Including rte_mbuf.h in C++ triggers the following warning as C++ does not
allow implicit casting of a void *.
In file included from test.cpp:1:0:
rte_mbuf.h: In function ‘rte_mbuf_ext_shared_info*
rte_pktmbuf_ext_shinfo_init_helper(void*, uint16_t*,
rte_mbuf_extbuf_free_callback_t, void*)’:
rte_mbuf.h:1349:9: error: invalid conversion
from ‘void*’ to ‘rte_mbuf_ext_shared_info*’ [-fpermissive]
shinfo = RTE_PTR_ALIGN_FLOOR(RTE_PTR_SUB(buf_end,
^
Fixes: a53aa2b9f3be ("mbuf: support attaching external buffer")
Signed-off-by: David Marchand <david.marchand@6wind.com>
Remove version tag from experimental block in linker version scripts
(.map files).
That label is not used by linker and information only. It is useful
for version blocks but not useful for experimental block but confusing.
Removing those labels.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch introduces a new way of attaching an external buffer to a mbuf.
Attaching an external buffer is quite similar to mbuf indirection in
replacing buffer addresses and length of a mbuf, but a few differences:
- When an indirect mbuf is attached, refcnt of the direct mbuf would be
2 as long as the direct mbuf itself isn't freed after the attachment.
In such cases, the buffer area of a direct mbuf must be read-only. But
external buffer has its own refcnt and it starts from 1. Unless
multiple mbufs are attached to a mbuf having an external buffer, the
external buffer is writable.
- There's no need to allocate buffer from a mempool. Any buffer can be
attached with appropriate free callback.
- Smaller metadata is required to maintain shared data such as refcnt.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds new tunnel type for MPLS-in-GRE and MPLS-in-UDP.
MPLS-in-GRE protocol link:
https://tools.ietf.org/html/rfc4023
MPLS-in-UDP protocol link:
https://tools.ietf.org/html/rfc7510
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
VXLAN-GPE enables VXLAN for all protocols. Protocol link:
https://www.ietf.org/id/draft-ietf-nvo3-vxlan-gpe-05.txt
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch introduce new TX offload flags for device that supports
IP or UDP tunneled packet L3/L4 checksum and TSO offload.
It will be used for non-standard tunnels.
The support from the device is for inner and outer checksums on
IPV4/TCP/UDP and TSO for *any packet with the following format*:
<some headers> / [optional IPv4/IPv6] / [optional TCP/UDP] / <some
headers> / [optional inner IPv4/IPv6] / [optional TCP/UDP]
For example the following packets can use this feature:
1. eth / ipv4 / udp / VXLAN / ip / tcp
2. eth / ipv4 / GRE / MPLS / ipv4 / udp
Please note that specific tunnel headers that contain payload length,
sequence id or checksum will not be updated.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add few details to remind TSO flag, checksum flags and header lengths.
The doxygen syntax for MPLS-in-UDP is fixed.
Fixes: d95188551fa1 ("mbuf: introduce new Tx offload flag for MPLS-in-UDP")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When introducing rte_eth_tx_prepare(), the constraints on checksum
pre-filling for Tx offloads were relaxed because implemented in
the PMDs with rte_net_intel_cksum_flags_prepare() helper.
As a consequence, these old requirements are removed for:
- PKT_TX_OUTER_IP_CKSUM
- PKT_TX_IP_CKSUM
- PKT_TX_[L4]_CKSUM
- PKT_TX_TCP_SEG
Not sure SCTP offload is properly implemented though.
A reference to rte_eth_tx_prepare() is added in rte_eth_tx_burst() doc.
Fixes: 609dd68ef14f ("mbuf: enhance the API documentation of offload flags")
Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_ctrlmbuf structure is not used by any example application
in dpdk. Remove it, as announced on the mailing list.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Gcc-8 discovers issue with platform_mempool_ops.
rte_mbuf_pool_ops.c:26:3: error: ‘strncpy’ output truncated before
terminating nul copying as many bytes from a string as its length
[-Werror=stringop-truncation]
strncpy(mz->addr, ops_name, strlen(ops_name));
Since the ops_name is already checked for size, using strncpy
here is unnecessary; just use strcpy.
Fixes: a3acc3144a76 ("mbuf: add pool ops selection functions")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The existing rte_eal_mbuf_default mempool ops can return the compile time
default ops name if the user has not provided command line inputs for
mempool ops name. It will break the logic of best mempool ops as it will
never return platform hw mempool ops.
This patch introduces a new API to just return the user mempool ops only.
Fixes: 8b0f7f434132 ("mbuf: maintain user and compile time mempool ops name")
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add non-EAL libraries to DPDK build. The compat lib is a special case,
along with the previously-added EAL, but all other libs can be build using
the same set of commands, where the individual meson.build files only need
to specify their dependencies, source files, header files and ABI versions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Append the __rte_experimental tag to api calls appearing in the
EXPERIMENTAL section of their libraries version map
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Introduce a new helper for pktmbuf pool, which will allow
the application to optionally specify the mempool ops name
as well.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
This patch add support for various mempool ops config helper APIs.
1.User defined mempool ops
2.Platform detected HW mempool ops (active).
3.Best selection of mempool ops by looking into user defined,
platform registered and compile time configured.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
At present the userdefined mempool ops name overwrites
the default mempool ops name variable in internal_config.
This patch change the logic to maintain the value of
user defined only in the internal config.
The pktmbuf_create_pool is updated to reflect the same ie.
use user defined. If not present than use the default.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
For consistency with the Rx flags, the flags PKT_TX_VLAN_PKT and
PKT_TX_QINQ_PKT are respectively renamed as PKT_TX_VLAN and
PKT_TX_QINQ. The old defines are deprecated but will stay for some time
for compatibility.
Reported-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Do not panic when calling rte_pktmbuf_free(NULL) with mbuf debug
enabled, it is a valid operation.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Reported-by: Keith Wiles <keith.wiles@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
It is unnecessary to cast from void * to struct rte_mbuf *,
the change can make code clearer.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When RTE_MBUF_REFCNT_ATOMIC=n, the decrement of the mbuf reference
counter uses an atomic operation. This is not necessary and impacts
the performance (seen with TRex traffic generator).
We cannot replace rte_atomic16_add_return() by rte_mbuf_refcnt_update()
because it would add an additional check.
Solves this by introducing __rte_mbuf_refcnt_update(), which
updates the reference counter without doing anything else.
Fixes: 8f094a9ac5d7 ("mbuf: set mbuf fields while in pool")
Cc: stable@dpdk.org
Suggested-by: Hanoch Haim <hhaim@cisco.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Many exported headers rely on definitions found in rte_config.h without
including it, as shown by the following command:
grep -L '^#include <rte_config.h>' -- \
$(grep -Rl \
$(sed -n '/^#define \([^ ]\+\).*$/{s//\1/;H;};${x;s/\n//;s/\n/\\|/g;p;}' \
build/include/rte_config.h) \
-- build/include/)
We cannot assume external applications will include rte_config.h on their
own, neither directly nor through a -include parameter like DPDK does
internally.
This not only causes obvious compilation failures that can be reproduced
with check-includes.sh such as:
[...]/rte_memory.h:88:43: error: ‘RTE_CACHE_LINE_SIZE’ was not declared in
this scope
#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
^
It also results in less visible issues, for instance rte_hash_crc.h relying
on RTE_ARCH_X86_64's presence to provide dedicated inline functions.
This patch partially reverts the commit below and adds missing include
lines to the remaining files.
Fixes: f1a7a5c5f404 ("remove include of generated config header")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In virtio, UDP Fragmentation Offload (UFO) includes two parts: host UFO
and guest UFO. Guest UFO means the frontend can receive large UDP
packets, and host UFO means the backend can receive large UDP packets.
This patch supports host UFO and guest UFO for vhost-user.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Update rte_mbuf_sanity_check() to check sanity of data_len and pkt_len
fields. For segmented packets it is supposed that head's pkt_len field
should be the sum of all segments data_len values.
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is no reason to have local variable m2.
Fixes: af75078fece3 ("first public release")
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Update types of variables to correspond to nb_segs type change from
uint8_t to uint16_t.
Fixes: 97cb466d65c9 ("mbuf: use 2 bytes for port and nb segments")
Cc: stable@dpdk.org
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mempool_virt2phy() is renamed to rte_mempool_virt2iova().
The new function has one less parameter because it is unused.
The deprecated function is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add security crypto flags and update mbuf fields to support
IPsec crypto offload for transmitted packets, and to indicate
crypto result for received packets.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
DPDK has support for both sw and hw mempool and
currently user is limited to use ring_mp_mc pool.
In case user want to use other pool handle,
need to update config RTE_MEMPOOL_OPS_DEFAULT, then
build and run with desired pool handle.
Introducing eal option to override default pool handle.
Now user can override the RTE_MEMPOOL_OPS_DEFAULT by passing
pool handle to eal `--mbuf-pool-ops-name=""`.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In order to support more than 256 virtual ports, the field "port"
in rte_mbuf has been increased to 16 bits. The initialization/reset
value of the field "port" should be changed from 0xff to 0xffff
accordingly.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
When calling rte_pktmbuf_alloc_bulk, if there are
not enough objects in the mempool, it returns
a negative value, which should be reflected
in the Doxygen comments.
Fixes: 9ec201f5d6e7 ("mbuf: provide bulk allocation")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
IANA assigns a destination port of 4789 for the VXLAN in the Service
Name and Transport Protocol Port Number Registry. This is mentioned in
RFC 7348.
Fixes: f295a00a2b44 ("mbuf: add definitions of unified packet types")
Cc: stable@dpdk.org
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some PMDs need to know the tunnel type in order to handle advance TX
features. This patch adds a new TX offload flag for MPLS-in-UDP packets.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
rte_pktmbuf_headroom() and rte_pktmbuf_tailroom() should be usable
with any segment, not only with headered ones, so is_header should be 0
when we call for sanity check inside them.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is no need for initializing the complete
packet buffer with zero as the packet data area will be
overwritten by the NIC Rx HW anyway.
The testpmd configures the packet mempool
with around 180k buffers with
2176B size. In existing scheme, the init routine
needs to memset around ~370MB vs the proposed scheme
requires only around ~22MB on 128B cache aligned system.
Useful in running DPDK in HW simulators/emulators,
where millions of cycles have an impact on boot time.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The debug assertions when allocating a raw mbuf are not correct since
commit 8f094a9ac5d7 ("mbuf: set mbuf fields while in pool"),
which triggers a panic when using this function in debug mode
Change the expected number of segments to 1 instead of 0, and
factorize these sanity checks.
Fixes: 8f094a9ac5d7 ("mbuf: set mbuf fields while in pool")
Signed-off-by: Gregory Etelson <gregory@weka.io>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
With GCC 7 we need to explicitly document when we are falling through from
one switch case to another.
Fixes: af75078fece3 ("first public release")
Fixes: 8bae1da2afe0 ("hash: fallback to software CRC32 implementation")
Fixes: 9ec201f5d6e7 ("mbuf: provide bulk allocation")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
