- Grouped related items using empty lines
- Aligned arguments to same column
- All item comments that doesn't fit same line are placed blow the item
itself
- Moved some comments to same line if overall line < 100 chars
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add comments to describe that not all statistics fields in
struct rte_eth_stats are supported by any type of network
interface card. If any statistics field is not supported,
its value is 0.
Signed-off-by: Wei Dai <wei.dai@intel.com>
add cb_arg parameter to the _rte_eth_dev_callback_process function.
Adding a parameter to this function allows passing information
to the application when an eth device event occurs such as
a VF to PF message.
This allows the application to decide if a particular function
is permitted.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Alex Zelezniak <alexz@att.com>
The vdev eth_ring has been renamed to net_ring.
Some unit tests are using the old name and fail.
Fixes also the vdev comments in EAL and ethdev.
Fixes: 2f45703c17ac ("drivers: make driver names consistent")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
To enable Tx side offload on tunneling packet, driver should set
correct tunneling parameters: (1) EIPT, External IP header type;
(2) EIPLEN, External IP; (3) L4TUNT; (4) L4TUNLEN. This parsing
behavior is based on (ol_flag & PKT_TX_TUNNEL_MASK). And when
it's a tunneling packet, MACLEN defines the outer L2 header.
Also, we define TSO on each kind of tunneling type as a capabilities.
Now only i40e declares to support them.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The "imissed" stats represent RX packets dropped by the HW,
so we should not talk about mbufs as the hardware is not aware
of this structure. Buffer seems to be a better word.
Fixes: 4eadb8ba11b7 ("ethdev: do not deprecate imissed counter")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Now that hotplug has been moved to eal, there is no reason to keep the
device type in this layer.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
crypto and ethdev drivers aligned to PCI probe/remove. These wrappers are
mapped directly to PCI resources.
Existing handlers for init/uninit can be easily reused for this.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked or removed to avoid warnings and compilation failures.
This commit prevents the following errors:
error: type of bit-field `[...]' is a GCC extension
Note: the standard does not require implementations to issue a diagnostic
message with these, and such errors do not occur with recent GCC or clang
versions. However, GCC 4.7 is still common and using the extension keyword
is easier than checking compiler version.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The ethtool app was allocating too little space for 64-bit
registers which resulted in memory corruption.
Removes hard-coded assumption that device registers
are always 32 bits wide. The rte_eth_dev_get_reg_length
and rte_eth_dev_get_reg_info callbacks did not
provide register size to the app in any way while is
needed to allocate correct number of bytes before
retrieving registers using rte_eth_dev_get_reg.
This commit changes rte_eth_dev_get_reg_info so that
it can be used to retrieve both the number of registers
and their width, and removes the now-redundant
rte_eth_dev_get_reg_length.
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Acked-by: Remy Horton <remy.horton@intel.com>
For all drivers that currently implement xstats, the id field in the
rte_eth_stats_name structure equals the entry's array index. This
patch eliminates the redundant id field as a direct index lookup is
faster than a search for the matching id field.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
The old structure rte_eth_xstats contained names and values.
The new structure rte_eth_xstat contains ids and values.
Fixes: bd6aa172cf35 ("ethdev: fetch extended statistics with integer ids")
Fixes: e2aae1c1ced9 ("ethdev: remove name from extended statistic fetch")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Previously, a single VLAN header is treated as inner VLAN,
but generally, a single VLAN header is treated as the outer
VLAN header.
The patch fixes the ether type of a single VLAN type, and
enables configuring inner and outer TPID for double VLAN.
Fixes: 19b16e2f6442 ("ethdev: add vlan type when setting ether type")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
In current i40e codebase, if single VLAN header is added in a packet,
it's treated as inner VLAN. Generally, a single VLAN header is
treated as the outer VLAN header, so update the driver behaviour
appropriately.
Fixes: 19b16e2f6442 ("ethdev: add vlan type when setting ether type")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch enables configuring MTU for i40e.
Since changing MTU needs to reconfigure queue, the port must be
stopped before configuring MTU.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Elements of struct rte_eth_dev used in the fast path.
Make struct rte_eth_dev cache aligned to avoid the cases where
rte_eth_dev elements share the same cache line with other structures.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
- added VXLAN, GENEVE and NVGRE tunnel flow types
- added PORT flow type for accounting physical/virtual
port or channel number in flow creation
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Converted rte_eth_dev_get_port_by_name to a public API.
Converted rte_eth_dev_get_name_by_port to a public API.
The librte_pdump library provides the APIs to enable or disable the
packet capture either using the port id or pci address or device name.
So pdump library need to do a mapping from name to port and port to name
internally to validate the device name and register the Rx and Tx
callbacks for the mapped ports. So these APIs are made public for the
pdump library for doing the mentioned mappings.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The new fields nb_rx_queues and nb_tx_queues are added to the
rte_eth_dev_info structure.
Changes to API rte_eth_dev_info_get() are done to update these new fields
to the rte_eth_dev_info object.
Release notes is updated with the changes.
The librte_pdump library needs to register Rx and Tx callbacks for all
the nb_rx_queues and nb_tx_queues, when application wants to capture the
packets on all the software configured number of Rx and Tx queues of the
device. So far there is no support to get nb_rx_queues and nb_tx_queues
information from the ethdev library. Hence these changes are introduced.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added new public api rte_eth_add_first_rx_callback to add given
callback as head of the list.
The librte_pdump library should display Rx packets of the
NIC even before they are being processed by other callbacks
of the application (because other callbacks of the application
may change the packet data as part of the processing).
So packet capturing framework should register a callback at the
head of the Rx callback list so that callback always gets called
first before any other callbacks of the applications. Hence this API
is introduced.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the test-pmd
and proc_info applications to use the new xstats API, and removes
deprecated code associated with the old API.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the xstats
functions to instead use a numeric identifier rather than a string, and
adds the ability to retrieve identifier-to-string mappings.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Following the discussion on dpdk-users [1], enhance the API
documentation of rte_eth_tx_burst() to specify that the mbufs have to be
allocated from a pool.
[1] http://dpdk.org/ml/archives/users/2016-June/000618.html
Reported-by: Xiaoban Wu <xiaoban_wu@student.uml.edu>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542af4).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This change is to make user code simpler. For PMDs which do not fill any
packet types, return 0 instead of -ENOTSUP as suggested by Bruce.
Usually, users only care if the required (by ptype_mask) ptypes can be
filled by the specified PMD. If the PMD implements dev_supported_ptypes_get
func is not important. And the introduce of another return value (-ENOTSUP)
would increase the complexity of user programs to check it.
Besides, there are ways to know if a PMD implements the func:
a. see doc/guides/nics/overview.rst.
b. use (~1) as parameter ptype_mask, then check if return 0.
Fixes: 78a38edf66de ("ethdev: query supported packet types")
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed capabilities of a device can be retrieved with
rte_eth_dev_info_get().
The new field speed_capa is initialized in the drivers without
taking care of device characteristics in this patch.
When the capabilities of a driver are accurate, the table in
overview.rst must be filled.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Some duplex values are replaced from 0 to half-duplex when link is down.
Some drivers are still using their own constants for duplex modes.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When Linux PF and DPDK VF are used for i40e PMD, when a PF reset occurs,
an interrupt will go via adminq event to inform the VF of the reset.
A callback mechanism is introduced for the VF to allow it to invoke a
registered callback when PF reset happens.
Users can register a callback for this interrupt event using:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds a below event type.
- RTE_ETH_EVENT_QUEUE_STATE
This event will occur when some queues are enabled or disabled.
So far, only vhost PMD supports the event, and it indicates some queues
are enabled or disabled by virtio-net device. Such an event is needed
because virtio-net device may not enable all queues vhost PMD prepare.
Because only vhost PMD uses the event so far, it isn't an actual hardware
interrupt but a simple software event.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Minor modification to event name and comment:
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add a new API rte_eth_dev_get_supported_ptypes to query what packet types
can be filled by a given device. The device should be already started or
its PMD RX burst function already decided, since the packet types supported
may vary depending on RX function.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Ensure that a bonded slave device is not detached,
until it is removed from the bonded device.
Fixes: 2efb58cbab6e ("bond: new link bonding library")
Fixes: a45b288ef21a ("bond: support link status polling")
Fixes: 494adb7f63f2 ("ethdev: add device fields from PCI layer")
Fixes: b1fb53a39d88 ("ethdev: remove some PCI specific handling")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
X550 will do VxLAN & NVGRE RX checksum off-load automatically.
This patch exposes the result of the checksum off-load.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The names of function for tunnel port configuration are not
accurate. They're tunnel_add/del, better change them to
tunnel_port_add/del.
The old functions are directly replaced because the API and ABI
compatibility of ethdev are already broken in 16.04.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add functions to support l2 tunnel configuration and operations.
1, L2 tunnel ether type modification.
It means modifying the ether type of a specific type of tunnel.
So the packet with this ether type will be parsed as this type
of tunnel.
2, Enabling/disabling l2 tunnel support.
It means enabling/disabling the ability of parsing the specific
type of tunnel. This ability should be enabled before we enable
filtering, forwarding, offloading for this specific type of
tunnel.
3, Insertion and stripping for l2 tunnel tag.
4, Forwarding the packets to a pool based on l2 tunnel tag.
Only support e-tag tunnel now.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e
are also added.
It is an ABI break but ethdev library is already bumped for 16.04.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Many sample apps include internal buffering for single-packet-at-a-time
operation. Since this is such a common paradigm, this functionality is
better suited to being implemented in the ethdev API.
The new APIs in the ethdev library are:
* rte_eth_tx_buffer_init - initialize buffer
* rte_eth_tx_buffer - buffer up a single packet for future transmission
* rte_eth_tx_buffer_flush - flush any unsent buffered packets
* rte_eth_tx_buffer_set_err_callback - set up a callback to be called in
case transmitting a buffered burst fails. By default, we just free the
unsent packets.
As well as these, an additional reference callbacks are provided, which
frees the packets:
* rte_eth_tx_buffer_drop_callback - silently drop packets (default
behavior)
* rte_eth_tx_buffer_count_callback - drop and update user-provided counter
to track the number of dropped packets
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Several NICs can handle 512 entries/queues in their RETA table,
an 8 bit field is not large enough for them.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
slow-path data structures need not be 128-byte cache aligned.
Reduce the alignment to 64-byte to save the memory.
No behavior change for 64-byte cache aligned systems as minimum
cache line size as 64.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
