Add graph creation, configuration logic and graph main loop.
This graph main loop is run on every slave lcore and calls
rte_graph_walk() to walk over lcore specific rte_graph.
Master core accumulates and prints graph walk stats of all the
lcore's graph's.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add changes to ethdev port and queue configuration based
on command line parameters for l3fwd graph application.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add graph based l3fwd application skeleton with cmdline
parsing support inline with normal l3fwd.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Change rte_mempool_populate_iova() and rte_mempool_populate_virt() to
return 0 instead of -EINVAL when there is not enough room to store one
object, as it can be helpful for applications to distinguish this
specific case.
As this is an ABI change, use symbol versioning to preserve old
behavior for binary applications.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Currently, shutdown for l3fwd-power application is all over the place
and may or may not happen either in the signal handler or in the main()
function. Fix this so that the signal handler will only set the exit
variable, thereby allowing all of the loops to end properly and proceed
to deinitialize everything.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Currently, if power library initialization fails, only a log message is
displayed. This is suboptimal for a number of reasons, but the main one
is that telemetry mode does not depend on the power library and can
therefore run in environments where l3fwd-power would normally not run
correctly (such as inside a VM). This will lead to attempts to
deinitialize the power library on exit, with a subsequent forced unclean
shutdown of DPDK.
Fix this by only initializing the power library in modes that actually
need it, and change a log message to a failure to initialize.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
In order to avoid potential conflicts, rename the PCI_ADDR
enum value to VDPA_ADDR_PCI in vdpa_addr_type_enum.
All symbols referencing this enum are experimental, so it
does not break API policy.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The macro RTE_MIN can be used in vhost-blk example.
This change implies fixing the sign of used_len as size_t
as defined in vhost_strcpy_pad().
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In order that all queues of pools can receive packets,
add enable-rss argument to change RSS configuration.
Fixes: 6bb97df521 ("examples/vmdq: new app")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
To match the pools/queues configuration, the pools/queues output
should start from VMDQ base queue. This patch fixed the issue.
Fixes: 6bb97df521 ("examples/vmdq: new app")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Add tracepoints at important and mandatory APIs for tracing support.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The two if check does the same task, so removing one.
Coverity issue: 355669
Fixes: 9ad50c29d0 ("examples/ipsec-secgw: add app mode worker")
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Support load distribution in security gateway application using
NIC load distribution feature (Flow Director).
Flow Director is used to redirect the specified inbound ipsec flow
to a specified queue. This is achieved by extending the SA rule syntax
to support specification by adding new action_type of <flow-direction>
to a specified <port_id> <queue_id>.
Signed-off-by: Praveen Shetty <praveen.shetty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add libatomic as a global dependency when compiling for 32-bit using
clang. As we need libatomic for 64-bit atomic ops.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Build fails because '__rte_unused' macro not defined in file, error
produced by 'i686-native-linux-gcc config' but it seems generic issue.
Build error:
.../examples/vm_power_manager/oob_monitor_nop.c:11:13:
error: expected ‘;’ before ‘static’
11 | __rte_unused static float
| ^~~~~~~
| ;
.../examples/vm_power_manager/oob_monitor_nop.c:12:14:
error: unknown type name ‘__rte_unused’
12 | apply_policy(__rte_unused int core)
| ^~~~~~~~~~~~
.../examples/vm_power_manager/oob_monitor_nop.c:18:21:
error: unknown type name ‘__rte_unused’
18 | add_core_to_monitor(__rte_unused int core)
| ^~~~~~~~~~~~
.../examples/vm_power_manager/oob_monitor_nop.c:24:26:
error: unknown type name ‘__rte_unused’
24 | remove_core_from_monitor(__rte_unused int core)
| ^~~~~~~~~~~~
Including 'rte_common.h' header which defines the macro for fix.
Fixes: f2fc83b40f ("replace unused attributes")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The new macro __rte_noreturn, for compiler hinting,
is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_aligned for alignment,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Current l2fwd-event application statically configures adjacent ports as
destination ports for forwarding the traffic.
Add a config option to pass the forwarding port pair mapping which allows
the user to configure forwarding port mapping.
If no config argument is specified, destination port map is not
changed and traffic gets forwarded with existing mapping.
To align port/queue configuration of each lcore with destination port
map, port/queue configuration of each lcore gets modified when config
option is specified.
Ex: ./l2fwd-event -c 0xff -- -p 0x3f -q 2 --config="(0,3)(1,4)(2,5)"
With above config option, traffic received from portid = 0 gets forwarded
to port = 3 and vice versa, similarly traffic gets forwarded on other port
pairs (1,4) and (2,5).
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Andrzej Ostruszka <aostruszka@marvell.com>
Added cpu-crypto fallback option parsing as well as tests for it
Signed-off-by: Mariusz Drost <mariuszx.drost@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reserve minimum number of crypto queues equal to number of ports.
This is to fulfill inline protocol offload requirements.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Make number of buffers in a pool nb_mbuf_in_pool dependent on number
of ports, cores and crypto queues. Add command line option -s which
when used overrides dynamic calculation of number of buffers in a pool.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add driver inbound and outbound worker thread for ipsec-secgw. In driver
mode application does as little as possible. It simply forwards packets
back to port from which traffic was received instructing HW to apply
inline security processing using first outbound SA configured for
a given port. If a port does not have SA configured outbound traffic
on that port will be silently dropped. The aim of this mode is to
measure HW capabilities. Driver mode is selected with single-sa option.
The single-sa option accepts SA index however in event mode the SA
index is ignored.
Example command to run ipsec-secgw in driver mode:
ipsec-secgw -w 0002:02:00.0,ipsec_in_max_spi=128
-w 0002:03:00.0,ipsec_in_max_spi=128 -w 0002:0e:00.0 -w 0002:10:00.1
--log-level=8 -c 0x1 -- -P -p 0x3 -u 0x1 -f aes-gcm.cfg
--transfer-mode event --event-schedule-type parallel --single-sa 0
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add eventmode support to ipsec-secgw. With the aid of event helper
configure and use the eventmode capabilities.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add eventmode helper eh_conf_init and eh_conf_uninit
functions which purpose is to initialize and
uninitialize eventmode helper configuration.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for Rx and Tx internal ports. When internal ports are
available then a packet can be received from eth port and forwarded
to event queue by HW without any software intervention. The same
applies to Tx side where a packet sent to an event queue can by
forwarded by HW to eth port without any software intervention.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In eventmode workers can be drafted differently according to the
capabilities of the underlying event device. The added functions will
receive an array of such workers and probe the eventmode properties to
choose the worker.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add routines to display the eventmode configuration and provide
an overview of the devices used.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add Tx adapter support. The event helper init routine will initialize
the Tx adapter according to the configuration. If Tx adapter config
is not present it will generate a default config.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add Rx adapter support. The event helper init routine will initialize
the Rx adapter according to the configuration. If Rx adapter config
is not present it will generate a default config. If there are enough
event queues available it will map eth ports and event queues 1:1
(one eth port will be connected to one event queue). Otherwise it
will map all eth ports to one event queue.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add event device port-lcore link and specify which event queues should
be connected to the event port. Generate a default config for event
port-lcore links if it is not specified in the configuration. This
routine will check the number of available ports and then create links
according to the number of cores available. This patch also adds a new
entry in the eventmode conf to denote that all queues are to be linked
with every port. This enables one core to receive packets from all
ethernet ports.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add framework for eventmode helper. Event mode involves
initialization of multiple devices like eventdev, ethdev
and etc. Add routines to initialize and uninitialize event
device. Generate a default config for event device if it
is not specified in the configuration. Currently event
helper supports single event device only.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The default flow created would enable security processing on all ESP
packets. If the default flow is created, SA based rte_flow creation
would be skipped.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
GCC 10 defaults to -fno-common, this means a linker error will now be
reported if the same global variable is defined in more than one
compilation unit.
Fixes: be1e533238 ("examples/qos_sched: add TC and queue config flexibility")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
GCC 10 defaults to -fno-common, this means a linker error will now be
reported if the same global variable is defined in more than one
compilation unit.
Fixes: 3d1b33e44a ("examples/eventdev: move common data into pipeline common")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
GCC 10 defaults to -fno-common, this means a linker error will now be
reported if the same global variable is defined in more than one
compilation unit.
Fixes: c19beb3f38 ("examples/vhost_blk: introduce vhost storage sample")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch adds top level SPDX license identifiers for some of the DPDK
source and scripts, where the copyright owners have not yet agreed to
replace the full BSD-3 license plate.
This patch also add SPDX license tag for a file with no
previous license plates. (DPDK is BSD-3)
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Removed redundant function call of 'rte_eth_dev_info_get()' since it has
already been called earlier.
Coverity issue: 349922
Fixes: 2bb43bd435 ("examples/tep_term: add TSO offload configuration")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The NIST test vectors use the string 'PTlen' to denote text lengths
in case of encrypt & decrypt operations. So the same string needs to be
used while parsing PT and CT.
Fixes: 2adb3b4e7e ("examples/fips_validation: fix AES-GCM cipher length parsing")
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch extends creation of inline session to all the algorithms.
Previously the inline session was enabled only for AES-GCM cipher.
Fixes: 3a690d5a65 ("examples/ipsec-secgw: fix first packet with inline crypto")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The name of the static function check_cryptodev_capablity()
is fixed for the word "capability".
There is no functional change.
The same typo is fixed in a comment in ip_fragmentation example.
Fixes: 05fe65eb66 ("test/ipsec: introduce functional test")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The functions to lookup IPv4 and IPv6 were both using opaque
pointers (void *) when they should use a typed pointer instead.
The IP headers are not modified during lookup.
Get rid of unnecessary cast on the return from the function.
Replace complex trigraph expression with simple if to improve
readability.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The initial route setup array is unmodified by the lpm code
and can be made constant. This depends on earlier patch to
fix the rte_lpm6 to use const.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Skip master lcore when assigning cores to rx_queues as it is only used
to print stats.
Fixes: 4ff457986f ("examples/l2fwd-event: add default poll mode routines")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Fix the time of check time of use warning in example code.
Ignore the errno of unlink failure. There are two situations.
The first one is that file doesn't exist the unlink fails and
it's ok to ignore. The second one is that unlink fails to remove
file but the next bind() would fail too.
Coverity issue: 350589, 158663
Fixes: c19beb3f38 ("examples/vhost_blk: introduce vhost storage sample")
Cc: stable@dpdk.org
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add missing BSD-3 license tag to inline fallback testing scripts.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch fixes the cipher len keyword typo.
Fixes: 07f5e45532 ("examples/fips_validation: fix cipher length for AES-GCM")
Suggested-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Since all related queues' interrupts are turned on before epoll, we need
to turn off all the interrupts after wakeup. This patch fixes the issue
of only turning off the interrupted queues.
Fixes: b736d64787 ("examples/l3fwd-power: disable Rx interrupt when waking up")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Liang Ma <liang.j.ma@intel.com>
Tested-by: Liang Ma <liang.j.ma@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
SIGTERM handling is added for graceful application exit.
Useful when application is terminated without specifying
any signal on 'kill' command.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When a VM sends a command through virtio-serial to enable/disable
turbo, it is successfully enabled or disabled, yet the response to the
VM is NACK. This is because all the library frequency change APIs return
1 for success (change in frequency), 0 for success (no change in
frequency) and -1 for failure. However the turbo enable/disable APIs just
return 0 for success and -1 for failure.
Fix the handling of the return code to treat ">= 0" as success, and
send an ACK. Only send NACK when < 0 (failure).
Fixes: 0de94bcac7 ("examples/vm_power: send confirmation cmd to guest")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Lei Yao <lei.a.yao@intel.com>
The return value of the get link function call was not checked, and
could return a negative value indicating a failure. This meant the
link_status of the link being checked is invalid, because the link was
not filled with data. The return value is now checked, and if the return
value is not 0 for success, the loop continues with the next port.
To avoid confusion between variable names, the existing retval variable
is renamed to link_status, to better represent its use.
Coverity issue: 350348
Fixes: c8e6ceeceb ("examples/ioat: add new sample app for ioat driver")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The nb_dq return value from the ioat dequeue is negative in failure
cases, however the variable was an unsigned int, causing the condition
where nb_dq <= 0 to never be true. This is now cast to a signed int,
which will successfully reflect the -1 value to be used in this
conditional check.
Coverity issue: 350342
Coverity issue: 350349
Fixes: 92c981637f ("examples/ioat: handle failure case for ioat dequeue")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
patch checks the return value of function rte_eth_dev_info_get,
if return value is negative error message printed on the console.
Coverity issue: 350361
Fixes: c8e6ceeceb ("examples/ioat: add new sample app for ioat driver")
Cc: stable@dpdk.org
Signed-off-by: Praveen Shetty <praveen.shetty@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This checks the return value from the function
rte_eth_dev_set_vlan_offload.
Coverity issue: 350358
Fixes: bda68ab9d1 ("examples/ethtool: add user-space ethtool sample application")
Cc: stable@dpdk.org
Signed-off-by: Gargi Sau <gargi.sau@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Enable cpu-crypto mode testing by adding dedicated environmental
variable CRYPTO_PRIM_TYPE. Setting it to 'type cpu-crypto' allows
to run test scenario with cpu crypto acceleration.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Add support for CPU accelerated crypto. 'cpu-crypto' SA type has
been introduced in configuration allowing to use abovementioned
acceleration.
Legacy mode is not currently supported.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
AES XTS support is added to fips application. Parse test-vectors
from input files, populate AES XTS tests and prepare AES XTS
operations for fips validation.
Signed-off-by: Abed Kamaluddin <akamaluddin@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Sucharitha Sarananaga <ssarananaga@marvell.com>
Cipher length need to be updated in case of AES-GCM decryption.
Fixes: 4aaad2995e ("examples/fips_validation: support GCM parsing")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Sucharitha Sarananaga <ssarananaga@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Set mbuf ptype in prepare_one_packet() after parsing ether_type.
Use mbuf ptype after to recognize packet's address family.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Introduce SAD cache.
Stores the most recent SA in a per lcore cache.
Cache represents flat array containing SA's indexed by SPI.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Get rid of maximum SP limitation.
Keep parsed SP's into the sorted by SPI value array.
Use binary search in the sorted SP array to find appropriate SP
for a given SPI.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Get rid of maximum SA limitation.
Keep parsed SA's into the sorted by SPI value array.
Use binary search in the sorted SA array to find appropriate SA
for a given SPI.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Integrate ipsec SAD support into secgw app:
1. Use SAD library for inbound SA lookup
2. Changes in struct sa_ctx:
- sa array allocates dynamically depending on number of configured sa
- All SA's are kept one by one without using SPI2IDX
3. SP's userdata now contain index of SA in sa_ctx instead of SPI
4. Get rid of SPI2IDX macro
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Add initial support for librte_ipsec SAD library
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Use RTE_DIM macro to calculate array size.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add graceful teardown that addresses both event mode and poll mode.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add em main loop for handling events based on capabilities of the
event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add lpm main loop for handling events based on capabilities of the
event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add service core setup when eventdev and Rx/Tx adapter don't have
internal port capability.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add event eth Rx/Tx adapter setup for both generic and internal port
event device pipelines.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add event device queue and port setup based on event eth Tx adapter
capabilities.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add ethernet port Rx/Tx queue setup for event device which are later
used for setting up event eth Rx/Tx adapters.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add event device configuration based on the capabilities of the
probed event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add infra to split eventdev framework based on event Tx adapter
capability.
If event Tx adapter has internal port capability then we use
`rte_event_eth_tx_adapter_enqueue` to transmitting packets else
we use a SINGLE_LINK event queue to enqueue packets to a service
core which is responsible for transmitting packets.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add framework to enable event device as a producer of packets.
To switch between event mode and poll mode the following options
have been added:
`--mode="eventdev"` or `--mode="poll"`
Allow the user to select the schedule type to be either
RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC or RTE_SCHED_TYPE_PARALLEL
through:
`--eventq-sched="ordered"` or `--eventq-sched="atomic"` or
`--eventq-sched="parallel"`
Allow the user to specify the number of Rx queues to be connected to
event queue using:
`--event-eth-rxqs`
Poll mode is still the default operation mode.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Mempool ops may register in different order when compiling. The default
ops index is always zero but the wanted ops is ring_mp_mc. This patch
sets best mempool ops before generating mbuf pool to fix this issue.
Fixes: 5194299d6e ("examples/ntb: support more functions")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
If algo is NULL set the status to error and return. This change
prevent crashing of ipsec-secgw application when a specific
cipher/auth/aead algo are not supported by application.
Fixes: 0d547ed037 ("examples/ipsec-secgw: support configuration file")
Cc: stable@dpdk.org
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Always enable implicit release since we don't support explicit release
in datapath.
Master lcore is used only for printing stats so don't allocate event
port for it.
Fix service launch for event device without distributed scheduling.
Fixes: bcb6f841d4 ("examples/l2fwd-event: setup service core")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The soname for each stable ABI version should be just the ABI version major
number without the minor number. Unfortunately both major and minor were
used causing version 20.1 to be incompatible with 20.0.
This patch fixes the issue by switching from 2-part to 3-part ABI version
numbers so that we can keep 20.0 as soname and using the final digits to
identify the 20.x releases which are ABI compatible. This requires changes
to both make and meson builds to handle the three-digit version and shrink
it to 2-digit for soname.
The final fix needed in this patch is to adjust the library version number
for the ethtool example library, which needs to be upped to 2-digits, as
external libraries using the DPDK build system also use the logic in this
file.
Fixes: cba806e07d ("build: change ABI versioning to global")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Ray Kinsella <mdr@ashroe.eu>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Kevin Laatz <kevin.laatz@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Test vectors for AES-GCM need to be populated by using aead member
and not cipher_auth. Using incorrect member would result in failures
when AES-GCM with non-zero AAD is tried.
Bugzilla ID: 360
Fixes: 4aaad2995e ("examples/fips_validation: support GCM parsing")
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Sucharitha Sarananaga <ssarananaga@marvell.com>
Add same tag as other files in this example.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
When searching for raw devices with the correct type, we check the driver
name using strcmp, without first checking that the call to info get
succeeded and assigned a value to that pointer.
If the call to get the device info fails, we can treat it as if the device
didn't match, and continue the loop, so the easiest fix is just to skip the
strcmp if the driver_name is null. [A non-null value from a previous failed
match is ok as it too causes the same behaviour of another loop iteration].
Coverity issue: 350353
Fixes: 2328542ed8 ("examples/ioat: add rawdev copy mode")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
To get the amount of memory needed for stats, we call the xstats_get_names
function with a NULL parameter, which can return -1 on error. This negative
value was not previously handled correctly, so we adjust things to quit the
stats printing routine if this basic call fails.
Coverity issue: 350346
Fixes: 632bcd9b5d ("examples/ioat: print statistics")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
On a failure with the ioat dequeue, -1 is returned, which was not properly
handled. This could lead to out-of-bounds reads on a later loop which
assumed a positive return value. Fix this by treating an error as though a
dequeue of 0 had been encountered.
Coverity issue: 350342
Coverity issue: 350349
Fixes: 2328542ed8 ("examples/ioat: add rawdev copy mode")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Remove trailing blank lines. They serve no purpose and are just
editor leftovers.
These can cause git to complain about whitespace errors during merges.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The mp_client crashes if run on Azure or any system where ethdev
ports are owned. In that case, the tx_buffer and tx_stats for the
real port were initialized correctly, but the wrong port was used.
For example if the server has Ports 3 and 5. Then calling
rte_eth_tx_buffer_flush on any other buffer will dereference null
because the tx buffer for that port was not allocated.
Also:
- the flush code is common enough that it should not be marked
unlikely
- combine conditions to reduce indentation
- avoid unnecessary if() if sent is zero.
Fixes: e2366e74e0 ("examples: use buffered Tx")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mp_server incorrectly allows a port mask that included hidden
ports and which later caused either lost packets or failed initialization.
This fixes explicitly checking that each bit in portmask is a
valid port before using it.
Fixes: 5b7ba31148 ("ethdev: add port ownership")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Matan Azrad <matan@mellanox.com>
With the API and ABI freeze ahead, it will be good to reserve
some bits on the private structure for future use.
Otherwise we will potentially need to maintain two different
private structure during 2020 period.
There is already one use case for those reserved bits[1]
The reserved field should be set to 0 by the user.
[1] https://patches.dpdk.org/patch/63077/
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some versions of pkg-config don't support the --path flag, which is not a
fatal error when building the apps. Without the flag, the makefile just
cannot track the .pc file of DPDK as a dependency of the build. Therefore,
we can ignore the error and suppress it by redirecting to /dev/null the
stderr from that call to pkg-config.
Fixes: 22119c4591 ("examples: use pkg-config in makefiles")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Not all versions of pkg-config in distros have support for the
--define-prefix flag [1], causing errors when building examples manually or
with test-meson-builds.sh script [2].
For the former case, we need to remove the hard-coded use of the flag in
the Makefiles.
For the latter case, the flag is necessary for builds to succeed, so we
skip the tests when it's not present, passing it as part of the pkg-config
command if it is supported.
[1]
CentOS Linux release 7.7.1908 (Core)
pkg-config version 0.27.1
[2]
## Building cmdline
Unknown option --define-prefix
gmake: Entering directory
`...ild-x86-default/install-root/usr/local/share/dpdk/examples/cmdline'
rm -f build/cmdline build/cmdline-static build/cmdline-shared
test -d build && rmdir -p build || true
Unknown option --define-prefix
Unknown option --define-prefix
gcc -O3 main.c commands.c parse_obj_list.c -o build/cmdline-shared
main.c:14:28: fatal error: cmdline_rdline.h: No such file or directory
Fixes: ca9268529d ("examples: support relocated DPDK install")
Fixes: 7f80a2102b ("devtools: test pkg-config file")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: f64adb6714 ("examples/fips_validation: support HMAC parsing")
Cc: stable@dpdk.org
This patch fixes the incorrect mbuf write and digest memory leak in
fips_validation authentication verify.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Add missing BSD license tag to IPsec examples.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Update default configuration of ipsec-secgw:
1.In ep0.cfg change SPI value used by two inbound IPv6 security
policies from 15 to 115 and 16 to 116 to point to existing inbound
SAs. There are no inbound SAs with SPI value 15, 16.
- In ep1.cfg change SPI value used by two outbound IPv6 security
policies from 15 to 115 and 16 to 116 to point to existing outbound
SAs. There are no outbound SAs with SPI value 15, 16. Add missing
priority parameter in two inbound IPv4 security policies.
Fixes: 60a94afefc ("examples/ipsec-secgw: add sample configuration files")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Caught when compiling this example with pkg-config:
## Building l2fwd
...
main.c: In function ‘main’:
main.c:716:3: warning: ‘rte_eth_dev_set_ptypes’ is deprecated: Symbol
is not yet part of stable ABI [-Wdeprecated-declarations]
716 | ret = rte_eth_dev_set_ptypes(portid, RTE_PTYPE_UNKNOWN, NULL,
| ^~~
In file included from main.c:38:
...build-x86-default/install-root/usr/local/include/rte_ethdev.h:2661:5:
note: declared here
2661 | int rte_eth_dev_set_ptypes(uint16_t port_id, uint32_t
ptype_mask,
| ^~~~~~~~~~~~~~~~~~~~~~
ln -sf l2fwd-shared build/l2fwd
Fixes: 9731df2e75 ("examples/l2fwd: disable packet type parsing")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
If there are no ports available to the guest cli application, it will
exit when setting up the default policy because it fails to set the mac
address. This should not be the case, as this example can be used for
many other use cases that do not need ports.
If ports not found, simply set nb_mac_to_monitor in the policy to zero
and continue.
Fixes: 70febdcfd6 ("examples: check status of getting MAC address")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Lei Yao <lei.a.yao@intel.com>
The branch ratio algorithm in the vm_power_manager sample application
can be very sensitive at patricular loads in a workload, causing
oscillations between min and max frequency. For example, if a
workload is at 50%, scaling up may change the ratio
enough that it immediately thinks it needs to scale down again.
This patch introduces a sliding window recording the scale up/down
direction for the last 32 samples, and scales up if any samples indicate
we should scale up, otherwise scale down. Each core has it's own window.
Fixes: 4b1a631b8a ("examples/vm_power: add oob monitoring functions")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since pipeline_generic uses `rte_mbuf:#️⃣:rss` add the new Rx offload
flag `DEV_RX_OFFLOAD_RSS_HASH` to inform PMD to copy the RSS hash result
into the mbuf.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A Vhost-blk example that support inflight feature. It uses the
new APIs that introduced in the first patch, so it can show how these
APIs work to support inflight feature.
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Right now majority of lib mode functional tests enable
library mode with '-w N' option.
It worked till recently, as legacy mode didn't support replay window.
Now it changed.
To fix - use '-l' option to enable library mode explicitly.
Fixes: 9297844520 ("examples/ipsec-secgw: add scripts for functional test")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The rte_security lib has introduced replay_win_sz,
so it can be removed from the rte_ipsec lib.
The relevant tests, app are also update to reflect
the usages.
Note that esn and anti-replay fileds were earlier used
only for ipsec library, they were enabling the libipsec
by default. With this change esn and anti-replay setting
will not automatically enabled libipsec.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
As per RFC4868, SHA-256 should use 128 bits of ICV.
Fixes: b5350285ce ("examples/ipsec-secgw: support SHA256 HMAC")
Cc: stable@dpdk.org
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The example IPsec application does not work properly when using
AES-GCM with crypto_openssl.
ESP with AES-GCM uses standard 96bit long algorithm IV ([1]) which
later concatenated with be32(1) forms a J0 block. GCM specification
([2], chapter 7.1) states that when length of IV is different than
96b, in order to format a J0 block, GHASH function must be used.
According to specification ([2], chapter 5.1.1) GCM implementations
should support standard 96bit IVs, other lengths are optional. Every
DPDK cryptodev supports 96bit IV and few of them supports 128bit
IV as well (openssl, mrvl, ccp). When passing iv::length=16 to a
cryptodev which does support standard IVs only (e.g. qat) it
implicitly uses starting 96 bits. On the other hand, openssl follows
specification and uses GHASH to compute J0 for that case which results
in different than expected J0 values used for encryption/decryption.
Fix an inability to use AES-GCM with crypto_openssl by changing IV
length to the standard value of 12.
[1] RFC4106, section "4. Nonce format" and "3.1. Initialization Vector"
https://tools.ietf.org/html/rfc4106
[2] NIST SP800-38D
https://csrc.nist.gov/publications/detail/sp/800-38d/final
Fixes: 0fbd75a99f ("cryptodev: move IV parameters to session")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add tests for offload fallback feature; add inbound config modificator
SGW_CFG_XPRM_IN (offload fallback setting can be set only for inbound
SAs). Tests are using cryptodev for outbound SA.
To test fragmentation with QAT set:
MULTI_SEG_TEST="--reassemble=4096 --cryptodev_mask=0x5555"
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
Due to fragment loss on highly saturated links and long fragment
lifetime, ipsec-secgw application quickly runs out of free reassembly
buckets. As a result new fragments are being dropped.
Introduce --frag-ttl option which allow user to lower default fragment
lifetime which solves problem of saturated reassembly buckets with high
bandwidth fragmented traffic.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Inline processing is limited to a specified subset of traffic. It is
often unable to handle more complicated situations, such as fragmented
traffic. When using inline processing such traffic is dropped.
Introduce fallback session for inline crypto processing allowing
handling packets that normally would be dropped. A fallback session is
configured by adding 'fallback' keyword with 'lookaside-none' parameter
to an SA configuration. Only 'inline-crypto-offload" as a primary
session and 'lookaside-none' as a fall-back session combination is
supported by this patch.
Fallback session feature is not available in the legacy mode.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
Cleanup ipsec_sa structure by removing every field that is already in
the rte_ipsec_session structure:
* cryptodev/security session union
* action type
* offload flags
* security context
References to abovementioned fields are changed to direct references
to matching fields of rte_ipsec_session structure.
Such refactoring is needed to introduce many sessions per SA feature,
e.g. fallback session for inline offload processing.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
CC l2fwd_event_generic.o
.../l2fwd_event_generic.c: In function
‘l2fwd_rx_tx_adapter_setup_generic’:
.../l2fwd_event_generic.c:203:3: error: missing initializer for field
‘impl_opaque’ of ‘struct <anonymous>’
[-Werror=missing-field-initializers]
}
^
In file included from .../l2fwd_event_generic.c:10:0:
.../include/rte_eventdev.h:1057:12: note: ‘impl_opaque’ declared here
uint8_t impl_opaque;
^
CC l2fwd_event_internal_port.o
.../l2fwd_event_internal_port.c: In function
‘l2fwd_rx_tx_adapter_setup_internal_port’:
.../l2fwd_event_internal_port.c:201:3: error: missing initializer for
field ‘impl_opaque’ of ‘struct <anonymous>’
[-Werror=missing-field-initializers]
}
^
In file included from .../l2fwd_event_internal_port.c:10:0:
.../include/rte_eventdev.h:1057:12: note: ‘impl_opaque’ declared here
uint8_t impl_opaque;
^
Fixes: 50f05aa6ed ("examples/l2fwd-event: setup Rx/Tx adapter")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
The constants like AF_INET are in sys/socket.h in FreeBSD.
The #ifdef macro __FreeBSD__ is replaced with RTE_EXEC_ENV_FREEBSD
in order to be consistent across DPDK files, and allow to grep
for EXEC_ENV among other benefits.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The original patch used incorrect subnet range for testing.
Fixes: 37afe381bd ("examples/l3fwd: use reserved IP addresses")
Cc: stable@dpdk.org
Reported-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add event dev main loop based on enabled l2fwd options and eventdev
capabilities.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Setup service cores for eventdev and Rx/Tx adapter when they don't have
internal port capability.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add event eth Rx/Tx adapter setup for both generic and internal port
event device pipelines.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add event device queue and port setup based on event eth Tx adapter
capabilities.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add infra to split eventdev framework based on event Tx adapter
capability.
If event Tx adapter has internal port capability then we use
`rte_event_eth_tx_adapter_enqueue` to transmitting packets else
we use a SINGLE_LINK event queue to enqueue packets to a service
core which is responsible for transmitting packets.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add infra to select event device as a mode to process packets through
command line arguments. Also, allow the user to select the schedule type
to be RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC or
RTE_SCHED_TYPE_PARALLEL.
Usage:
`--mode="eventdev"` or `--mode="poll"`
`--eventq-sched="ordered"`, `--eventq-sched="atomic"` or
`--event-sched=parallel`
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Send request to power manager for core id provided
by user to get related capabilities.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Send capabilities for requested cores.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Add command and related logic to query CPU frequencies
either for specified CPU or all cores.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Add new command which gives possibility to enable/disable queries
form VM guest.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
On query received from VM guest send CPUs frequencies.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Extend incoming packet reading API with new packet
type which carries CPU frequencies.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
channel_monitor.c was dependent on i40e driver being available.
This is only necessary for the TRAFFIC policy, so use #ifdef's
to not call these when i40e not available.
Fixes: f14791a812 ("examples/vm_power_mgr: add policy to channels")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Use new guest channel API to send confirmation
message for received power command.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Extend vm_power_guest to check incoming confirmations
of messages previously sent to host.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Interrupt will not be received when disabling RX interrupt without
synchronization mechanism sometimes which leads to wake up issue.
Add spinlock to fix it.
Fixes: b736d64787 ("examples/l3fwd-power: disable Rx interrupt when waking up")
Cc: stable@dpdk.org
Signed-off-by: Xiao Zhang <xiao.zhang@intel.com>
Reviewed-by: Marvin Liu <yong.liu@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
The cache-misses problem is very serious when the function
lpm_cb_parse_ptype is called to read the content of packets. That is
because the contents of packages previously stored in the cache are
overwritten by the following instructions or variables.
Thus the prefetch order can be used to prefetch the next packet into
the cache to avoid CPU spending too much time on it.
On Octeon TX platform with built-in NIC, 12% performance gain was
measured by running RFC2544 NDR test with l3fwd. Furthermore, the
cache-misses event of the function lpm_cb_parse_ptype was reduced by
20%, and the CPU task-clock of it dropped from 16.49% to 11.3%, based
on the forwarding test for one minute with the 64B packet.
On the dpaa2 platform, no performance improvement nor drop were seen
with this patch by running RFC2544 NDR test with l3fwd.
On the x86 platform, 15.7% performance gain was measured by running
RFC2544 NDR test with l3fwd.
Signed-off-by: Feifei Wang <feifei.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Added printing stats of ports each second. The stats printing is done
using master core. The information provided informs about packets
received, dropped and send as well as statistics of rawdev devices.
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Added possibility to use two lcores: first for packet receiving and
copying, second for packets sending.
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Added support for copying packets using rawdev device. Each port's Rx queue
is assigned DMA channel for copy.
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Added support for copying packets using software copy mode and MAC address
changing. The copies are processed using one lcore.
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
A new sample app demonstrating use of driver for CBDMA. The app receives
packets, performs software or hardware copy, changes packets' MAC addresses
(if enabled) and forwards them. The change covers ports initialization,
closing connection and argument parsing.
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Building the example with clang gives the error:
error: expression which evaluates to zero treated as a null pointer
constant of type 'const char *' [-Werror,-Wnon-literal-null-conversion]
lcore_id, UINT8);
^~~~~
This error is due to the wrong data type being given for the
cmd_set_cpu_freq_core_num value - it was specified as string rather than
numeric type.
Fixes: f5e5c3347a ("examples/vm_power: cli in guest")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
When adding to the build, add in two missing includes that prevented build
on freebsd, rather than just duplicating the makefile restriction.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Limited to x86_64 systems, as it fails to compile on any others and is
disabled in the examples makefile for non-x86_64 systems.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The warnings about functions not returning values can be removed from the
code by just adding an attribute to the function to specifies it doesn't
return. The GCC bug referenced in the makefile which prevents this from
working has been fixed for >10 years according to bugzilla.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Since the code for the ethtool example was contained in subdirectories the
compilation of this example is different from most of the other apps, and
it had not been abled when the user requests a build with "-Dexamples=all".
To simplify the build with meson, the separate ethtool library is not build
separately, rather the app is built as a single entity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The examples/bpf directory does not contain an example app, but rather
example code for use with testpmd's BPF support. Therefore, we should not
attempt to build it when the user requests "examples=all". This also
synchronises the meson behaviour with make which similarly doesn't compile
up the code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch adds return value checking and error handling for
rte_rawdev_en/dequeue_buffers() and rte_eth_link_get().
Coverity issue: 350247, 350250, 350251, 350252, 350253, 350254
Fixes: 5194299d6e ("examples/ntb: support more functions")
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Starting with kernel version 4.10, there are new min/max MTU values in
net_device structure, which are set to ETH_MIN_MTU and ETH_DATA_LEN by
default. We should be able to change these values to allow MTU more than
1500 to be set on KNI.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This example can be removed because DPDK now has a range
of libraries, especially rte_eventdev, that did not exist
previously for load balancing, making this less relevant.
Also, modern NIC cards have greater ability to do load balancing,
e.g. using RSS, over a wider range of fields than earlier cards did.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Rather than providing a shim layer on top of netmap,
we should instead encourage users to create apps using
the DPDK APIs directly.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Original DPDK rings code had explicit support for a
single watermark per-ring, but more recent releases of
DPDK had a more general mechanism where each enqueue
or dequeue call could return the remaining elements/free-slots
in the ring.
Therefore, this example is not as relevant as before and can be removed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The main l3fwd app should work with both PF and VF devices, so remove the
VF-only l3fwd example.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The example app shows the use of TUN/TAP with DPDK, but DPDK has a built-in
TAP PMD, so this example is obsolete and so can be removed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This example is too old and SPDK will not maintain this example
anymore. Also SPDK has submitted a new vhost example vhost-blk.
We will keep on maintaining vhost-blk and It shows the packed
ring and live recovery support.
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The VXLAN related definitions and structures are moved from
rte_ether.h to a new header file: rte_xvlan.h.
Also introducing a new define macro for VXLAN default port id:
RTE_VXLAN_DEFAULT_PORT
Signed-off-by: Flavia Musatescu <flavia.musatescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Raslan Darawsheh <rasland@mellanox.com>
Get rid of duplicate definitions for rte_mbuf and related macros.
Include rte_mbuf_core.h instead.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Michel Machado <michel@digirati.com.br>
To support high bandwidth network interfaces, all rates (port,
subport level token bucket and traffic class rates, pipe level
token bucket and traffic class rates) and stats counters defined
in public data structures (rte_sched.h) are modified to support
64 bit counters.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Modify qos sample app to allow different subports of the same port
to have different configuration in terms of number of pipes, pipe
queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Modify ip pipeline traffic management function to allow different
subports of the same port to have different configuration in terms
of number of pipes, pipe queue sizes, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Separate initialization of IV, PT and CT according to TDES
ECB and CBC crypto modes
Signed-off-by: Michael Shamis <michaelsh@marvell.com>
Reviewed-by: Marko Kovacevic <marko.kovacevic@intel.com>
Fixes: 70febdcfd6 ("examples: check status of getting MAC address")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch introduces a `flag` in the Eth TX adapter enqueue API.
Some drivers may support burst functionality only with the packets
having same destination device and queue.
The flag `RTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST` can be used
to indicate this so the underlying driver, for drivers to utilize
burst functionality appropriately.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
lcore indexes can't be represented with uint8_t.
Seen on armv8 target:
examples/ntb/ntb_fwd.c: In function ‘cmd_quit_parsed’:
arm64-armv8a-linux-gcc/include/rte_lcore.h:296:8:
error: comparison is always true due to limited range of data type
[-Werror=type-limits]
i<RTE_MAX_LCORE; \
^
examples/ntb/ntb_fwd.c:164:2: note: in expansion of
macro ‘RTE_LCORE_FOREACH_SLAVE’
RTE_LCORE_FOREACH_SLAVE(lcore_id) {
^~~~~~~~~~~~~~~~~~~~~~~
Fixes: 5194299d6e ("examples/ntb: support more functions")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Bare metal support has been gone for quite some time but we still had
some checks on system includes.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Support to transmit files between two systems.
Support iofwd between one ethdev and NTB device.
Support rxonly and txonly for NTB device.
Support to set forwarding mode as file-trans, txonly,
rxonly or iofwd.
Support to show/clear port stats and throughput.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This function is listed under EXPERIMENTAL in the
rte_vhost_version.map, so it needs to be marked
with __rte_experimental in the header file as well.
Found by check-experimental-syms.sh when trying to compile
DPDK with -finstrument-functions. This script didn't
catch this in the normal case, since the function is
declared __rte_always_inline.
This also requires updating the vhost_scsi example to allow
use of this newly marked experimental API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples/ipv4_multicast
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across examples according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so modify usage of these
functions across lib/librte_kni according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/vhost according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/qos_sched according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/flow_filtering according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ori Kam <orika@mellanox.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/flow_classify according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/ipsec-secgw according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
rte_eth_dev_info_get() always fills in device information memory
with zeros on entry.
Fixes: b671987985 ("ethdev: avoid getting uninitialized info for bad port")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update Scapy version requirement from 2.4.3rc1 to 2.4.3, which has been
used because 2.4.2 had a bug which made this version unable to install.
Accept future versions of Scapy too.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
One issue caught by Coverity 343408
*deref_parm: Directly dereferencing parameter val->val.
In writeback_tdes_hex_str(), tmp_val is initialised to null.
tmp_val.val is updated only if keys are found.
If keys are not found,it doesn't fails but continues
to invoke writeback_hex_str(),where val->val is accessed
without null check.
The fix is to return the error,
if keys are not found in writeback_tdes_hex_str().
Coverity issue: 343408
Fixes: 527cbf3d5e ("examples/fips_validation: support TDES parsing")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When sending an encrypted packet which size after encapsulation exceeds
MTU, ipsec-secgw application tries to fragment it. If --reassemble
option has not been set it results with a segmantation fault, because
fragmentation buckets have not been initialized.
Fix crashing by adding extra check if --ressemble option has not been
set and packet exceeds MTU after encapsulation - drop it.
Fixes: b01d1cd213 ("examples/ipsec-secgw: support fragmentation and reassembly")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
IPv6 tunnels are already supported in case of inline and
lookaside none cases. In case of protocol offload, the details
for IPv6 header need to be added in session configuration
for security session create.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
For unknown/unsupported packets, the packet would get checked for inline
offloads after the packet is freed.
Fixes: 0ccfd14bc1 ("examples/ipsec-secgw: support inline protocol")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Check the return value of the rte_eth_dev_rss_hash_conf_get function.
Coverity issue: 344970
Fixes: 3a690d5a65 ("examples/ipsec-secgw: fix first packet with inline crypto")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In APP_MODE_SRTCM_COLOR_AWARE mode, sample app compilation fails
due to wrong meter color type conversion.
error log-
/qos_meter/main.c:error: conversion to incomplete type
(enum rte_meter_color) input_color);
Fixes: c1656328db ("meter: replace color definitions")
Cc: stable@dpdk.org
Reported-by: Yuan Peng <yuan.peng@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The sched library checks the subport tc ov weight value regardless
of whether RTE_SCHED_SUBPORT_TC_OV flag is enabled or not.
This fix allows application to always set valid tc ov weight value.
error log
SCHED: pipe_profile_check: Incorrect value for tc ov weight
SCHED: rte_sched_port_check_params: Pipe profile check failed(-22)
Command "tmgr" failed.
Fixes: 25961ff3bc ("examples/ip_pipeline: add traffic manager object")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Example BPF programs t2.c, t3.c in folder examples/bpf are
failing to compile with latest dpdk.org master.
The reason is changes in some core DPDK header files, that causes
now inclusion of x86 specific headers.
To overcome the issue, minimize inclusion of DPDK header files
into BPF source code.
Bugzilla ID: 321
Fixes: 9dfc06c26a ("test/bpf: add samples")
Cc: stable@dpdk.org
Reported-by: Michel Machado <michel@digirati.com.br>
Suggested-by: Michel Machado <michel@digirati.com.br>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
