Add em main loop for handling events based on capabilities of the
event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add lpm main loop for handling events based on capabilities of the
event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add service core setup when eventdev and Rx/Tx adapter don't have
internal port capability.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add event eth Rx/Tx adapter setup for both generic and internal port
event device pipelines.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add event device queue and port setup based on event eth Tx adapter
capabilities.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add ethernet port Rx/Tx queue setup for event device which are later
used for setting up event eth Rx/Tx adapters.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add event device configuration based on the capabilities of the
probed event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add infra to split eventdev framework based on event Tx adapter
capability.
If event Tx adapter has internal port capability then we use
`rte_event_eth_tx_adapter_enqueue` to transmitting packets else
we use a SINGLE_LINK event queue to enqueue packets to a service
core which is responsible for transmitting packets.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add framework to enable event device as a producer of packets.
To switch between event mode and poll mode the following options
have been added:
`--mode="eventdev"` or `--mode="poll"`
Allow the user to select the schedule type to be either
RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC or RTE_SCHED_TYPE_PARALLEL
through:
`--eventq-sched="ordered"` or `--eventq-sched="atomic"` or
`--eventq-sched="parallel"`
Allow the user to specify the number of Rx queues to be connected to
event queue using:
`--event-eth-rxqs`
Poll mode is still the default operation mode.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Replace DSW's use of regular DPDK rings (and code for
packing/unpacking control messages into void pointers) with custom
size rings.
In addition to cleaner code, this change allows DSW to support up to
the eventdev API's maximum of 255 ports by tweaking DSW_MAX_PORTS.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Without a git tree, the "guess" script from dpdk-ci will ignore all files
that are referenced in those sections and let a patchset land in any
subtree.
Changes in the EAL, mbuf, mempool... go through the main repository.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Mark librte_meter and librte_sched as being handled in the dpdk-next-qos
subtree.
The packet framework bits go through dpdk-next-pipeline.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Changes on the main test applications should be considered against
subtrees where most of the API changes and development happen:
- testpmd goes through dpdk-next-net as it is mainly about ethdev,
- dpdk-test-compress-perf goes through dpdk-next-crypto since the
compress API goes through this tree,
- dpdk-test-crypto-perf through dpdk-next-crypto,
- dpdk-test-eventdev through dpdk-next-eventdev,
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since Anand is no longer with Intel, Pallavi will replace him
as maintainer.
Signed-off-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Unfortunately due to lack of time, I've been unable to even participate to
flow API discussions for several months. Better make it official since this
is not going to improve anytime soon.
This doesn't mean I won't contribute to rte_flow in the future!
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
The compiler warning is:
from .../drivers/net/ionic/ionic_dev.c:7:
.../drivers/net/ionic/ionic_if.h:202:5: note: ‘rsvd’ declared here
u8 rsvd[62];
^
This has been observed with gcc 4.8.5, newer 9+ compiler are not giving
this warning.
Warning is a reminder to the user that there are some fields in the
struct not initialized with the default value.
But the C standard clarifies that in that case the field value will be
zero and code is aware of this behavior, so no initializing to a default
value is intentional and it is safe to ignore this compiler warning.
Adding '-Wno-missing-field-initializers' compiler flag to disable the
warning.
Reported-by: Anoob Joseph <anoobj@marvell.com>
Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Reported-by: Xueming Zhang <xuemingx.zhang@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Contrary to the -c/-l options, where a logical core runs on the same
physical core in a 1:1 fashion (example: lcore 0 runs on core 0, lcore
16 runs on core 16), the --lcores option makes it possible to select the
physical cores on which runs a logical core.
However the current parsing code still limits the cpuset to the
[0, RTE_MAX_LCORE] range.
Example, before the patch, on a 24 cores system with RTE_MAX_LCORE == 16:
$ ./master/app/testpmd --no-huge --no-pci -m 512 --log-level *:debug \
--lcores 0@16,1@17 -- -i --total-num-mbufs 2048
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 2 on socket 0
EAL: Detected lcore 3 as core 3 on socket 0
EAL: Detected lcore 4 as core 4 on socket 0
EAL: Detected lcore 5 as core 5 on socket 0
EAL: Detected lcore 6 as core 6 on socket 0
EAL: Detected lcore 7 as core 8 on socket 0
EAL: Detected lcore 8 as core 9 on socket 0
EAL: Detected lcore 9 as core 10 on socket 0
EAL: Detected lcore 10 as core 11 on socket 0
EAL: Detected lcore 11 as core 12 on socket 0
EAL: Detected lcore 12 as core 13 on socket 0
EAL: Detected lcore 13 as core 14 on socket 0
EAL: Detected lcore 14 as core 0 on socket 0
EAL: Detected lcore 15 as core 1 on socket 0
EAL: Skipped lcore 16 as core 2 on socket 0
EAL: Skipped lcore 17 as core 3 on socket 0
EAL: Skipped lcore 18 as core 4 on socket 0
EAL: Skipped lcore 19 as core 5 on socket 0
EAL: Skipped lcore 20 as core 6 on socket 0
EAL: Skipped lcore 21 as core 8 on socket 0
EAL: Skipped lcore 22 as core 9 on socket 0
EAL: Skipped lcore 23 as core 10 on socket 0
EAL: Skipped lcore 24 as core 11 on socket 0
EAL: Skipped lcore 25 as core 12 on socket 0
EAL: Skipped lcore 26 as core 13 on socket 0
EAL: Skipped lcore 27 as core 14 on socket 0
EAL: Support maximum 16 logical core(s) by configuration.
EAL: Detected 16 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: invalid parameter for --lcores
We can remove this limitation by using a cpuset_t (which is a more
natural type since this is what gets passed to pthread_setaffinity*
in the end).
After the patch:
$ ./master/app/testpmd --no-huge --no-pci -m 512 --log-level *:debug \
--lcores 0@16,1@17 -- -i --total-num-mbufs 2048
[...]
EAL: Master lcore 0 is ready (tid=7f94217bbc00;cpuset=[16])
EAL: lcore 1 is ready (tid=7f941f491700;cpuset=[17])
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add debug logs to have a trace of unused cores for -c/-l options on
systems with more cores than RTE_MAX_LCORE.
Signed-off-by: David Marchand <david.marchand@redhat.com>
We use this state in control path only for services cores and -c/-l
options.
The value is not updated when using --lcores.
Use the internal helper where needed.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Fix the name of CPU_SETSIZE in hope we can reuse it in other parts of
the dpdk manipulating some rte_cpuset_t.
Fixes: 4dc2b4d2a4 ("eal/windows: add headers for compatibility")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
In the root table, there is some limitation of total number of header
modify actions, 16 or 8 for each. But in other tables, there is no
such strict limitation. In an IPv6 case, the IP fields modifying
will occupy more actions than that in IPv4, so the total support
number should be increased in order to support as many actions as
possible for an IPv6 + TCP packet.
And in the meanwhile, the memory consumption should also be taken
into consideration because sometimes only several actions are needed.
The root table checking could also be done in low layer driver and
the error code will be returned if the actions number is over the
maximal supported value.
Fixes: 0e9d000276 ("net/mlx5: check maximum modify actions number")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The meter suffix flow item pointer restore is not correct to decrease
a fixed value. The incorrect operation will cause incorrect match to
the meter suffix flow, the flow create will fail once the magic number
in the wrong offset memory start with RTE_FLOW_ITEM_TYPE_END.
The pointer should decrease the real offset it increases.
Set the decrease value to the real offset the pointer increases to fix
the issue.
Fixes: 9ea9b049a9 ("net/mlx5: split meter flow")
Cc: stable@dpdk.org
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch adds to MLX5 PMD support of matching on GTP item,
fields msg_type and teid, according to RFC [1].
GTP item validation and translation functions are added and called.
GTP tunnel type is added to supported tunnels.
[1] http://mails.dpdk.org/archives/dev/2019-December/152799.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Previous fix added translation of Rx hash fields to PRM format.
This patch optimizes the fix, to perform value translation only
if value is not zero.
In case value is zero, there is no need to translate it.
Fixes: c3e33304a7 ("net/mlx5: fix setting of Rx hash fields")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The free on completion queue keeps the indices of elts array,
all mbuf stored below this index should be freed on arrival
of normal send completion. In debug version it also contains
an index of completed transmitting descriptor (WQE) to check
queues synchronization.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The new software manged entity is introduced in Tx datapath
- free on completion queue. This queue keeps the information
how many buffers stored in elts array must freed on send
completion. Each element of the queue contains transmitting
descriptor index to be in synch with completion entries (in
debug build only) and the index in elts array to free buffers.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This is preparation step, we are going to store the index
of elts to free on completion in the dedicated free on
completion queue, this patch updates the elts freeing routine
and updates Tx error handling routine to be synced with
coming new queue.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The complete request flag is set once per Tx burst call,
the code of appropriate routine moved to the end of sending
loop. This is preparation step to remove WQE reserved field
usage to store index of elts to free.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add support for reading the firmware version.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add basic, per queue and extended statistics for
RX and TX, both from the adapter and the driver.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add code to manipulate the RSS configuration
used by the adapter.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for managing RX filters based on MAC and VLAN.
Hardware cannot provide the list of filters, thus we keep
a local list.
Add support for promisc and allmulticast modes.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for port start/stop and handle basic features
including MTU and link up/down.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for the notify queue, which is used for events
published by the NIC.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for the admin queue, which is used for most
of the NIC configurations.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Doorbell registers are used by the driver to signal to the NIC
that requests are waiting on the message queues.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Initialize LIFs (Logical Interfaces) which represents
external connections. The NIC can multiplex many LIFs
to a single port, but in most setups, LIF0 is the
primary control for the port.
Create a device for each LIF.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add port management commands that apply to the physical
ports associated with the PCI device, which might be
shared among several logical interfaces.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Register the Pensando ionic PMD (net_ionic) and define initial probe
and remove callbacks with adapter initialization.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add debug options to the config file.
Define macros used for logs and make use of config file options
to enable them.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add makefile and config file options to compile the Pensando ionic PMD.
Add feature and version map file.
Update maintainers file.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
V1000/R1000 processors are using the same PCI ids for the network
device as SNOWYOWL processor but has altered register definitions
for determining the window settings for the indirect PCS access.
Add support to check for this hardware and if found use the new
register values.
Signed-off-by: Selwin Sebastian <selwin.sebastian@amd.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
OCTEON TX2 isn't built for gcc 4.8.5 as the compiler emits
"internal compiler error" on aarch64. This causes the following
build error when OCTEON TX2 EP is enabled:
/usr/bin/ld: cannot find -lrte_common_octeontx2
collect2: error: ld returned 1 exit status
Fixes: 56d46d13f7 ("raw/octeontx2_ep: add build infra and device probe")
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
