Stop forwarding on exit whether all ports are started or not.
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes: b6ea6408fb ("ethdev: store numa_node per device")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Move call to init_fwd_streams from start_port function
to start_packet_forwarding function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add call to fwd_config_setup to init_config.
Add call to fwd_config_setup for corelist, coremask and nbcore setup.
Add call to fwd_config_setup for portlist, portmask and nbport setup.
Add call to fwd_config_setup for rxq, txq, rxd and txd setup.
Remove fwd_config_setup from fwd_config_display.
Call the pkt_fwd_config_display function directly,
and remove the fwd_config_display wrapper function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add new function port_is_bonding_slave
Use this function in stop_port and close_port functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add calls to port_is_forwarding function in stop_port and
close_port functions to check that port is not forwarding.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Do not update forwarding configuration when attaching or detaching a port
Remove checks on test_done variable.
Remove code to update forwarding configuration.
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There are 2 new fake devices for testing PCI infra. All the fake devices
are now identified by non-existing vendor and device IDs so there is no
real driver to bind to them. The testing drivers match those IDs.
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The commit 66819e6 has introduced a dependency on libarchive to be able
to use some tar resources in the unit tests.
It is now an optional dependency because some systems do not have it
installed.
If CONFIG_RTE_APP_TEST_RESOURCE_TAR is disabled, the PCI test will not
be run. When a "configure" script will be integrated, the libarchive
availability could be checked to automatically enable the option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
Recent CPU's can easily wrap around a 32-bit unsigned int in
the mempool perf test. Increase to a 64-bit uint.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Bond device name was too long (grather than 32 signs) that
cause mempool allocation to fail.
Fixes: 92073ef961 ("bond: unit tests")
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
app/test/test_cryptodev.c:
In function ‘create_snow3g_cipher_operation_oop.clone.15’:
x86_64-native-linuxapp-gcc/include/rte_memcpy.h:796:14
error: array subscript is above array bounds.
In test_cryptodev.c:
2429 rte_memcpy(sym_op->cipher.iv.data, iv, iv_len);
When iv_len is declared as 'unsigned int', rte_memcpy evaluates code for
buffer size bigger than 255, but while 'iv' array is 64 bytes long, it
causes 'above array bounds' warning in gcc 4.5 and breaks compilation.
Using uint8_t as a size of copied block prevents to evaluate in rte_memcpy
code for length bigger than 255, causing the problem.
The root of this issue and solution is the same as for commit 2c007ea106
("app/test: fix array overflow warning with gcc 4.5")
Fixes: 9727af14b0 ("app/test: add out-of-place symmetric crypto operations")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
'red_autotest' changed to run only functional tests without test #4 which was
taking ~53 seconds. 'red_autotest' takes ~2[s] now.
'red_perf' has been added to run performance tests only).
'red_all' has been added to run all functional tests (including #4) and
perfromance tests. This reflects current 'red_autotest' behavior.
Other changes:
- machine TSC clock frequency detection takes place only once now.
- timeouts and number of iterations in functional tests have been reduced
in order to shorten test duration.
Signed-off-by: Tomasz Kantecki <tomasz.kantecki@intel.com>
Dumping of devices in a unittest is useless. Instead, test whether
the test has been set up well - i.e. there are no devices.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The SYSFS_PCI_DEVICES is a constant that makes the PCI testing
difficult as it points to an absolute path. We remove using this
constant and introducing a function pci_get_sysfs_path that gives
the same value. However, the user can pass a SYSFS_PCI_DEVICES env
variable to override the path. It is now possible to create a fake
sysfs hierarchy for testing.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The current test_pci is just a single test case that tests the
blacklisting of devices. Rename it to test_pci_blacklist and call it
from the test_pci. The setup and cleanup are moved out of the
test_pci_blacklist entirely to cover all other tests.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The test unregisters all drivers before start. The drivers were stored
into a fixed-sized array. This is inflexible. This patch change this to
utilize a linked list for the same purpose.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
When a more complex resource (a file hierarchy) is needed, packing
every single file as a single resource would be very ineffective. For
that purpose, it is possible to pack the files into a tar archive,
extract it before test from the resource and finally clean up all the
created files.
This patch introduces functions resource_untar and resource_rm_by_tar
to perform those tasks. An example of using those functions is included
as a test.
A new dependency is required to build the app/test: libarchive.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
A resource can be written into the target filesystem by calling
resource_fwrite or resource_fwrite_file. Such file can be created
before a test is started and removed after the test finishes.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
To include resources from other source that the C source code we
can take advantage of the objcopy behaviour, i.e. packing of an
arbitrary file as an object file that is linked to the target program.
A linked object file is always accessible as a pair
extern const char beg_<name>;
extern const char end_<name>;
(extern const char siz_<name>;)
A unit test that packs the resource.c source file is included.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Certain internal mechanisms of DPDK access different file system
structures (e.g. /sys/bus/pci/devices). It is difficult to test
those cases automatically by a unit test when such path is not
hard-coded and there is no simple way how to distribute fake ones
with the current testing environment.
This patch adds a possibility to declare a resource embedded in
the test binary itself. The structure resource cover the generic
situation - it provides a name for lookup and pointers to the
embedded data blob. A resource is registered in a constructor by
the macro REGISTER_RESOURCE.
Some initial tests of simple resources is included and added into
the group_1.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The log history uses rte_mempool. In order to remove the mempool
dependency in EAL (and improve the build), this feature is deprecated.
The ABI is kept but the behaviour is now voided because it seems this
function was not used. The history can be read from syslog.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
prefetch the next packet data address in advance in forwarding loop
for performance improvement.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Enhance the logs related to mbuf pool creation. Display an info level
log when creating the mbuf, and display the error as a string on failure.
After the patch, we have:
[...]
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=331456, \
size=2176, socket=0
EAL: Error - exiting with code: 1
Cause: Creation of mbuf pool for socket 0 failed: Cannot allocate \
memory
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
"port config all txqflags <value>" allows for
specifying txq_flags value in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
"port config all scatter on|off" allows for
controlling rxmode.enable_scatter in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This parameter allows for controlling rxmode.enable_scatter
which in turn allow for multi-segment packet receive tests.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch provides counter mode support to AES-NI multi-buffer library.
The following cipher algorithm is enabled:
- RTE_CRYPTO_CIPHER_AES_CTR
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Removed comparison against $CC in Makefiles as
in cross-compiling mode CC can be a different string
instead of string "gcc"
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
A bug has been detected by valgrind:
Invalid write of size 1
by 0x86ECC76: sprintf (in /usr/lib/libc-2.23.so)
by 0x430B0A: commands_init (in build/app/test)
by 0x42F215: main (in build/app/test)
Address 0x9d72ff2 is 0 bytes after a block of size 1,346 alloc'd
at 0x78C1BD0: malloc (in vgpreload_memcheck-amd64-linux.so)
by 0x430AE4: commands_init (in build/app/test)
by 0x42F215: main (in build/app/test)
The commands buffer is exactly 1346 B long so there is an access just
after the buffer. The sprintf always writes '\0' at the end of the string.
The '#' separator adds 1 B more to each string. This is correct until the
last string is sprinted there. The last one is 1 B longer then expected,
i.e.:
strlen(t->command) + strlen("#") + ONE_FOR_ZERO
Fixes: 727909c592 ("app/test: introduce dynamic commands list")
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The cycles test was wrongly in the group of mempool perf test.
It is moved in parallel test group 1 with timer test.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Adjust memory parameter (--socket-mem) of the autotests
to be able to make fast_test in a constrained environment (e.g. a VM).
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The autotests are too long to be run often.
This patch reduces the needed time of some tests in fast_test.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The LPM performance tests should not be mixed with
functional tests: they are long and show some statistics.
LPM6 functional tests are added to parallel tests.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The log unit test was checking display of low priority messages.
It was not working if RTE_LOG_LEVEL is not RTE_LOG_DEBUG.
It is even easier to see since the default level is INFO (9b9d7ca).
Now the test use ERR and CRIT levels which should be always enabled
while not trigerring syslog output on the console.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rework the mempool test to better indicate where it failed,
and, now that this feature is available, add the freeing of the
mempool after the test is done.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Check the return value of snprintf to ensure that the name of
the object is not truncated.
By the way, update the test to avoid to trigger an error in
that case.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Now that mempool library provide functions to populate with anonymous
mmap'd memory, we can remove this specific code from test-pmd.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Do not use paddr table to store the mempool memory chunks.
This will allow to have several chunks with different virtual addresses.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This commit removes MEMPOOL_IS_CONTIG().
The next commits will change the behavior of the mempool library so that
the objects will never be allocated in the same memzone than the mempool
header. Therefore, there is no reason to keep this macro that would
always return 0.
This macro was only used in app/test.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This commit renames mempool_obj_ctor_t as mempool_obj_cb_t.
In next commits, we will add the ability to populate the
mempool and iterate through objects using the same function.
We will use the same callback type for that. As the callback is
not a constructor anymore, rename it into rte_mempool_obj_cb_t.
The rte_mempool_obj_iter_t that was used to iterate over objects
will be removed in next commits.
No functional change.
In this commit, the API is preserved through a compat typedef.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The rte_pktmbuf_detach() function should decrease refcnt on a direct
buffer as stated in doc/guides/prog_guide/mbuf_lib.rst:
"whenever the indirect buffer is detached, the reference counter on the
direct buffer is decremented."
Signed-off-by: Hiroyuki Mikita <h.mikita89@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_mempool structure is changed, which will cause an ABI change
for this structure. Providing backward compat is not reasonable
here as this structure is used in multiple defines/inlines.
Allow mempool cache support to be dynamic depending on if the
mempool being created needs cache support. Saves about 1.5M of
memory used by the rte_mempool structure.
Allocating small mempools which do not require cache can consume
larges amounts of memory if you have a number of these mempools.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Many drivers provide their own implementation of rte_mbuf_raw_alloc(),
duplicating the code. Introduce a new public function in rte_mbuf to
allocate a raw mbuf (uninitialized).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
While parsing token string there may be several modes:
- fixed single string
- multi-choice single string
- any single string
This patch add one more mode - any multi string.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
CID 13307 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
fixed_size_dest: You might overrun the 128 byte fixed-size string fwd_modes
by copying fwd_eng->fwd_mode_name without checking the length.
Fixes: 769ce6b178 ("app/testpmd: list forwarding engines")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Fix issue reported by Coverity.
Coverity ID 13240
This could cause an immediate crash or incorrect computation.
In search_ip5tuples: An expression which may be zero is used
as a divisor in floating-point arithmetic.
divide_by_zero: In expression (long double)tm / pkt,
division by expression pkt which may be zero has undefined behavior.
Fixes: 26c057ab6c ("acl: new test-acl application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function rte_hash_lookup_multi() was renamed rte_hash_lookup_bulk()
in DPDK 1.4 and was kept as an undocumented alias.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
With LIBRTE_PMD_XENVIRT enabled testpmd is built in a way to ONLY work
in XEN environments.
It will surface as:
PMD: gntalloc: ioctl error
EAL: Error - exiting with code: 1
Cause: Creation of mbuf pool for socket 0 failed
With LIBRTE_PMD_XENVIRT enabled this now tries the xen style grant
table allocation, but falls back gracefully for the normal allocation.
The only thing left in the log will be the
PMD: gntalloc: ioctl error
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
The mempool element size is set to 0, but 4 bytes are written in
my_obj_init():
uint32_t *objnum = obj;
memset(obj, 0, mp->elt_size);
*objnum = i;
Change the MEMPOOL_ELT_SIZE constant to sizeof(uint32_t). This fixes
memory corruptions since we were writing outside of the object
boundaries.
Fixes: 104a92bd02 ("app: add reentrancy tests")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
DPDK/app/test/test_cryptodev.c:
In function 'test_snow3g_encrypted_authentication.clone.3':
DPDK/x86_64-ivshmem-linuxapp-gcc/include/rte_memcpy.h:796:14: error:
array subscript is above array bounds
In lines like:
rte_memcpy(sym_op->cipher.iv.data, iv, iv_len);
when "iv" is 64 bytes long array, and "iv_len" is "unsigned int",
compiler tries to evaluate also a code for array size larger than 255 bytes
long and reports error "array subscript is above array bounds" in line:
rte_memcpy.h:796
rte_mov128((uint8_t *)dst + 128, (const uint8_t *)src + 128);
caused by evaluation to:
rte_mov128((uint8_t *)sym_op->cipher.iv.data + 128, (const uint8_t *)iv
+ 128);
where "iv" is 64 bytes long buffer and "iv + 128" point out of it, gcc 4.5.
Using uint8_t as a size of copied block prevents to evaluate in rte_memcpy
code for length bigger than 255, causing the problem.
Fixes: 8bdf665fe6 ("app/test: add SNOW 3G")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The previous code in func_reentrancy autotest was doing in parallel
something close to:
name = "common_name";
do several times {
obj = allocate_an_object(name) // obj = ring, mempool, hash, lpm, ...
if (obj == NULL && lookup(name) == NULL)
return TEST_FAIL;
}
This code is not safe. For instance:
mempool_create() is called on core 0, it creates a ring. At the same
time on core 1, mempool_create() is called too and the creation of the
ring fails (EEXIST). But the mempool lookup can fail on core 1 if
the mempool is not added in the list by core 0.
This commit fixes the func_reentrancy autotest that now works with all
tested class of objects.
Fixes: 104a92bd02 ("app: add reentrancy tests")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change rte_hash*_create() functions to return NULL and set rte_errno to
EEXIST when the object name already exists. This is the behavior
described in the API documentation in the header file.
These functions were returning a pointer to the existing object in that
case, but it is a problem as the caller did not know if the object had
to be freed or not.
Doing this change also makes the hash API more consistent with the other
APIs (mempool, rings, ...).
Fixes: 916e4f4f4e ("memory: fix for multi process support")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change rte_lpm*_create() functions to return NULL and set rte_errno to
EEXIST when the object name already exists. This is the behavior
described in the API documentation in the header file.
These functions were returning a pointer to the existing object in that
case, but it is a problem as the caller did not know if the object had
to be freed or not.
Doing this change also makes the lpm API more consistent with the other
APIs (mempool, rings, ...).
Fixes: 916e4f4f4e ("memory: fix for multi process support")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The hash test (located in group_2) may require more than 64MB of memory,
especially if the memory is physically fragmented, making the test to
fail. So increase the memory to 128MB to avoid this issue.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Since commit a88ba49e51, values larger than 4 are allowed,
the autotests need to be updated accordingly.
Fixes: a88ba49e51 ("config: fix CPU and memory parameters on IBM POWER8")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
The code for checking and parsing speed/duplex was duplicated.
The new function is also checking the speed/duplex combination.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Added AES and snow3g Authenticated encryption and decryption tests
for out-of-place operations.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
The test application calls printf(...) with the suite->suite_name argument.
The intent (based on whitespace) in the printf is to check suite->suite_name
first and then apply the printf. This doesn't happen due to missing brackets.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Build log:
/root/dpdk/app/test-pmd/cmdline.c:6687:45: error: no member named
's6_addr32' in 'struct in6_addr'
rte_be_to_cpu_32(res->ip_value.addr.ipv6.s6_addr32[i]);
This is caused by macro "s6_addr32" not defined on FreeBSD and testpmd
swap big endian parameter to host endian. Move the swap action to i40e
ethdev will fix this issue.
Fixes: 7b1312891b ("ethdev: add IP in GRE tunnel")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
This patch extends the commands for changing flow director filter's input
set. It adds vlan as a possible filter input field.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch extends commands for changing a flow director filter's input
set. It adds tos, protocol and ttl as filter's input fields, and removes
the words selection from flex payloads.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This test expects that a vdev is instanciated on the command
line. If it's not the case, just skip this part.
Fixes: 4ea3801b32 ("app/test: fix ring unit test")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
For GLIBC < 2.17 it is necessery to add -lrt for linker
from glibc > 2.17 The `clock_*' suite of functions (declared in <time.h>) is now
available directly in the main C library. This affect Ubuntu 12.04 in i686
and other older Linux Distros).
Fixes: 4758404a30 ("mk: fix eal shared library dependencies")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
This patch fixes error #188: enumerated type mixed with another type,
when uint32_t is casted on enum type in icc.
Fixes: 05f1b9c82e ("app/testpmd: add commands for L2 tunnel config")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Comment for "ierrors" counter says that it counts erroneous received
packets. But for some reason "imissed" counter is added to "ierrors"
counter in most drivers.
It is a mistake, because missed packets are obviously not received.
This patch fixes it.
Fixes: 70bdb18657 ("ethdev: add Rx error counters for missed, badcrc and badlen packets")
Fixes: 6bfe648406 ("i40e: add Rx error statistics")
Fixes: 856505d303 ("cxgbe: add port statistics")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Updated ip_pipeline app is using new changes from LPM library
(Increased number of next hops and added new config structure
for LPM IPv4).
Fixes: f1f7261838 ("lpm: add a new config structure for IPv4")
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The bonding PMD in mode 4 puts all enslaved interfaces into promiscuous
mode in order to receive LACPDUs and must filter unwanted packets
after the traffic has been "collected". Allow broadcast and multicast
through so that ARP and IPv6 neighbor discovery continue to work.
Fixes: 46fb436836 ("bond: add mode 4")
Signed-off-by: Eric Kinzie <ekinzie@brocade.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
There are two places that need -lm (test app and librte_sched) and
exactly one that needs -lrt (librte_sched). Add the relevant
DT_NEEDED entries to both, and eliminate the bogus discrepancy
between Linux and BSD EXECENV_LDLIBS wrt these libs.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Added testpmd support to validate zero nb_rxq/nb_txq
changes of ethdev (d505ba8).
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change the fields of outer_mac and inner_mac in struct
rte_eth_tunnel_filter_conf from pointer to struct in order to
keep the code's readability.
Signed-off-by: Xutao Sun <xutao.sun@intel.com>
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The names of function for tunnel port configuration are not
accurate. They're tunnel_add/del, better change them to
tunnel_port_add/del.
The old functions are directly replaced because the API and ABI
compatibility of ethdev are already broken in 16.04.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add the CLIs to support the E-tag operation.
1, Offloading of E-tag insertion and stripping.
2, Forwarding the E-tag packets to pools based on the GRP and E-CID_base.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Add CLIs to config ether type of l2 tunnel, and to enable/disable
a type of l2 tunnel.
Now only e-tag tunnel is supported.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e
are also added.
It is an ABI break but ethdev library is already bumped for 16.04.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enabled CONFIG_RTE_LIBRTE_LPM, CONFIG_RTE_LIBRTE_TABLE,
CONFIG_RTE_LIBRTE_PIPELINE libraries for arm and arm64
TABLE, PIPELINE libraries were disabled due to LPM library dependency.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
-Used architecture agnostic xmm_t to represent 128 bit SIMD variable
-Introduced vect_* API abstraction in app/test to test rte_lpm_lookupx4
API in architecture agnostic way
-Moved rte_lpm_lookupx4 SSE implementation to architecture specific
rte_lpm_sse.h file to accommodate new rte_lpm_lookupx4 implementation
for a different architecture.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch provides the implementation of a NULL crypto PMD, which supports
NULL cipher and NULL authentication operations, which can be chained together
as follows:
- Authentication Only
- Cipher Only
- Authentication then Cipher
- Cipher then Authentication
As this is a NULL operation device the crypto operations which are submitted for
processing are not actually modified and are stored in a queue pairs processed
packets ring ready for collection when rte_cryptodev_burst_dequeue() is called.
The patch also contains the related unit tests function to test the PMDs
supported operations.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch provides the implementation of an AES-NI accelerated crypto PMD
which is dependent on Intel's multi-buffer library, see the white paper
"Fast Multi-buffer IPsec Implementations on Intel® Architecture Processors"
This PMD supports AES_GCM authenticated encryption and authenticated
decryption using 128-bit AES keys
The patch also contains the related unit tests functions
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
Wireless algorithms like Snow3G needs input in bits.
In this patch, changes have been made to incorporate this requirement
in both QAT and SW PMD.
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added new SW PMD which makes use of the libsso SW library,
which provides wireless algorithms SNOW 3G UEA2 and UIA2
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_SNOW3G_UEA2
- RTE_CRYPTO_SYM_AUTH_SNOW3G_UIA2
The SNOW 3G hash and cipher algorithms, which are enabled
by this crypto PMD are implemented by Intel's libsso software
library. For library download and build instructions,
see the documentation included (doc/guides/cryptodevs/snow3g.rst)
The patch also contains the related unit tests function to test the PMD
supported operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch fix the QAT autotest failure when run for multiple times.
it was caused as mbuf was not freed.
Fixes: 202d375c60 (app/test: add cryptodev unit and performance tests)
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
As cryptodev library does not depend on mbuf_offload library
any longer, this patch removes it.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch modifies the crypto burst enqueue/dequeue APIs to operate on bursts
rte_crypto_op's rather than the current implementation which operates on
rte_mbuf bursts, this simplifies the burst processing in the crypto PMDs and the
use of crypto operations in general, including new functions for managing
rte_crypto_op pools.
These changes continues the separation of the symmetric operation parameters
from the more general operation parameters, which will simplify the integration
of asymmetric crypto operations in the future.
PMDs, unit tests and sample applications are also modified to work with the
modified and new API.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch splits symmetric specific definitions and
functions away from the common crypto APIs to facilitate the future extension
and expansion of the cryptodev framework, in order to allow asymmetric
crypto operations to be introduced at a later date, as well as to clean the
logical structure of the public includes. The patch also introduces the _sym
prefix to symmetric specific structure and functions to improve clarity in
the API.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
