Add support to allow user to specific MSS for TCP TSO offload on a per SA
basis. MSS configuration in the context of IPsec is only supported for
outbound SA's in the context of an inline IPsec Crypto offload.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for transmit segmentation offload to inline crypto processing
mode. This offload is not supported by other offload modes, as at a
minimum it requires inline crypto for IPsec to be supported on the
network interface.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch fixes the missing device start for fips validation
sample app.
Bugzilla ID: 842
Fixes: 261bbff75e ("examples: use separate crypto session mempools")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
For current pkt, previous seqhi is used instead of its
guessed seqhi. Fixed it.
Fixes: 5be562bc5b ("crypto/octeontx2: support IPsec ESN and anti-replay")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Currently, the compression block size is 15 by default, which
is the maximum.
Add "log-block-size" devarg to select compression block size manually.
The value provided should be between 4 to 15.
Any out-of-range value will be defaulted to 15.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The mlx5 compress PMD uses HW acceleration for the compress operations.
The mlx5 HW device has no level style mode, which does a tradeoff between
throughput and compression ratio, unlike SW drivers where the CPU is doing
the compress, and more CPU effort can cause a better compression ratio.
The mlx5 driver wrongly defined the Huffman block size configuration
according to the level that doesn't fill the level API requirement for
the tradeoff.
Remove the effect of the level configuration in compress operation.
Fixes: 237aad8824 ("compress/mlx5: fix compression level translation")
Fixes: 39a2c8715f ("compress/mlx5: add transformation operations")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
While creating RSA session, private key length is not being
calculated properly. This is causing bus error on RSA verify.
This patch fix the issue with length calculation.
Fixes: 5a3513caeb ("crypto/cnxk: add asymmetric session")
Cc: stable@dpdk.org
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
This commit fixes uncleared cookies issue when using
RSA algorithm.
Fixes: e2c5f4ea99 ("crypto/qat: support RSA in asym")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This commit fixes not set crypto op status when decrypting
with RSA algorithm.
Fixes: e2c5f4ea99 ("crypto/qat: support RSA in asym")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Update the calculation of the max length needed when converting mbuf to
data vec in partial digest test case. This update make sure the enough
vec buffers are allocated for the appended digest in sgl op for raw
datapath api.
Fixes: 4868f6591c ("test/crypto: add cases for raw datapath API")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This promotes the bbdev interface to stable.
Overdue for some time as bbdev interface has been stable.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for mlx5 crypto pmd on Windows OS.
Add changes to release note and PMD guide.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Remove the check and build failure from crypto/meson.build
in case building for Windows OS.
Add this check/failure in the meson.build file of each crypto PMD
that is not enforcing it to allow PMD support for Windows
per driver when applicable.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The size of the UMR WQE allocated object is decided by a sizof
operation on the struct, however since the struct contains
a union of flexible array members this sizeof results can differ
between compilers.
GCC for example treats the union as 0 sized, MSVC adds a padding
of 16Bits.
To resolve the ambiguity the allocation size will be calculated
by the sizes of the members excluding the flexible union.
Fixes: a1978aa23b ("crypto/mlx5: add maximum segments configuration")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Remove the usage of PTHREAD_MUTEX_INITIALIZER which is not
supported in Windows and initialize priv_list_lock in RTE_INIT.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add needed DV enums used by the crypto PMD and missing
for Windows OS.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The cryptodev library now registers commands with telemetry, and
implements the corresponding callback functions. These commands
allow a list of cryptodevs to be queried, as well as info and stats
for the corresponding cryptodev.
An example usage can be seen below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 21.11.0-rc0", "pid": 1135019, "max_output_len": 16384}
--> /
{"/": ["/", "/cryptodev/info", "/cryptodev/list", "/cryptodev/stats", ...]}
--> /cryptodev/list
{"/cryptodev/list": [0,1,2,3]}
--> /cryptodev/info,0
{"/cryptodev/info": {"device_name": "0000:1c:01.0_qat_sym", \
"max_nb_queue_pairs": 2}}
--> /cryptodev/stats,0
{"/cryptodev/stats": {"enqueued_count": 0, "dequeued_count": 0, \
"enqueue_err_count": 0, "dequeue_err_count": 0}}
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Deprecation notice targeted for 21.11 has been committed with
following as the first commit of the series.
Fixes: b7c9842916 ("interrupts: add allocator and accessors")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
MAE counters can be polled from a control thread if no service core is
allocated for this.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Datapath queue is either Rx or Tx, so just one counter is sufficient
for doorbells. It can count Tx doorbells in the case of Tx queue and
Rx doorbells in the case of Rx queue.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Flex item or flex parser is port infrastructure that allows
application to add support for a custom network header and
offload flows to match the header elements.
Flex item API adds FLEX flow item to RTE flows.
Fixes: dc4d860e8a ("ethdev: introduce configurable flexible item")
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, the logic of the PF and VF initialization codes for multiple
process is the same. A common function can be extracted to initialize
and unload multiple process.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch fixes lack of unregistering MP action for secondary process
when PMD is closed.
Fixes: 9570b1fdbd ("net/hns3: check multi-process action register result")
Fixes: 23d4b61fee ("net/hns3: support multiple process")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The multi-process has the following problems:
1) After a port in primary process is closed, the mp action of the
process is unregistered. Which will cause that other device in the
primary process cannot respond to requests from secondary processes.
2) Because variable "hns3_inited" is set to true without returning an
initial value, the mp action cannot be registered again after it is
unregistered.
3) The mp action of primary and secondary process need to be registered
only once regardless of port numbers in the process. That's what
variable "hns3_inited" does. But the variable is difficult to
understand.
This patch adds a hns3_process_local_data structure to resolve above
problems.
Fixes: 9570b1fdbd ("net/hns3: check multi-process action register result")
Fixes: 23d4b61fee ("net/hns3: support multiple process")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The "secondary_cnt" will be increased when a secondary process
initialized. But the value of this variable is not decreased when the
secondary process exits, which causes the primary process senses that
the secondary process still exists. As a result, the primary process
fails to send messages to the secondary process after the secondary
process exits.
Fixes: 23d4b61fee ("net/hns3: support multiple process")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
It's possible that a switch rule can't be redirect successfully due
to kernel driver is busy to handle an ongoing VF reset, so the
redirect action need to be deferred into next redirect request which
is promised by kernel driver after VF reset done.
This patch uses the saved flow rule's data to replay switch rule
remove/add during next flow redirect.
Fixes: 397b4b3c50 ("net/ice: enable flow redirect on switch")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The VSI number, lookup elements and rule information for creating switch
filter are abandoned when switch filter is created in original
implementation.
This patch saved the abandoned data in RTE flow, it is for future
use on replay when handling exception at flow redirect.
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The order of flow filter parser list was not definite and
linked to the register order of parsers. It caused ACL filter
covered by switch filter in some cases.
This patch fixed order of parser list to guarantee the usage
of each filter. Below lists the order.
ACL filter > Switch filter > FDIR > Hash filter.
Fixes: e4a0a7599d ("net/ice: fix flow priority support in non-pipeline mode")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RTE flow API defines two flow elements types - common and PMD private.
Common RTE flow types are defined in rte_flow.h while PMD private
types exists inside specific PMD only. Application can create a flow
rule with PMD private items or actions. RTE flow API restricts
private PMD types to negative values.
Current implementation tried to use negative PMD private item type
value as index in the rte_flow_desc_item[] array.
The patch allows access to rte_flow_desc_item[] and
rte_flow_desc_action[] arrays to non-private PMD types only.
Fixes: 6cf7204733 ("ethdev: support flow elements with variable length")
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The poll call can return POLLERR which is ignored, or it can return
POLLOUT, even if there are no free frames in the mmap-ed area.
We can account for both of these cases by re-checking if the next
frame is empty before writing into it.
We have attempted to reproduce this issue with pktgen-dpdk, using the
following configuration.
pktgen -l 1-4 -n 4 --proc-type=primary --no-pci --no-telemetry \
--no-huge -m 512 \
--vdev=net_af_packet0,iface=eth1,blocksz=16384,framesz=8192, \
framecnt=2048,qpairs=1,qdisc_bypass=0 \
-- \
-P \
-T \
-m "3.0" \
-f themes/black-yellow.theme
We configure a low tx rate (~ 335 packets / second) and a small
packet size, of about 300 Bytes from the pktgen CLI.
set 0 size 300
set 0 rate 0.008
set 0 burst 1
start 0
After bringing the interface down, and up again, we seem to arrive
in a state in which the tx rate is inconsistent, and does not recover.
ifconfig eth1 down; sleep 7; ifconfig eth1 up
[1] http://code.dpdk.org/pktgen-dpdk/pktgen-20.11.2/source/INSTALL.md
Fixes: 364e08f2bb ("af_packet: add PMD for AF_PACKET-based virtual devices")
Cc: stable@dpdk.org
Signed-off-by: Mihai Pogonaru <pogonarumihai@gmail.com>
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the device and vendor numbers to the PCI ID map so
that a VF can be probed.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The GTP, GTP-U, GTP-C header fields can be matched, however NIC does not
support GTP tunneling so no items after the GTP header can be specified.
If a GTP-U or GTP-C item is specified without a preceding UDP item, the
UDP destination port is implicitly matched. For GTP, the destination UDP
port must be specified but its value is not enforced.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
The function rte_eth_dev_is_removed() was introduced in DPDK 18.02,
and is integrated in error checks of ethdev library.
It is promoted as stable ABI.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable protocol agnostic flow offloading to support raw pattern input
for RSS hash flow rule creation. It is based on Parser Library feature.
Current rte_flow raw API is utilized.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Based on the parser library, we can directly set HW profile and
associate VSI for RSS raw flows. Add symmetric hash configuration
for raw flow.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Probing the availability of Flow Manager API may print the following
error log.
PMD: rte_enic_pmd: Devcmd 88 failed with error code -1
The error indicates a flow manager operation failed and happens when
advanced filtering is disabled on vNIC. It is harmless but confusing
to the user. Since advanced filtering is a prerequisite, check first
if it is available and avoid the error message altogether.
Fixes: ea7768b5bb ("net/enic: add flow implementation based on Flow Manager API")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Changing MTU after the device start causes a segfault in the Rx
handler. The MTU handler (enic_set_mtu) performs the following steps.
1. Stop NIC Rx
2. Change Rx handler '(struct rte_eth_dev)->rx_pkt_burst' to
the dummy handler and sleep a while to quiesce
3. Re-allocate/initialize Rx structures
4. Change Rx handler back to the real handler
(e.g. enic_noscatter_recv_pkts)
enic_set_mtu does not update the recently introduced fast-path pointer
'(struct rte_eth_fp_ops)->rx_pkt_burst'. Since rte_eth_rx_burst only
uses the fast-path pointer, it keeps invoking the real Rx handler, not
the dummy one set by (2). And, (3) causes a segfault in the real Rx
handler (e.g. dereferencing freed structures).
Fix the segfault by updating the fast-path pointer as well.
Fixes: c87d435a4d ("ethdev: copy fast-path API into separate structure")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Add BPHY to the list of platform hardware accelerator blocks.
Fixes: 3d27e49e07 ("raw/cnxk_bphy: add BPHY CGX/RPM skeleton driver")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Generally it is good practice to include all headers that provide APIs
which are being used. This is especially true in situations where 3rd
party apps include our public headers and assume that all should work
out of the box.
Including all headers explicitly helps to achieve that.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Device naming might be misleading which is especially true if one takes
it from lspci output. In order to keep naming consistent keep leading
zero in front of pci bus number.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jakub Palider <jpalider@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Bandwidth profile count is updated in meter capabilities during device
initialization using mbox interface.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch resolves problem with internal header
inclusion. In addition prevents C++ name mangling.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Reviewed-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Handling the case where number of MSIX interrupts are greater
than default value i.e. PLT_MAX_RXTX_INTR_VEC_ID. On PCI probe
device is queried for supported MSIX interrupts, and respective
interrupt resources are reallocated with this value. Same MSIX
count should be used while registering new interrupt vectors.
Fixes: 8cb5d08db9 ("interrupts: extend event list")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix a few typos.
Fixes: fa8f86a14e ("common/cnxk: add build infrastructre and HW definition")
Fixes: f6d567b03d ("common/cnxk: support NIX IRQ")
Fixes: 5e076b609f ("common/cnxk: add SE set key for crypto")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To support lower pps in packet mode we are changing adjust value,
same needs to be consider for burst size calculations.
When both peak and committed rates requested, then peak rate should
be larger than committed rate.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Ingress meter rate is calculated based on hardcoded
policer time unit. Patch adds mbox interface to
retrieve configured policer time unit.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
