Need to destroy allocated device if application fails to
add new connection or we have fdset failure.
Fixes: acbff5c67e ("vhost: fix crash when exceeding file descriptors")
Fixes: efba12a78d ("vhost: add user callbacks for socket open/close")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The function rte_vlan_insert may allocate a new buffer for the
vlan header and return a different mbuf than originally passed.
In this case, the stored mbuf in txm[] array could point to wrong
buffer.
Fixes: dd856dfcb9 ("virtio: use any layout on Tx")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes the incorrect iv offset calculation.
Fixes: b063e843fa ("crypto/virtio: fix IV physical address")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When device promiscuous mode has already been enabled,
should not return error if user re-enable it.
Fixes: c945e4bf90 ("net/ice: support promiscuous mode")
Cc: stable@dpdk.org
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Variable "status" should be defined as "enum ice_status"
instead of "uint16_t". This patch fixes the issue.
Fixes: c945e4bf90 ("net/ice: support promiscuous mode")
Cc: stable@dpdk.org
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
iavf driver reset the dev_info structure. This action will clear
the setting in core library. This patch fix that issue.
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
At port detach routine after calling the rte_dev_remove()
testpmd performs some cleanup, checking the statuses of
remaining ports and closes the appropriate ones. The port
scanning is based on the new sibling iterator which uses the
invalid (already closed) port for reference. This patch
replaces the foreach iterator and uses the device object for
reference. It is worth to note this cleanup is not needed
for some drivers (at least for mlx5 and probably for others)
and is preserved due to possible compatibility issues.
Fixes: 13302cd5bd ("app/testpmd: use port sibling iterator in device cleanup")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The vring relay thread is created after HW datapath start and is
canceled before HW datapath stop, so we need to take care of the
ring update when the relay thread is not on duty.
Fixes: 4bb531e152 ("net/ifc: support SW assisted VDPA live migration")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
The mediated vring's index should be set as initial value before
enabling HW datapath.
Fixes: 4bb531e152 ("net/ifc: support SW assisted VDPA live migration")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Relay for Tx queue doesn't provide any benefit, since the packet buffer
in Tx queue is read-only, there's no dirty page logging for Tx buffer.
This change further reduces CPU usage and improves throughput.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Setting exact link speed makes sense if auto-negotiation is
disabled. Fixed flag is required to disable auto-negotiation.
Fixes: 88fbedcd5e ("app/testpmd: move speed and duplex parsing in a function")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Using prefix name "ifpga_" for feature and feature_ops data
struct on ifpga base code, which is suggested by Yigit, Ferruh.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
There is two eth group devices in PAC N3000 card,
each eth group include PHY device and MAC device. Exposing
APIs for DPDK PMD driver to access those devices.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
1. Add Altera I2C master device driver
2. Add at24 eeprom driver which is i2c slave device
3. Introducing a new ops for opae_manager: opae_manager_networking_ops.
This ops will include some networking operation by FPGA, like vBNG
operation, MAC ROM operation and so on.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
There is a SPI bus link between A10 FPGA and MAX10 FPGA.
MAX10 is in charge of board management, like power management,
sensors, flash devices.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Get private features attribute like size, id, address after
enumeration, and insert into FEM or Port dedicate list.
when initial the private feature driver, we just compare the
private feature id between the list and feature drivers array
to match the proper drivers.
This patch avoid the hardcore in feature_info array in previous
implementation. and the same time we can use one driver for mulitple
devices which the id is the same.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
clean up code:
1. use opae_memcpy instead of memcpy
2. use opae_memset instead of memset
3. disable opae_adapter_dump by default
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
In many scenarios, AFU is needed searched by name, this
function add the feature.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
AFU can be implemented into many different acceleration
devices, these devices need shared data to store private
information when they are handled by users.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
On xmit side, there should be a check whether BD ring
has free BDs available before transmit a packet to avoid
data corruption and buffer leak issue.
Fixes: 469c6111a7 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Support for SXGMII port has been enabled. It will
depends on boot loader information passed through IERB.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
There was an error at rte_constant_bswap64 while compiling
with big endian toolchain. so fixing it by adding type cast.
Also, rte_pktmbuf_alloc API should be used to allocate mbuf
instead of rte_pktmbuf_raw_alloc to avoid use of stale mbuf
information.
Fixes: 469c6111a7 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
First configure ring with BDs properly then enable
the ring.
Fixes: 469c6111a7 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
The RSS validation function was missing the verifcation that
if RSS is requested on inner packet, the flow must have tunnel data.
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Enable the optic module vendor and part number verification from driver
by setting appropriate flags. Link handling module in conjunction with
FW performs optic module verification.
Without this fix the SFP is powered down and the link doesn't come up,
if module verification is enforced in nvram setting.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The periodic callout function and the interrupt handler both modify the
periodic flags. There is a possible race condition when an application
is going through dev_stop()/dev_start() and an interrupt handler is
invoked. We also need to ensure that periodic polling is not invoked in
interrupt context.
This patch handles such case by using separate variable to check for
interrupt context. Also, atomically load and store the periodic flag
value.
Fixes: 0f6ebeee24 ("net/bnx2x: fix call to link handling periodic function")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
In some cases, DPDK application may send packets
while PMD is going through load or unload flow.
This causes firmware to access invalid/unallocated
memory to process transmit buffer. Which results in
error on PCI bus and chip further blocks access to host,
causing a DMAE timeout.
Fix this issue by installing dummy empty transmit and receive
handlers at the beginning of unload path (rte_eth_dev_stop())
and install actual transmit and receive handlers after successful
load of the PMD port (rte_eth_dev_start()). This way, application
won't be able to send packets while device is going through
load/unload flow.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
There is a race condition while processing RAMROD
completion in fast path queue through interrupt handler
and polling method.
Interrupt handler invoked from actual interrupt event
and from RAMROD processing polling flow may create a
situation where one flow will read and clear a fastpath
interrupt without actually processing the RAMROD completion.
Thus, causing a RAMROD timeout even though HW sent an
completion event.
Fix this by introducing an atomic variable which will be
set only when interrupt handler needs to process RAMROD
completion.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
We allocate DMA memory but never free after using it.
Add function to free DMA memory.
Fixes: b5bf771922 ("bnx2x: driver support routines")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Currently PKT_TX_VLAN and PKT_TX_QINQ mbuf flags are documented as
they are to say packet contains VLAN or QINQ information.
Updating the definition as they are requests from application to
driver to insert VLAN or double VLAN tags into packet.
Fixes: dc6c911c99 ("mbuf: use reserved space for double vlan")
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The pipefail option is not supported in /bin/sh, just in bash/ksh and
similar shells - which means it's there by default on most Linux distros
but not on e.g. FreeBSD. Therefore we check for it's presence before
setting the option, and if it's missing, we upgrade verbosity level if
needed to ensure we never hide any build failures.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Build of test_compressdev.c fails on FreeBSD due to the missing
include of unistd.h, to provide the function usleep.
Fixes: b06aa643ca ("test/compress: add initial unit tests")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
