameters
for this in the application.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since there is a new operation type (AEAD), add parameters
for this in the application.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Some extra functions have been created to avoid
too many nested conditionals.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Digest length was duplicated in the authentication transform
and the crypto operation structures.
Since digest length is not expected to change in a same
session, it is removed from the crypto operation.
Also, the length has been shrunk to 16 bits,
which should be sufficient for any digest.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Additional authenticated data (AAD) information was duplicated
in the authentication transform and in the crypto
operation structures.
Since AAD length is not meant to be changed in a same session,
it is removed from the crypto operation structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Authentication algorithms, such as AES-GMAC or the wireless
algorithms (like SNOW3G) use IV, like cipher algorithms.
So far, AES-GMAC has used the IV from the cipher structure,
and the wireless algorithms have used the AAD field,
which is not technically correct.
Therefore, authentication IV parameters have been added,
so API is more correct. Like cipher IV, auth IV is expected
to be copied after the crypto operation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV parameters (offset and length) should not
change for operations in the same session, these parameters
are moved to the crypto transform structure, so they will
be stored in the sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV now is copied after the crypto operation, in
its private size, IV can be passed only with offset
and length.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Usually, IV will change for each crypto operation.
Therefore, instead of pointing at the same location,
IV is copied after each crypto operation.
This will let the IV to be passed as an offset from
the beginning of the crypto operation, instead of
a pointer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Usually, IV will change for each crypto operation.
Therefore, instead of pointing at the same location,
IV is copied after each crypto operation.
This will let the IV to be passed as an offset from
the beginning of the crypto operation, instead of
a pointer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Instead of storing a pointer to operation specific parameters,
such as symmetric crypto parameters, use a zero-length array,
to mark that these parameters will be stored after the
generic crypto operation structure, which was already assumed
in the code, reducing the memory footprint of the crypto operation.
Besides, it is always expected to have rte_crypto_op
and rte_crypto_sym_op (the only operation specific parameters
structure right now) to be together, as they are initialized
as a single object in the crypto operation pool.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Keep x86 related code in l3fwd_sse.h, and move common code to
l3fwd_common.h, which will be used by other Archs.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
The l3fwd_em_sse.h is enabled by NO_HASH_LOOKUP_MULTI.
Renaming it because it's only for sequential hash lookup,
and doesn't include any x86 SSE instructions.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Updated Makefile to allow compilation for arm64 architecture.
Added necessary arm64 support for lthread.
Fixed minor compilation errors for arm64 compilation.
Tested the apps l3fwd-thread and lthread_pthread_shim on thunderx
and x86_64.
Signed-off-by: Ashwin Sekhar T K <ashwin.sekhar@caviumnetworks.com>
Moved the architecture dependent stack set code to architecture
specific directory.
Signed-off-by: Ashwin Sekhar T K <ashwin.sekhar@caviumnetworks.com>
Since this example is for x86_64 platforms only, and since SSE4 is now a
mandatory requirement, we can remove the ifdefs checking for that
instruction set level, and the fallbacks if it is not present.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since SSE4 is now part of the minimum requirements for DPDK, we don't need
to check for its presence any more.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since SSE4 is now part of the minimum requirements for DPDK, we don't need
to check for its presence any more.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Remove rte_pause() definition from rte_common.h and
switchover to architecture specific rte_pause.h
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Chain parameter can be CIPHER_HASH, HASH_CIPHER,
CIPHER_ONLY or HASH_ONLY, but only the first two
were shown in the application help.
Fixes: 1a75e9f3fa ("examples/l2fwd-crypto: add cipher/hash only cases")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Statistics period time option is parsed with -T argument,
but -t was accepted by mistake, instead.
Fixes: 387259bd6c ("examples/l2fwd-crypto: add sample application")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fixing the below error by returning from the function early
when count == 0.
Issue flagged by GCC 7.1.1
examples/vhost/virtio_net.c:370:38: error: ‘desc_indexes[0]’ may be used
uninitialized in this function [-Werror=maybe-uninitialized]
rte_prefetch0(&vr->desc[desc_indexes[0]]);
Fixes: ca059fa5e2 ("examples/vhost: demonstrate the new generic APIs")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This one is more of a compiler issue as application
checks the app_parse_opt_vals() return value.
Since this code is in slow path, adding a memset
to fix following "maybe-uninitialized" warning.
qos_sched/args.c: In function ‘app_parse_args’:
examples/qos_sched/args.c:254:32: error: ‘vals[0]’ may be
used uninitialized in this function [-Werror=maybe-uninitialized]
pconf->rx_port = (uint8_t)vals[0];
~~~~^~~
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The return value of strnlen(s, maxlen) is never bigger than maxlen.
Fixes: 4796ad63ba ("examples/vhost: import userspace vhost application")
Signed-off-by: Gang Jiang <jiangg@mail.ustc.edu.cn>
There is no function to refer any part of execinfo.h, so remove the
reference to it.
And there is no this file in musl. So need to remove it to support musl.
Signed-off-by: Wei Dai <wei.dai@intel.com>
When RTE_DEVEL_BUILD is unset, -rpath is unset.
So the ethtool app cannot link with ixgbe shared library
which is required by ethtool lib:
warning: librte_pmd_ixgbe.so.1, needed by
examples/ethtool/lib/x86_64-native-linuxapp-gcc/lib/librte_ethtool.so,
not found (try using -rpath or -rpath-link)
It is fixed by adding the library in the application link.
The library link is also improved to specify that this explicit link
to ixgbe is needed only in the shared lib mode.
Fixes: 077d223e25 ("examples/ethtool: use ixgbe public function")
Signed-off-by: Markos Chandras <mchandras@suse.de>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Timothy Redaelli <tredaelli@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Port ID is not an index from 0 to n_nic_ports, but rather a value
of nic_ports array.
Fixes: af75078fec ("first public release")
Signed-off-by: Andriy Berestovskyy <andriy.berestovskyy@caviumnetworks.com>
L3fwd power app monitors the RX queues to see if the polling frequency
should be adjusted (the busier the queue, the higher the frequency).
The app uses several thresholds in the ring to determine the frequency,
being 96 the highest one, when frequency should be highest.
The problem is that the difference between this value and the ring size
is not big enough (128 - 96 = 32 descriptors), which means that
if the descriptors are not replenished quick enough, queue might
not be busy, but the app would think that it is, because 96th descriptor
is set.
Therefore, by increasing this gap (increasing the RX ring size),
we make sure that this false measurement will not happen.
Fixes: b451aa39db ("examples/l3fwd-power: use DD bit rather than RX queue count")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
If the number of rx queues is zero, it is meaningless to enable
rx interrupt. This patch fixes it.
Fixes: aee3bc79cc ("examples/l3fwd-power: enable one-shot Rx interrupt and polling switch")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds the unlinking/unmapping of shared host memory
on termination of l2fwd-keepalive. Previously it was only
cleaned on re-running of the example application.
Fixes: e64833f227 ("examples/l2fwd-keepalive: add sample application")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Tested-by: Roman Korynkevych <romanx.korynkevych@intel.com>
The l2fwd-keepalive example has infinite processing loops and as a
result the only way to exit it is via SIGINT/SIGTERM (e.g. Control-C).
The resulting shutdown is unclean, which is fixed by adding a signal
handler that causes the processing loops to break.
Fixes: e64833f227 ("examples/l2fwd-keepalive: add sample application")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Tested-by: Roman Korynkevych <romanx.korynkevych@intel.com>
To miss updating the variable prev_tsc in function l2fwd_main_loop()
The patch fixes it.
Fixes: e2366e74e0 ("examples: use buffered Tx")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
While later releases in the FreeBSD 10 series have a CPU_COUNT macro
defined, FreeBSD 10.0 and 10.1 do not have this macro. Therefore we provide
a basic fallback implementation of the macro for platforms where it is not
defined.
Fixes: 433ba6228f ("examples/performance-thread: add pthread_shim app")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes: c0f87eb525 ("cryptodev: change burst API to be crypto op oriented")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes following compilation error, using uint64_t type,
instead of int128_t unnecessarily:
In file included from ./common/lthread.c:82:0:
./common/lthread_timer.h: In function ‘_ns_to_clks’:
./common/lthread_timer.h:49:20: error: expected ‘=’, ‘,’, ‘;’,
‘asm’ or ‘__attribute__’ before ‘clkns’
compilation terminated due to -Wfatal-errors.
Fixes: 116819b9ed ("examples/performance-thread: add lthread subsystem")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When building any of the perf-thread examples, the output .o files were
placed in two separate directories for each app: the regular build dir and
a "common" build directory. This was due to the way the files to be built
were specified, using a relative path. Switching to use VPATH to find the
files causes Make to put all .o's into the one build directory.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This set of sample apps did not compile on FreeBSD due to use of a number
of Linux/glibc-specific APIs, or APIs which existed in different headers
on FreeBSD. Specifically, the following APIs has problems:
* sched_getcpu() is a glibc extension, so use rte_lcore_id() on BSD
* pthread_yield() returns int on Linux, but void on FreeBSD, so
we have to create two slightly different copies of the function.
* the type for managing cpu sets is cpuset_t on FreeBSD rather than
cpu_set_t as on Linux, so use rte_cpuset_t from rte_lcore.h.
* APIs for managing cpu affinity are in pthread_np.h on FreeBSD, rather
than in pthread.h, also fixed by including rte_lcore.h
Fixes: 433ba6228f ("examples/performance-thread: add pthread_shim app")
Fixes: d48415e1fe ("examples/performance-thread: add l3fwd-thread app")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The "examples_clean" top-level build target calls "make clean" for each
individual example. However, for a number of those which were linux-only
examples, the "if" condition only had a dummy "all" target i.e. no "clean"
target, causing an error with examples_clean.
Fixes: 3417cd687e ("examples: ignore linux apps on bsd")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Lthread is awesome but it doesn't support C++.
So I write patch to support lthread to support C++.
Added "extern C {}" to lthread-headers
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Disable promiscuous mode by default since VLAN filter
does not work when promiscuous mode is enabled.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Some PMDs do not support 9,5K jumbo frames, so the example fails.
Limit the frame size to the maximum supported by the underlying NIC.
Signed-off-by: Andriy Berestovskyy <andriy.berestovskyy@caviumnetworks.com>
Some PMDs (mostly VFs) do not provide link up/down functionality.
Signed-off-by: Andriy Berestovskyy <andriy.berestovskyy@caviumnetworks.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
At the moment ip_pipeline example uses 32 during the initialization,
which leads to an error on systems with more than 32 CPUs.
Signed-off-by: Andriy Berestovskyy <andriy.berestovskyy@caviumnetworks.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Firewall ACL definition need to use same input index for source and
destination ports as these are 16 bits and would fit in one ACL
field of 32 bits. This is required as per librte_acl API. Without this
UDP/TCP source and destination ports filtering (and for that
matter ICMP type/code filtering) does not work.
Signed-off-by: Shyam Kumar Shrivastav <shrivastav.shyam@gmail.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
For padding calculation, it is necessary to know if algorithm
is a block cipher or stream cipher algorithm, and know the
block size for the algorithm.
In the application, this block size should be only the
cipher block size, but if authentication was used too,
it was being overwritten by the authentication block size,
which is not needed.
Fixes: 27cf2d1b18 ("examples/l2fwd-crypto: discover capabilities")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Previously, l2fwd-crypto application did not give user the
flexibility to decide which crypto device(s) will be used.
In this patch, a new cryptodev_mask option is added to the
application. Same as portmask, the cryptodev_mask avails the
user to mask out the unwanted crypto devices in the system.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
For AEAD algorithms, additional authenticated data (AAD)
can be passed, but it is optional, so its size can be zero.
However, it is required to set this length to zero in the crypto
operation to avoid undefined behaviour.
Fixes: 617a7949c9 ("examples/l2fwd-crypto: parse AAD parameter")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
example app's rxmode, VF driver will report the VF launch failure. So
this patch default to enable HW CRC strip to let VF launch successful.
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The performance-thread example was not build by default in the make
examples build target. It will compile ok for x86_64 targets so add it to
the examples makefile list for that platform.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
adding support for attaching session to queue pairs.
This is required as underlying crypto driver may only
support limited number of sessions per queue pair
if max_nb_sessions_per_qp > 0, session should be
attached to a particular qp.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Remove DPDK QAT sample app, in favour of the newer applications
that use the cryptodev library: ipsec-gw and l2fwd-crypto,
which has support for Intel QuickAssist devices.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
L2fwd-crypto app was creating an array of strings for the
supported algorithms, which was different from the strings
that are now in cryptodev.
Use the new API in cryptodev to parse the string from the user,
to get the algorithm enum, instead, so it is not necessary to add
a new supported algorithm in the cryptodev library and this app.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Deprecate the following functions:
- rte_set_log_level(), replaced by rte_log_set_global_level()
- rte_get_log_level(), replaced by rte_log_get_global_level()
- rte_set_log_type(), replaced by rte_log_set_level()
- rte_get_log_type(), replaced by rte_log_get_level()
The new functions provide a better control of the per-type log level,
and have a better name prefix (rte_log_).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Now DPDK vhost lib has been generic enough, that it can be used to
implement any vhost-user drivers.
For example, this patch implements a very simple vhost-user net driver,
mainly for demonstrating how to use those generic vhost APIs.
And when the --builtin-net-driver option is used, the example virtio-net
driver code will be invoked, instead of the one provided from the vhost
library.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Rename "rte_virtio_net.h" to "rte_vhost.h", to not let it be virtio
net specific.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We used to use rte_vhost_driver_session_start() to trigger the vhost-user
session. It takes no argument, thus it's a global trigger. And it could
be problematic.
The issue is, currently, rte_vhost_driver_register(path, flags) actually
tries to put it into the session loop (by fdset_add). However, it needs
a set of APIs to set a vhost-user driver properly:
* rte_vhost_driver_register(path, flags);
* rte_vhost_driver_set_features(path, features);
* rte_vhost_driver_callback_register(path, vhost_device_ops);
If a new vhost-user driver is registered after the trigger (think OVS-DPDK
that could add a port dynamically from cmdline), the current code will
effectively starts the session for the new driver just after the first
API rte_vhost_driver_register() is invoked, leaving later calls taking
no effect at all.
To handle the case properly, this patch introduce a new API,
rte_vhost_driver_start(path), to trigger a specific vhost-user driver.
To do that, the rte_vhost_driver_register(path, flags) is simplified
to create the socket only and let rte_vhost_driver_start(path) to
actually put it into the session loop.
Meanwhile, the rte_vhost_driver_session_start is removed: we could hide
the session thread internally (create the thread if it has not been
created). This would also simplify the application.
NOTE: the API order in prog guide is slightly adjusted for showing the
correct invoke order.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
rename "virtio_net_device_ops" to "vhost_device_ops", to not let it
be virtio-net specific.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
They are virtio-net specific and should be defined inside the virtio-net
driver.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Assume there is an application both support vhost-user net and
vhost-user scsi, the callback should be different. Making notify
ops per vhost driver allow application define different set of
callbacks for different driver.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The packet_type in mbuf is not correctly filled by ixgbe 82599 NIC.
To use the ether_type in ethernet header to check packet type is
more reliaber.
Fixes: 3c0184cc0c ("examples: replace some offload flags with packet type")
Fixes: ab351fe1c9 ("mbuf: remove packet type from offload flags")
Cc: stable@dpdk.org
Reported-by: Fangfang Wei <fangfangx.wei@intel.com>
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Fangfang Wei <fangfangx.wei@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Now that the enqueue function returns the amount of space in the ring,
we can use that to replace the old watermark functionality. Update the
example app to do so, and re-enable it in the examples Makefile.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring enqueue burst/bulk functions so that
those functions can optionally return the amount of free space in the
ring. This information can be used by applications in a number of ways,
for instance, with single-producer queues, it provides a max
enqueue size which is guaranteed to work. It can also be used to
implement watermark functionality in apps, replacing the older
functionality with a more flexible version, which enables apps to
implement multiple watermark thresholds, rather than just one.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The bulk fns for rings returns 0 for all elements enqueued and negative
for no space. Change that to make them consistent with the burst functions
in returning the number of elements enqueued/dequeued, i.e. 0 or N.
This change also allows the return value from enq/deq to be used directly
without a branch for error checking.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Remove the watermark support. A future commit will add support for having
enqueue functions return the amount of free space in the ring, which will
allow applications to implement their own watermark checks, while also
being more useful to the app.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Now that we're printing out a page of stats every second to the console,
we should give the stats it's own core so that we don't interfere with
the performance of the Rx core.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch tunes Rx, Tx, and rte_distributor_process() burst sizes to
maximize performance.
It also addresses some checkpatch issues.
The result is approximately 10% performance increase.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Give the distribution functionality it's own core for performance,
otherwise it's limited by the Rx core.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
On some machines, ports take several seconds to come up. This
patch causes the app to wait.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This will allow us to see what's going on at various stages
throughout the sample app, with per-second visibility
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This is the main switch over between the legacy API and the new
burst API. We rename all the functions in rte_distributor.c to remove
the _v1705, and we add in _v20 in the rte_distributor_v20.c
We also rename the rte_distributor_next.h as rte_distributor.h, as
this is now the public header.
At the same time, we need the autotests and sample app to compile
properly, hence those changes are in this patch also.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch extend next_hop field from 8-bits to 21-bits in LPM library
for IPv6.
Added versioning symbols to functions and updated
library and applications that have a dependency on LPM library.
Signed-off-by: Vladyslav Buslov <vladyslav.buslov@harmonicinc.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When possible, replace the uses of rte_mempool_create() with
the helper provided in librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool.
This also updates the documentation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The variable optind should be reset to one not zero.
From the man page:
"The variable optind is the index of the next element to be processed in
argv. The system initializes this value to 1.
The caller can reset it to 1 to restart scanning of the same argv, or when
scanning a new argument vector.”
The problem I saw with my application was trying to parse the wrong
option, which can happen as DPDK parses the first part of the command line
and the application parses the second part. If you call getopt() multiple
times in the same execution, the behavior is not maintained when using
zero for optind.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
The sample app was forcing the shared memory block for high/low
watermarks to be placed in a memzone on 2M pages. This prevented it
from running on systems with just 1G pages, so remove the flag forcing
2M pages.
Fixes: 1d6c3ee332 ("examples/quota_watermark: initial import")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The code indentation in the example app files used spaces rather than
tabs for indentation, and as such did not conform to DPDK conventions.
This left those modifying the code in a bind - to fix things on a line
by line basis so as to avoid checkpatch errors, or to keep things
consistent within the file, and accept checkpatch errors.
Since these files have not had too many changes since the original
import, there is little change history to lose by doing a complete
reformatting of the code, so just update all indentation to standard.
In the process, wrap long lines appropriately, avoiding splitting
error messages.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
L2fwd-crypto app was padding an incoming buffer,
to be aligned with the algorithm block size, in all cases.
This was not the right approach, as padding is only necessary
when using block cipher algorithms, such as AES-CBC.
In case of using a stream cipher algorithm, such as SNOW3G UEA2,
there is no need to include padding and increase the buffer size.
Fixes: 387259bd6c ("examples/l2fwd-crypto: add sample application")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This commit fixes an array overflow when number of crypto devices
is higher than 32.
Fixes: 387259bd6c ("examples/l2fwd-crypto: add sample application")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Some PMDs provide device specific APIs. Bond and xenvirt are existing
samples for this.
And since these are PMD libraries, there are two options on how to link
them for shared library build:
1- They can be linked to all applications by default, using common
rte.app.mk file.
2- They can be explicitly linked to applications that use device
specific API.
Currently option one is in use, this patch switches to the option two.
Moves library linking to the Makefile of application Makefile that uses
device specific API.
This prevent these PMD libraries to be a dependency to applications
that don't use these device specific APIs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch enhances the ethtool example to support to show
bus information, in the same way that the Linux kernel
ethtool does.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
To avoid confusion with distributor app, this commit
renames the flow-distributor sample app to server_node_efd,
since it shows how to use the EFD library and it is based
on a server/nodes model.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add minor adjustments to support SHA256 HMAC:
- extend maximum key length to match SHA256 HMAC
- add SHA256 HMAC parameters and configuration string
- add SHA256 HMAC to inbound and outbound cases
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This new sample app, based on the client/server sample app,
shows the user an scenario using the EFD library.
It consists of:
- A front-end server which has an EFD table that stores the
node id for each flow key, which will distribute the incoming
packets to the different nodes
- A back-end node, which has a hash table where node checks,
after reading packets coming from the server, whether the packet
is meant to be used in such node, in which case it will be TXed,
or not, in which case, packet will be dropped.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
This patch enhances the ethtool example to support to show
firmware version, in the same way that the Linux kernel
ethtool does.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Last changes in Niantic and Fortville NIC drivers causes that
vector Rx path is chosen by default in l3fwd-thread application.
This path doesn't support propagation of hw packet type recognition
to the packet_type field in mbuf, and packets cannot be classified
properly.
The approach to solve this problem is similar to the commit:
71a7e2424e ("examples/l3fwd: fix using packet type blindly").
To use sw packet analyzer, new command line option "--parse-ptype" is
introduced.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
This commit add to CLI command check for the following errors
1. SVLAN and CVLAN IDs greater than 12 bits
2. MPLS ID greater than 20 bits
3. max number of supported MPLS labels to avoid array overflow
It prevents running CLI commands with invalid parameters.
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
A dollar sign is missing and it is not needed because of VPATH.
Reported-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Avoid the use of several strncpy() since getopt is able to
map a long option with an id, which can be matched in the
same switch/case than short options.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Do the same than in l3fwd to avoid strcmp() for long options.
For l2fwd, there is no long option that take advantage of this new
mechanism as --mac-updating and --no-mac-updating are directly setting a
flag without needing an entry in the switch/case.
So this patch just prepares the framework in case a new long option is
added in the future.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
As it gets killed, in SIGINT signal handler, device is not stopped
and closed. In virtio's case, vector assignment in the KVM is not
deassigned.
This patch will invoke dev_stop() and dev_close() in signal handler.
Fixes: d7937e2e3d ("power: initial import")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
To support those devices that do not provide packet type info when
receiving packets, add a new option, --parse-ptype, to analyze
packet type in the Rx callback.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
when "TAILQ_INIT()" was added to the loop of "for (lcore_id = 0; ...)"
statement, the assignment to "lcore_ids" was removed out of the loop.
It changed the original initialization of "lcore_ids".
Fix it by introducing two braces.
Fixes: 45657a5c68 ("examples/vhost: use tailq to link vhost devices")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
When calculating 'nr_mbufs_per_core', 'MAX_PKT_BURST' was mutiplied
twice. Fix it by removing one of them.
Fixes: bdb19b771e ("examples/vhost: fix mbuf allocation failure")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Make all DPDK python application compliant with the PEP8 standard
to allow for consistency checking of patches and to allow further
refactoring.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Function pcmd_drvinfo_callback uses struct info to get
the ethtool information of each port. Struct info will
store the information of previous port until this
information be updated. This patch fixes this issue.
Fixes: bda68ab9d1 ("examples/ethtool: add user-space ethtool sample application")
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Doing a device information query on a non-PCI device such as
vhost was resulting in the dereferencing of a NULL pointer
(the absent PCI data), causing a segmentation fault.
Fixes: bda68ab9d1 ("examples/ethtool: add user-space ethtool sample application")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Today, all logs whose level is lower than INFO are dropped at
compile-time. This prevents from enabling debug logs at runtime using
--log-level=8.
The rationale was to remove debug logs from the data path at
compile-time, avoiding a test at run-time.
This patch changes the behavior of RTE_LOG() to avoid the compile-time
optimization, and introduces the RTE_LOG_DP() macro that has the same
behavior than the previous RTE_LOG(), for the rare cases where debug
logs are in the data path.
So it is now possible to enable debug logs at run-time by just
specifying --log-level=8. Some drivers still have special compile-time
options to enable more debug log. Maintainers may consider to
remove/reduce them.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
vhost-cuse is removed, update corresponding comments that are still
referencing it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
if machine level CRC extension are available, offload the
hash to machine provide functions e.g. armv8-a CRC extensions
support it
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
For multi-seg mbuf, ip->total_length should be pkt_len subtract
ether len.
Fixes: 4abe471ed6 ("examples/tep_term: implement VXLAN processing")
Signed-off-by: Michael Qiu <qiudayu@chinac.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
l4_len is not fixed, althrough mostly it is a fixed value,
but when guest using iperf to do some tests, the l4_len
will have another 12 bytes optional fields.
Fixes: 2bb43bd435 ("examples/tep_term: add TSO offload configuration")
Signed-off-by: Michael Qiu <qiudayu@chinac.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Add an option, --dequeue-zero-copy, to enable dequeue zero copy.
One thing worth noting while using dequeue zero copy is the nb_tx_desc
has to be small enough so that the eth driver will hit the mbuf free
threshold easily and thus free mbuf more frequently.
The reason behind that is, when dequeue zero copy is enabled, guest Tx
used vring will be updated only when corresponding mbuf is freed. If mbuf
is not freed frequently, the guest Tx vring could be starved.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
When sending packets from virtual machine which in need of TSO
by hardware NIC, the inner L4 checksum is not correct on the
other side of the cable.
It's because get_psd_sum() depends on PKT_TX_TCP_SEG to calculate
pseudo-header checksum, but currently this bit is set after the
function get_psd_sum() is called. The fix is straightforward.
Move the bit setting before get_psd_sum() is called.
Fixes: a50245ede7 ("examples/tep_term: initialize VXLAN sample")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Based on previous fix of offload on VXLAN using i40e, applications
need to set proper tunneling type on ol_flags so that i40e driver
can pass it to NIC.
Fixes: a50245ede7 ("examples/tep_term: initialize VXLAN sample")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
l2fwd could be useful for testing virtual devices without the need
of physical ones.
To achieve this, this patch adds a new option to enable/disable the
MAC addresses updating done at forwarding time: --[no-]mac-updating
It enables the use of l2fwd for basic VM to VM communication.
By default, MAC address updating remains enabled, to keep consistency
with previous usage.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The app_worker_thread() and app_mixed_thread() use rte_ring_sc_dequeue_bulk
to dequeue packets from the ring and this imposes restriction on number of
packets in software ring to be greater than the specified value to start
actual dequeue operation, thus, adds latency to those packets. Therefore,
rte_ring_sc_dequeue_bulk is replaced with rte_ring_sc_dequeue_burst.
Fixes: de3cfa2c98 ("sched: initial import")
Suggested-by: Tao Y Yang <tao.y.yang@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
To illustrate the TAP port usage, the sample configuration file with
passthrough pipeline connected to TAP interface is added.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The TAP port support is added to ip_pipeline app. To parse
configuration file with TAP port entries, parsing function is implemented.
The TAP ports configuration check and initialization routines have been
included in application code.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
There is typo in init.c of ip_pipeline example due to which,
invalid file path is added to -d option of EAL i.e path starting
with =.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The network_layers configuration file (config/network_layers.cfg)
demonstrates the various network layer components such as TCP, UDP,
ICMP etc, which can be easily integrated into ip pipeline
infrastructure.
The loopback function (implemented using passthrough pipeline) is
updated to perform swap operation on the IP source and destination
address, and UDP source and destination ports.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Pass-through pipeline is updated with addition of packet fields swap
action. To enable swap action, new entry i.e 'swap' is required in
the passthrough pipeline section of the configuration file, and this
entry contains the offsets (in bytes) of the packet fields to be
swapped.
Each swap entry specifies the pair of packet fields offsets to be
swapped. Therefore, to perform swap action on more than one pair of
packets fields, separate swap entries, each one responsible for unique
pair of packet fields are needed.
Following illustrates the pass-through pipeline configuration that
swaps the source and destination addresses of the mac and tcp
ports of the received packets.
[EAL]
log_level = 0
[PIPELINE0]
type = MASTER
core = 0
[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
swap = 256 262; MACDST <-> MACSRC
;swap = 282 286; IPSRC <-> IPDST
swap = 290 292; PORTSRC <-> PORTDST
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The default value of ``file_name`` parameter of the source port structure is
changed from ``NULL`` to ``./config/packets.pcap``.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch initializes the salt value used by the following cipher
algorithms:
- CBC: random salt
- GCM/CTR: the key required is 20B, and the last 4B are used as salt.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Introduce a specific cryptodev queue size macro.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Application will segfault if there is IPv4 or IPv6 and no SP/ACL rules
for IPv4 or IPv6 respectively.
Avoid checking the ACL/SP in such cases.
Fixes: 906257e965 ("examples/ipsec-secgw: support IPv6")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
RFC3686: Using AES Counter (CTR) Mode With IPsec ESP.`
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for AES-GCM (Galois-Counter Mode).
RFC4106: The Use of Galois-Counter Mode (GCM) in IPSec ESP.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
NIST SP800-38A recommends two methods to generate unpredictable IVs
(Initilisation Vector) for CBC mode:
1) Apply the forward function to a nonce (ie. counter)
2) Use a FIPS-approved random number generator
This patch implements the first recommended method by using the forward
function to generate the IV.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch enables ZUC EEA3 cipher algorithm and
ZUC EIA3 authentication algorithm support to
l2fwd-crypto sample application.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch adds two sample configuration files to ipsec-secgw sample
application. The sample configuration files show how to setup
back-to-back systems that would forward traffic through an IPsec
tunnel.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This patch adds the configuration file support to ipsec_secgw
sample application. Instead of hard-coded rules, the users can
specify their own SP, SA, and routing rules in the configuration
file. A command line option "-f" is added to pass the
configuration file location to the application.
Configuration item formats:
SP rule format:
sp <ip_ver> <dir> esp <action> <priority> <src_ip> <dst_ip> \
<proto> <sport> <dport>
SA rule format:
sa <dir> <spi> <cipher_algo> <cipher_key> <auth_algo> <auth_key> \
<mode> <src_ip> <dst_ip>
Routing rule format:
rt <ip_ver> <src_ip> <dst_ip> <port>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
SNOW 3G algorithm has all uppercase letters in its name
and a space between SNOW and 3G, but some references of it
had some lowercase letters or no space.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
