The tx_checksum command concerns outer IP checksum, not VxLAN checksum.
Actually there is no checkum in VxLAN header, there is one checksum in
outer IP header, and one checksum in outer UDP header. This option only
controls the outer IP checksum.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Add a new command related to csum forward engine:
csum parse-tunnel (on|off) (tx_port_id)
If enabled, the tunnel packets received by the csum forward engine are
parsed and seen as "outer-headers/inner-headers/data".
If disabled, the parsing of the csum forward engine stops at the first
l4 layer. A tunnel packet is seens as "headers/data" (inner headers are
included in payload).
Note: the port argument is the tx_port. It's more coherent compared
to all other testpmd csum flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Function to get rx/tx port configuration from the PMDs
was added in previous release to simplify the port configuration
in all sample apps, but testpmd was not modified.
This patch makes testpmd get the default rx/tx port configuration,
but still uses the parameters passed by the command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
There were two static functions called "parse_item_list" in testpmd app.
Since one was a superset of the functionality of the other, we can
collapse the two calls down into a single one, shared between the two
C files.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Use endianness detection factorized in EAL.
The comment about arpa/inet.h is not valid anymore since
commit d07180f211 ("net: fix conflict with libc").
The macro _htons could also be moved in rte_byteorder.h
by providing some constant byte swapping.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Add two new commands in testpmd:
- tso set <segsize> <portid>
- tso show <portid>
These commands can be used enable TSO when transmitting TCP packets in
the csum forward engine. Ex:
set fwd csum
tx_checksum set ip hw 0
tso set 800 0
start
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The csum forward engine was becoming too complex to be used and
extended (the next commits want to add the support of TSO):
- no explaination about what the code does
- code is not factorized, lots of code duplicated, especially between
ipv4/ipv6
- user command line api: use of bitmasks that need to be calculated by
the user
- the user flags don't have the same semantic:
- for legacy IP/UDP/TCP/SCTP, it selects software or hardware checksum
- for other (vxlan), it selects between hardware checksum or no
checksum
- the code relies too much on flags set by the driver without software
alternative (ex: PKT_RX_TUNNEL_IPV4_HDR). It is nice to be able to
compare a software implementation with the hardware offload.
This commit tries to fix these issues, and provide a simple definition
of what is done by the forward engine:
* Receive a burst of packets, and for supported packet types:
* - modify the IPs
* - reprocess the checksum in SW or HW, depending on testpmd command line
* configuration
* Then packets are transmitted on the output port.
*
* Supported packets are:
* Ether / (vlan) / IP|IP6 / UDP|TCP|SCTP .
* Ether / (vlan) / IP|IP6 / UDP / VxLAN / Ether / IP|IP6 / UDP|TCP|SCTP
*
* The network parser supposes that the packet is contiguous, which may
* not be the case in real life.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
In testpmd the rte_port->tx_ol_flags flag was used in 2 incompatible
manners:
- sometimes used with testpmd specific flags (0xff for checksums, and
bit 11 for vlan)
- sometimes assigned to m->ol_flags directly, which is wrong in case
of checksum flags
This commit replaces the hardcoded values by named definitions, which
are not compatible with mbuf flags. The testpmd forward engines are
fixed to use the flags properly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Test command is added to configure flexible payload
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
test command added to configure flexible mask
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As 40G NIC supports different sizes (128/512/64 entries) of
redirection table from that (128 entries) of 1G and 10G NICs,
support of multiple sizes of redirection table is needed.
It includes,
* Redefine 'struct rte_eth_rss_reta' in ethdev.
- To 'struct rte_eth_rss_reta_entry64' which contains 64
entries and 64 bits mask.
- Array of above new structure can be used for any number of
redirection table entries, as long as the number is multiple
of 64. This is quite flexible for the future expanding of
redirection table.
* Redefinition of relevant interfaces in ethdev.
- Interface of reta update has been redefined with new parameters.
- Interface of reta query has been redefined with new parameters.
* Rework of 1G PMD in igb.
- reta update has been reworked.
- reta query has been reworked.
* Rework of 10G PMD in ixgbe.
- reta update has been reworked.
- reta query has been reworked.
* Rework of 40G PMD (PF only) in i40e.
- reta update has been reworked.
- reta query has been reworked.
* Implement relevant commands in testpmd.
Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Erlu Chen <erlu.chen@intel.com>
Add a new token in "show port" command to dump the extended statistics
of a device. It validates the new xstats framework added in previous commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The offload flags field (ol_flags) was 16-bits and had no further room
for expansion. This patch increases the field size to 64-bits, using up
the remaining reserved space in the single-cache-line mbuf.
NOTE: none of the values for existing flags have been changed, i.e. no
new numbers have been explicitly reserved between existing flag
definitions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The rte_pktmbuf structure was initially included in the rte_mbuf
structure. This was needed when there was 2 types of mbuf (ctrl and
packet). As the control mbuf has been removed, we can merge the
rte_pktmbuf into the rte_mbuf structure.
Advantages of doing this:
- the access to mbuf fields is easier (ex: m->data instead of m->pkt.data)
- make the structure more consistent: for instance, there was no reason
to have the ol_flags field in rte_mbuf
- it will allow a deeper reorganization of the rte_mbuf structure in the
next commits, allowing to gain several bytes in it
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
[Bruce: updated for latest code and new example apps]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The API provides functions to start/stop specific RX/TX queues (see 0748be2).
This change adds command in testpmd to start/stop specific RX/TX queues.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Reviewed-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Huawei Xie <huawei.xie@intel.com>
The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.
Leave the tests for the deprecated function in place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
We usually use testpmd fwd to demonstrate IO forwarding throughput.
For best throughput, it has to assign special parameters to testpmd.
To make it easier to run, now set it as defalut value.
Such parameters are MBUF Mempool Cache and RX/TX threshold registers.
MBCACHE: 250
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Liu <yong.liu@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
The vpmd RX don't accept burst size less than 32.
As vPMD is set =y by default, while default testpmd burst size is 16.
Which will cause RX nothing if not assign burst size correctly.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Liu <yong.liu@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
Take avantage of the .set_mtu ethdev function and make it possible to configure
MTU on devices using testpmd.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
To support i40e, new ops has been added to support setting
port based vlan insertion.
New command 'tx_vlan set pvid port_id vlan_id (on|off)'
has been added in testpmd to configure port based vlan insertion.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
- i40e RSS flags have been added (and enlarged to 64-bit)
- A new configuration of 'uint8_t rss_key_len' has been added in
'struct rte_eth_rss_conf' to support different length of RSS keys.
- In each PMD, only the supported flags are masked.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
This patch adds commands to test the functionality of setting link up and down.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add the command "port config X rss-hash-key key" in the 'testpmd'
application to configure the RSS hash key used to compute the RSS
hash of input [IP] packets received on port X.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Add a new function "rss_hash_conf_get" in the PMD API to retrieve the
current configuration of the RSS functions and/or of the RSS key used
by a NIC to compute the RSS hash of input packets.
The new function uses the existing data structure "rte_eth_rss_conf" for
returning the RSS hash configuration.
2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_conf_get" and the
igb-specific function "eth_igb_rss_hash_conf_get" to retrieve the RSS
hash configuration of ixgbe and igb controllers respectively.
3) Add the command "show port X rss-hash [key]" in the testpmd application
to display the RSS hash configuration of port X.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When starting/stopping ports, a link status check on all available ports is
done. This can be annoying when cables are not plugged at the time.
Default behavior is untouched.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a new specific packet processing engine in the "testpmd" application that
only replies to ARP requests and to ICMP echo requests.
For this purpose, a new "icmpecho" forwarding mode is provided that can be
dynamically selected with the following testpmd command:
set fwd icmpecho
before starting the receipt of packets on the selected ports.
Then, the "icmpecho" engine performs the following actions on all received
packets:
- replies to a received ARP request by sending back on the RX port a ARP
reply with a "sender hardware address" field containing the MAC address
of the RX port,
- replies to a ICMP echo request by sending back on the RX port a ICMP echo
reply, swapping the IP source and the IP destination address in the IP
header,
- otherwise, simply drops the received packet.
When replying to a received packet that was encapsulated into a VLAN tunnel,
the reply is sent back with the same VLAN identifier.
By default, the testpmd configures VLAN header stripping RX option on each
port.
This option is not managed by the icmpecho engine which won't detect
packets that were encapsulated into a VLAN.
To address this issue, the VLAN header stripping option must be previously
switched off with the following testpmd command:
vlan set strip off
When the "verbose" mode has been set with the testpmd command
"set verbose 1", the "icmpecho" engine displays informations about each
received packet.
The "icmpecho" forwarding engine can also be used to simply check port
connectivity at the hardware level (check that cables are well-plugged)
and at the software level (receipt of VLAN packets, for instance).
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit adds a multi-flow traffic generator forwarding engine. In effect,
this forwarding mode functions very similar to the txonly mode, with the
difference that it generates multiple L4 flows.
Signed-off-by: Cyril Chemparathy <cchemparathy@tilera.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit adds a new forwarding mode, in which the source and destination
MAC addresses of packets are swapped before forwarding according to the
port-topology in effect. This has been designed for operation primarily with
--port-topology=loopback.
Signed-off-by: Cyril Chemparathy <cchemparathy@tilera.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Having a function to list forwarding engines helps to show them
in cli help and in parameters usage witout duplicating code.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
This patch adds support for a command-line argument --auto-start (-a). When
running in interactive mode, this allows us to start traffic without user
intervention before dropping to the prompt.
Signed-off-by: Cyril Chemparathy <cchemparathy@tilera.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commits adds a new "loop" option to the --port-topology argument. With
the loop option specified, ingress traffic is simply transmitted back on the
same interface.
Signed-off-by: Cyril Chemparathy <cchemparathy@tilera.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This adds a new forwarding mode to testpmd, whereby it will forward
packets, but on a transmit failure, it will wait a small amount of time
before retrying the transmit again. This mode can be useful in some
cases to set a zero-packet loss rate at the cost of overall throughput,
especially in cases where TX ring size/buffering is constrained, such as
with virtio.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Core support for using the Intel DPDK with Xen Dom0 - including EAL
changes and mempool changes. These changes encompass how memory mapping
is done, including support for initializing a memory pool inside an
already-allocated block of memory.
KNI sample app updated to use KNI close function when used with Xen.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Need to change PCI code to support multiple I/O regions on a single device.
Some devices like VMXNET3 have multiple PCI memory regions, and some
have none.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Intel
