After calling unplug function of a bus, the device is expected
to be freed. It is too late for getting devargs to remove.
Anyway, the buses which implement unplug are already freeing
the devargs, except the PCI bus.
So the call to rte_devargs_remove() is removed from EAL and
added in PCI.
Fixes: 2effa126fbd8 ("devargs: simplify parameters of removal function")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
In the devargs syntax for device representors, it is possible to add
several devices at once: -w dbdf,representor=[0-3]
It will become a more frequent case when introducing wildcards
and ranges in the new devargs syntax.
If a devargs string is provided for probing, and updated with a bigger
range for a new probing, then we do not want it to fail because
part of this range was already probed previously.
There can be new ports to create from an existing rte_device.
That's why the check for an already probed device
is moved as bus responsibility.
In the case of vdev, a global check is kept in insert_vdev(),
assuming that a vdev will always have only one port.
In the case of ifpga and vmbus, already probed devices are checked.
In the case of NXP buses, the probing is done only once (no hotplug),
though a check is added at bus level for consistency.
In the case of PCI, a driver flag is added to allow PMD probing again.
Only the PMD knows the ports attached to one rte_device.
As another consequence of being able to probe in several steps,
the field rte_device.devargs must not be considered as a full
representation of the rte_device, but only the latest probing args.
Anyway, the field rte_device.devargs is used only for probing.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The function rte_dev_is_probed() is added in order to improve semantic
and enforce proper check of the probing status of a device.
It will answer this rte_device query:
Is it already successfully probed or not?
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
The PCI mapping requires to know the PCI driver to use,
even before the probing is done. That's why the PCI driver is
referenced early inside the PCI device structure. See
commit 1d20a073fa5e ("bus/pci: reference driver structure before mapping")
However the rte_driver does not need to be referenced in rte_device
before the device probing is done.
By moving back this assignment at the end of the device probing,
it becomes possible to make clear the status of a rte_device.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
The following change set introduces HAVE_VFIO_DEV_REQ_INTERFACE
and used in the below files.
drivers/bus/pci/linux/pci_vfio.c
drivers/bus/pci/pci_common.c
lib/librte_eal/linuxapp/eal/eal_interrupts.c
However, Except the first file, the change missed to include
<rte_vfio.h> where HAVE_VFIO_DEV_REQ_INTERFACE defined.
This creates runtime following error on vfio-pci mode and
kernel >= 4.0.0 combination.
EAL: [rte_intr_enable] Unknown handle type of fd 95
EAL: [pci_vfio_enable_notifier]Fail to enable req notifier.
EAL: Fail to unregister req notifier handler.
EAL: Error setting up notifier!
EAL: Requested device 0000:07:00.1 cannot be used
Fixes: cda94419964f ("vfio: fix build with Linux < 4.0")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
various field of FD structure was getting reset in scattered
fashion. This patch align them in single macro.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This new mode is available in LX2160 platform. The code
dynamically detect the underlying qbman version and choose
the mode at runtime.
Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch add the support for new Management Complex
Firmware version to 10.1x.x. One of the main changes in
the APIs ordered queue.
The fslmc bus lib ABI will need to be bumped to reflect
the MC FW API and structure changes.
This will also result in bumping of ABI verion of all dependent
libs as they internally use the MC FW APIs and structures.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
With this patch, fslmc bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.
This patch impacts mempool/dpaa2, event/dpaa2, net/dpaa2,
raw/dpaa2_cmdif and raw/dpaa2_qdma as they are dependent
on the bus/fslmc and thus impact linkage of libraries.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
With this patch, dpaa bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.
This patch impacts mempool/dpaa, event/dpaa and net/dpaa as
they are dependent on the bus/dpaa and thus impact linkage of
libraries.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
In case RTE_LIBRTE_DPAA2_USE_PHYS_IOVA is enabled, only supported
class is RTE_IOVA_PA.
Fixes: f7768afac101 ("bus/fslmc: support dynamic IOVA")
Cc: stable@dpdk.org
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Since the older kernel version do not implement the device request
interface for vfio, so when build on the kernel < v4.0.0, which is
the version begin to add the device request interface, it will
throw the error to show “VFIO_PCI_REQ_IRQ_INDEX” is undeclared.
This patch aim to fix this compile issue by add the macro
“HAVE_VFIO_DEV_REQ_INTERFACE” after checking the kernel version.
Fixes: 0eb8a1c4c786 ("vfio: add request notifier interrupt")
Fixes: c115fd000c32 ("vfio: handle hotplug request notifier")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When device is be hot-unplugged, the vfio kernel module will sent req
notifier to request user space to release the allocated resources at
first. After that, vfio kernel module will detect the device disappear,
and then delete the device in kernel.
This patch aim to add req notifier processing to enable hotplug for vfio.
By enable the req notifier monitoring and register the notifier callback,
when device be hot-unplugged, the hot-unplug handler will be called to
process hotplug for vfio.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
There are some extended interrupt types in vfio pci device except from the
existing interrupts, such as err and req notifier, they could be useful for
device error monitoring. And these corresponding interrupt handler is
different from the other interrupt handler that register in PMDs, so a new
interrupt handler should be added. This patch will add specific req handler
in generic pci device.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch implements the ops for the PCI bus sigbus handler. It finds the
PCI device that is being hot-unplugged and calls the relevant ops of the
hot-unplug handler to handle the hot-unplug failure of the device.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch implements the ops to handle hot-unplug on the PCI bus.
For UIO PCI, it could avoids BARs read/write errors by creating a
new dummy memory to remap the memory where the failure is. For VFIO
or other kernel driver, it could specific implement function to handle
hot-unplug case by case.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When a device is added with a devargs (hotplug or whitelist),
the bus pointer can be retrieved via its devargs.
But there is no such devargs.bus in case of standard scan.
A pointer to the rte_bus handle is added to rte_device.
When a device is allocated (during a scan),
the pointer to its bus is assigned.
It will make possible to remove a rte_device,
using the function pointer from its bus.
The function rte_bus_find_by_device() becomes useless,
and may be removed later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The function rte_devargs_remove(), which is intended to be internal,
can take a devargs structure as argument.
The matching is still using string comparison of bus name and
device name.
It is simpler and may allow a different devargs matching in future.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The enum names are *_params (plural form).
And the items are also using the plural form: *_PARAMS_*.
It looks more natural to use the singular form *_PARAM_* for items.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
We could match devices by their PCI id (vendor id, device id, etc).
But for now, only matching by PCI address is implemented.
The devargs parameter "id" is renamed "addr" to reflect its real meaning.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
When adding or removing external memory from the memory map, there
may be actions that need to be taken on account of this memory (e.g.
DMA mapping). Add support for triggering callbacks when adding,
removing, attaching or detaching external memory.
Some memory event callback handlers will need additional logic to
handle external memory regions. For example, virtio callback has to
completely ignore externally allocated memory, because there is no
way to find file descriptors backing the memory address in a
generic fashion. All other callbacks have also been adjusted to
handle RTE_BAD_IOVA as IOVA address, as this is one of the expected
use cases for external memory support.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When we allocate and use DPDK memory, we need to be able to
differentiate between DPDK hugepage segments and segments that
were made part of DPDK but are externally allocated. Add such
a property to memseg lists.
This breaks the ABI, so document the change in release notes.
This also breaks a few internal assumptions about memory
contiguousness, so adjust malloc code in a few places.
All current calls for memseg walk functions were adjusted to
ignore external segments where it made sense.
Mempools is a special case, because we may be asked to allocate
a mempool on a specific socket, and we need to ignore all page
sizes on other heaps or other sockets. Previously, this
assumption of knowing all page sizes was not a problem, but it
will be now, so we have to match socket ID with page size when
calculating minimum page size for a mempool.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Previously, to calculate length of memory area covered by a memseg
list, we would've needed to multiply page size by length of fbarray
backing that memseg list. This is not obvious and unnecessarily
low level, so store length in the memseg list itself.
This breaks ABI, so bump the EAL ABI version and document the
change. Also, while we're breaking ABI, pack the members a little
better.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Currently, DPDK will skip mapping some areas (or even an entire BAR)
if MSI-X table happens to be in them but is smaller than page size.
Kernels 4.16+ will allow mapping MSI-X BARs [1], and will report this
as a capability flag. Capability flags themselves are also only
supported since kernel 4.6 [2].
This commit will introduce support for checking VFIO capabilities,
and will use it to check if we are allowed to map BARs with MSI-X
tables in them, along with backwards compatibility for older
kernels, including a workaround for a variable rename in VFIO
region info structure [3].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/
linux.git/commit/?id=a32295c612c57990d17fb0f41e7134394b2f35f6
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/
linux.git/commit/?id=c84982adb23bcf3b99b79ca33527cd2625fbe279
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/
linux.git/commit/?id=ff63eb638d63b95e489f976428f1df01391e15e4
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
The PCI bus can now parse a matching field "id" as follows:
"bus=pci,id=0000:00:00.0"
or
"bus=pci,id=00:00.0"
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Few fields in compat are giving re-defination error
with new drivers such as caam_jr.
Checks have been added.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add supports in bus driver for qbman to support
and configure portal based FDs, which can be used for interrupt
based processing.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The probing functions of NXP buses were missing to set
the driver used for successfully probing a device.
The NXP driver and the generic rte_driver are now set
in the device structures.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The rte_afu_driver is assigned to rte_afu_device.driver during probing.
There is no need of accessing the rte_afu_driver via rte_device.driver
and type casting to its container.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Rosen Xu <rosen.xu@intel.com>
When a secondary process handles VDEV_SCAN_ONE mp action, it is possible
the device is already be inserted. This happens when we have multiple
secondary processes which cause multiple broadcasts from primary during
bus->scan. So we don't need to log any error for -EEXIST.
Bugzilla ID: 84
Fixes: cdb068f031c6 ("bus/vdev: scan by multi-process channel")
Cc: stable@dpdk.org
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Gage Eads <gage.eads@intel.com>
This patch removes the forward declaration of rte_pci_remove_device()
method. In the past, this forward decalaration was needed for
rte_pci_detach(), which is now removed from pci_common.c.
Fixes: e690338a7b85 ("bus/pci: remove unused function to detach by address")
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
This function is not used by netvsc driver yet.
Still the code should handle case where device driver returns
zero (due to rescind).
Coverity issue: 302871
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Use strlcpy rather than strncpy to avoid any issues about
null termination.
Coverity issue 302859
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Fix bug reported by Coverity where directory being scanned was
not closed in error path (leaking file descriptor).
Coverity issue: 302848
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Don't signal host that receive ring has been read until all events
have been processed. This reduces the number of guest exits and
therefore improves performance.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
This reverts commit d4774a568ba0a5923229974a002972c83eb04570.
The patch is incomplete because kernel 4.16+, while being capable
of mapping MSI-X BARs, will also report if such a capability is
available. Without checking this capability, gratuitous errors
are displayed on kernels <4.16 while VFIO is attempting to mmap
MSI-X BAR and fails, which can be confusing to the user.
Fixes: d4774a568ba0 ("vfio: fix workaround of BAR mapping")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch fixes a trivial typo in pci_common.c.
Fixes: 23eaa9059ec2 ("bus/pci: use given name as generic name")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Currently, VFIO will try to map around MSI-X table in the BARs. When
MSI-X table (page-aligned) size is equal to (page-aligned) size of BAR,
VFIO will just skip the BAR.
Recent kernel versions will allow VFIO to map the entire BAR containing
MSI-X tables (*), so instead of trying to map around the MSI-X vector
or skipping the BAR entirely if it's not possible, we can now try
mapping the entire BAR first. If mapping the entire BAR doesn't
succeed, fall back to the old behavior of mapping around MSI-X table or
skipping the BAR.
(*): "vfio-pci: Allow mapping MSIX BAR",
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?id=a32295c612c57990d17fb0f41e7134394b2f35f6
Fixes: 90a1633b2347 ("eal/linux: allow to map BARs with MSI-X tables")
Signed-off-by: Takeshi Yoshimura <t.yoshimura8869@gmail.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Subroutine to unmap VFIO resource is shared by secondary and
primary, and it does not work on the secondary process. Since
for secondary process, it is not necessary to close interrupt
handler, set pci bus mastering and remove vfio_res from
vfio_res_list. So, the patch adds a dedicate function to handle
the situation when a device is unmapped on a secondary process.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
When use memcmp to compare two PCI address, sizeof(struct rte_pci_addr)
is 4 bytes aligned, and it is 8. While only 7 byte of struct rte_pci_addr
is valid. So compare the 8th byte will cause the unexpected result, which
happens when repeatedly attach/detach a device.
Fixes: 94c0776b1bad ("vfio: support hotplug")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The dependency on libuuid is useless because the required code
is embedded in EAL, see commit 6bc67c497a51 ("eal: add uuid API").
Fixes: 831dba47bd36 ("bus/vmbus: add Hyper-V virtual bus support")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
