add functions to create mempool, destroy mempool,
dump the options, check the options and print the test result.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
order test has the queue and all types queue variants. Introduce
test_order_common* to share the common code between those tests.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch retrieves the test ops from the given test case name and
invokes the registered test ops callbacks in order and
print the test result.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add an infrastructure for updating the options through
application specific command line arguments.
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Define the test options that used across all test cases and
fill the default values for the same.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
adding common helper functions that used in test framework and
in all the test cases.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add a couple of help functions that will allow parsing many types of
input parameters, i.e.: bool, 16, 32, 64 bits, hex and list of cores etc.
Derived from examples/ip_pipeline/parser.h
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
adding routines to register and retrieve eventdev test cases.
The RTE_INIT based constructor approach has been taken to simplify the test
case registration.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
In order to extend the test framework to realize different use cases,
The ops with function pointer callback scheme has been chosen.
This patch defines the callbacks for each test case.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The dpdk-test-eventdev tool is a Data Plane Development Kit (DPDK)
application that allows exercising various eventdev use cases. This
application has a generic framework to add new eventdev based test cases
to verify functionality and measure the performance parameters of DPDK
eventdev devices.
This patch adds the skeleton of the dpdk-test-eventdev application.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
After test is finished the main thread waits only for lcores
where runners were started because, in case of using the
multicore scheduler, more cores are launched that do not need
to be waited for.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The session mempool pointer is needed in each queue pair,
if session-less operations are being handled.
Therefore, the API is changed to accept this parameter,
as the session mempool is created outside the
device configuration function, similar to what ethdev
does with the rx queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Change crypto device's session management to make it
device independent and simplify architecture when session
is intended to be used on more than one device.
Sessions private data is agnostic to underlying device
by adding an indirection in the sessions private data
using the crypto driver identifier.
A single session can contain indirections to multiple device types.
New function rte_cryptodev_sym_session_init has been created,
to initialize the driver private session data per driver to be
used on a same session, and rte_cryptodev_sym_session_clear
to clear this data before calling rte_cryptodev_sym_session_free.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of creating the session mempool while configuring
the crypto device, apps will create the mempool themselves.
This way, it gives flexibility to the user to have a single
mempool for all devices (as long as the objects are big
enough to contain the biggest private session size) or
separate mempools for different drivers.
Also, since the mempool is now created outside the
device configuration function, now it needs to be passed
through this function, which will be eventually passed
when setting up the queue pairs, as ethernet devices do.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Now that AAD is only used in AEAD algorithms,
there is no need to keep AAD in the authentication
structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since there is a new operation type (AEAD), add parameters
for this in the application.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
AES-GMAC is an authentication algorithm, based on AES-GCM
without encryption. To simplify its usage, now it can be used
setting the authentication parameters, without requiring
to concatenate a ciphering transform.
Therefore, it is not required to set AAD, but authentication
data length and offset, giving the user the option
to have Scatter-Gather List in the input buffer,
as long as the driver supports it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Digest length was duplicated in the authentication transform
and the crypto operation structures.
Since digest length is not expected to change in a same
session, it is removed from the crypto operation.
Also, the length has been shrunk to 16 bits,
which should be sufficient for any digest.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Additional authenticated data (AAD) information was duplicated
in the authentication transform and in the crypto
operation structures.
Since AAD length is not meant to be changed in a same session,
it is removed from the crypto operation structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
For wireless algorithms (SNOW3G, KASUMI, ZUC),
the IV for the authentication algorithms (F9, UIA2 and EIA3)
was taken from the AAD parameter, as there was no IV parameter
in the authentication structure.
Now that IV is available for all algorithms, there is need
to keep doing this, so AAD is not used for these algorithms
anymore.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Authentication algorithms, such as AES-GMAC or the wireless
algorithms (like SNOW3G) use IV, like cipher algorithms.
So far, AES-GMAC has used the IV from the cipher structure,
and the wireless algorithms have used the AAD field,
which is not technically correct.
Therefore, authentication IV parameters have been added,
so API is more correct. Like cipher IV, auth IV is expected
to be copied after the crypto operation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV parameters (offset and length) should not
change for operations in the same session, these parameters
are moved to the crypto transform structure, so they will
be stored in the sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV now is copied after the crypto operation, in
its private size, IV can be passed only with offset
and length.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Usually, IV will change for each crypto operation.
Therefore, instead of pointing at the same location,
IV is copied after each crypto operation.
This will let the IV to be passed as an offset from
the beginning of the crypto operation, instead of
a pointer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Storing a pointer to the user data is unnecessary,
since user can store additional data, after the crypto operation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Use rte_mempool_put_bulk for both latency and throughput tests instead
of rte_crypto_op_free to improve application performance.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add new command to support enable/disable of dedicated Tx/Rx queue on
each slave of a bond device for LACP control plane traffic.
set bonding lacp dedicated_queues <port_id> [enable|disable]
When enabled this option creates dedicated queues on each slave device
for LACP control plane traffic. This removes the need to filter control
plane packets in the data path.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
New command 'ddp del (port) (profile_path)' removes previously
loaded profile and deletes it from the list of the loaded profiles.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch demonstrates how to get information about dynamic device
personalization (DDP) profile.
Command 'ddp get info (path_to_profile)' extracts and prints
information about the given profile.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add parameter to print port statistics periodically
(disabled by default), if interactive mode is not enabled.
This is useful to allow the user to see port statistics
without having to get into the internal command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add parameter to start forwarding sending first
a burst of packets, which is useful when testing
a loopback connection.
This was already implemented as an internal command,
but adding it as a parameter is interesting, as it
allows the user to test a loopback connection without
entering in the internal command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add new meta pattern item RTE_FLOW_TYPE_ITEM_FUZZY in flow API.
This is for device that support fuzzy match option.
Usually a fuzzy match is fast but the cost is accuracy.
i.e. Signature Match only match pattern's hash value, but it is
possible that two different patterns have the same hash value.
Matching accuracy level can be configured by subfield threshold.
Driver can divide the range of threshold and map to different
accuracy levels that device support.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This is changing the API of rte_eal_dev_detach().
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Because the comments in function cmd_add_bonding_slave_parsed() and
cmd_remove_bonding_slave_parsed() is 'Set the primary slave for
a bonded device',so fix it with 'add the slave for a bonded device'
and 'remove the slave from a bonded device'.
Signed-off-by: RongQiang Xie <xie.rongqiang@zte.com.cn>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
These functions are supported only on ixgbe.
However, they should appear in the help and returns an error
if the function is not supported or not enabled.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
When ixgbe bypass is not explicitly disabled while ixgbe is disabled:
app/test-pmd/testpmd.c:304:27: error:
‘RTE_PMD_IXGBE_BYPASS_TMT_OFF’ undeclared here
The ixgbe bypass feature is meaningful only if ixgbe is enabled.
So we need to check both.
A best fix will be to enable bypass always and remove this option.
Fixes: e261265e42 ("ethdev: move bypass functions to ixgbe PMD")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
cmd_set_vf_rxmode_parsed() was defined only in the build context
of RTE_LIBRTE_IXGBE_PMD:
app/test-pmd/cmdline.c:13817:27: error: ‘cmd_set_vf_rxmode’ undeclared here
Fixes: 4cfe399f65 ("net/bnxt: support to set VF rxmode")
Reported-by: Yongseok Koh <yskoh@mellanox.com>
Reported-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Isolated mode can be requested by applications on individual ports to avoid
ingress traffic outside of the flow rules they define.
Besides making ingress more deterministic, it allows PMDs to safely reuse
resources otherwise assigned to handle the remaining traffic, such as
global RSS configuration settings, VLAN filters, MAC address entries,
legacy filter API rules and so on in order to expand the set of possible
flow rule types.
To minimize code complexity, PMDs implementing this mode may provide
partial (or even no) support for flow rules when not enabled (e.g. no
priorities, no RSS action). Applications written to use the flow API are
therefore encouraged to enable it.
Once effective, leaving isolated mode may not be possible depending on PMD
implementation.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds support to configure the VF L2 Rx settings.
The per VF setting is maintained in bnxt_child_vf_info.l2_rx_mask
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to insert a default VF VLAN.
Also track the current default VLAN per vnic for the VF.
When setting the default VLAN, avoid setting it to the current value.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to get and clear VF stats.
It also adds the necessary HWRM structures to send the command
to the firmware.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to
1) enable VF MAC anti spoof.
2) QOS configuration for specified VF.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add functions rte_pmd_bnxt_set_tx_loopback,
rte_pmd_bnxt_set_all_queues_drop_en and
rte_pmd_bnxt_set_vf_mac_addr to configure tx_loopback,
queue_drop and VF MAC address setting in the hardware.
It also adds the necessary functions to send the HWRM commands
to the firmware.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Move all bypass functions to ixgbe pmd and remove function
pointers from the eth_dev_ops struct.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This commit adds TCP flags support in flow API as
some drivers have SYN filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Application fails to create NVGRE and E-Tag flows with
current configuration, this commit fixes the issue by
adding flow items for E_TAG and NVGRE.
Fixes: e4840ef268 ("ethdev: fix incomplete items in flow API")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Coverity reported that an argument for sizeof was used improperly.
We should allocate memory for value size that pointer points to,
instead of pointer size itself.
Coverity issue: 144523, 144521
Fixes: 7ac16a3660 ("app/proc-info: support xstats by ID and by name")
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Adds the "all" option to the print-event and mask-event parameters. This
option will enable or disable all event notifications from being
displayed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The test assumes the socket ids are contiguous. This
is not necessarily the case on all servers and may cause
mempool creation to fail.
Fixing it by detecting the list of valid socket ids and
use it for the mempool creation.
Fixes: 7acf894d07 ("app/testpmd: detect numa socket count")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add two parameters to testpmd:
--print-event <event name>
--mask-event <event name>
To enable or disable to printing of events. This display is configured
on a per-event basis. By default, all except VF_MBOX are displayed.
Fixes: 76ad4a2d82 ("app/testpmd: add generic event handler")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Previous numa_support = 0 by default, it need to add --numa to testpmd
command line to enable numa, so port_numa and ring_numa were initialized
at function launch_args_parse(), now testpmd change numa_support = 1 as
default, so port_numa and ring_numa also need to initialize by default,
otherwise port->socket_id will be probed to wrong value.
Fixes: 999b2ee0fe ("app/testpmd: enable NUMA support by default")
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
MAC addresses are implicitly handled in network order since they are
actually byte strings, however this is not properly enforced with MAC masks
provided as prefix lengths, which end up inverted on little endian
systems.
Fixes: 6df81b325f ("app/testpmd: add items eth/vlan to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The parameter type parser function stores a stack-local address in the
global parser context when parsing a "prefix" keyword.
This usually translates to "Bad arguments" errors even for correct flow
rules as stack gets overwritten by subsequent function calls.
Fixes: d3f61b7bad ("app/testpmd: add flow item spec prefix length")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Disable latency stats gathering by default,
so there is not performance degradation if user
is not interested in them.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This fixes compiler warnings with GCC 7.
Fixes: 28d62131a1 ("app/testpmd: extend flow director input set commands")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The PCI code will move to the bus drivers directory.
Rename functions from rte_eal_pci_ to rte_pci_
to prepare the move of the driver out of EAL.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
There are new arguments --xstats-ids and --xstats-name
in proc_info command line to retrieve statistics given by ids
and by name.
E.g. --xstats-ids="1,3,5,7,8"
E.g. --xstats-name rx_errors
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Revert patches to provide clear view for
upcoming changes. Reverted patches are listed below:
commit ea85e7d711 ("ethdev: retrieve xstats by ID")
commit a954495245 ("ethdev: get xstats ID by name")
commit 1223608adb ("app/proc-info: support xstats by ID")
commit 25e38f09af ("net/e1000: support xstats by ID")
commit 923419333f ("net/ixgbe: support xstats by ID")
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Adds support to testpmd to load a set of cmdline CLI commands at runtime.
This can be helpful when needing to cut-n-paste many commands where
cut-n-paste may not be practical.
testpmd> load /home/ubuntu/somefile.txt
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Adds support to testpmd to load a set of cmdline CLI commands at startup.
This can be helpful when needing to cut-n-paste many commands each time
testpmd is restarted. This option will work in both interactive and
non-interactive modes.
./testpmd -n4 -c3 ... -- --cmdline-file=/home/ubuntu/somefile.txt
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Bit-rate collation should only be done by one core. This patch adds
an option to select which core performs the bit-rate calculation,
which is also disabled by default.
Fixes: 7e4441c8ef ("app/testpmd: add bitrate statistics calculation")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When testpmd exits, it frees the acquired resources (e.g. stop ports).
However, when we terminate it by Ctrl-d, testpmd exits directly without
releasing the resources. In this patch, we fix this exit issue.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Since
commit 999b2ee0fe ("app/testpmd: enable NUMA support by default"),
testpmd is started with numa enabled by default. This highlights a
floating point exception when started with --total-num-mbufs without any
port (division by 0). This bug was already triggered before this commit
if the --no-numa option was given.
This commit adds a check of the nb_ports value before doing the
division. By looking at this code, it appears that the creation of the
mbuf pool is not consistent for the number of mbufs depending on the
configuration. This is fixed in the next commit.
Fixes: b6ea6408fb ("ethdev: store numa_node per device")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
E-Tag and NVGRE pattern items have been added hastily without updating
documentation nor testpmd.
This commit also adds default masks for these items based on the ixgbe
implementation.
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
fix proc-info xstats-name description string
Fixes: 1223608adb ("app/proc-info: support xstats by ID")
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
There is little reason for NUMA support in testpmd to be off by default, so
enable it, and add in a new commandline parameter to disable it, if that is
wanted by users.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Enable device removal event for PMD supporting it.
Add the --no-rmv-interrupt parameter to explicitly disable it.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Signed-off-by: Elad Persiko <eladpe@mellanox.com>
For drivers supporting the LSC event, enable it.
This allows to test LSC event support.
Add the --no-lsc-interrupt parameter to explicitly disable the link status
change interrupt.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This is a rather simple handler that prints a message with the name of
the current event. It can be used to check PMD callback registration and
triggers.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
There is a new argument --xstats-ids and --xstats-name
in proc_info command line to retrieve statistics given by ids
and by name.
E.g. --xstats-ids="1,3,5,7,8"
E.g. --xstats-name rx_errors
ethdev: mark functions as deprecated
Functions rte_eth_xstats_get_all and rte_eth_xstats_get_names_all
are marked as deprecated
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Extended xstats API in ethdev library to allow grouping of stats
logically so they can be retrieved per logical grouping managed
by the application.
Changed existing functions rte_eth_xstats_get_names and
rte_eth_xstats_get to use a new list of arguments: array of ids
and array of values. ABI versioning mechanism was used to
support backward compatibility.
Introduced two new functions rte_eth_xstats_get_all and
rte_eth_xstats_get_names_all which keeps functionality of the
previous ones (respectively rte_eth_xstats_get and
rte_eth_xstats_get_names) but use new API inside.
test-pmd: add support for new xstats API retrieving by id in
testpmd application: xstats_get() and
xstats_get_names() call with modified parameters.
doc: add description for modified xstats API
Documentation change for modified extended statistics API functions.
The old API only allows retrieval of *all* of the NIC statistics
at once. Given this requires a MMIO read PCI transaction per statistic
it is an inefficient way of retrieving just a few key statistics.
Often a monitoring agent only has an interest in a few key statistics,
and the old API forces wasting CPU time and PCIe bandwidth in retrieving
*all* statistics; even those that the application didn't explicitly
show an interest in.
The new, more flexible API allow retrieval of statistics per ID.
If a PMD wishes, it can be implemented to read just the required
NIC registers. As a result, the monitoring application no longer wastes
PCIe bandwidth and CPU time.
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
For AEAD algorithms, additional authenticated data (AAD)
can be passed, but it is optional, so its size can be zero.
Therefore, test can be run if no memory is allocated.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When SNOW3G/KASUMI/ZUC algorithms are used, ciphering
and authentication lengths have to be passed as bits
and not as bytes.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the crypto operation resubmission problem in crypto
perferformance test. Originally, when needed crypto ops amount is
smaller than the enqueued crypto ops in the last round, one or more
processed crypto operations will be re-enqueued.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In the latency test, when number of enqueued operations
is less than the burst size, the timestamp value of the
non-enqueued operations was being stored, even though
those operations were being freed.
This could cause an array overflow, since it could store
more values than the total number of operations.
Fixes: 5d75fb09d3 ("app/crypto-perf: fix invalid latency for QAT")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When ipv6 packet is tunnel packet, "PKT_TX_OUTER_IPV6" flag must
be set, to let prepare the correct mbuf meta data for tx forward.
Fixes: 2b76648872 ("net/e1000: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
app's rxmode, VF driver will report the VF launch failure. So this
patch default to enable HW CRC strip to let VF launch successful.
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This fixes build in following configuration:
CONFIG_RTE_LIBRTE_CRYPTODEV=n
CONFIG_RTE_APP_CRYPTO_PERF=y
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reorganize options structure, to have all the parameters
used in a single run in the first bytes of the structure,
so all fit in a single cache line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When using the verify test, test name is necessary
to be passed when digest is needed.
Also, when using an block cipher algorithm (CBC, ECB),
the buffer size has to be aligned to the block size.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
So far, the crypto performance application was only able to
test one buffer size and one burst size.
With this commit, multiple sizes can be passed, either as a range
of values or as a list of values.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Instead of printing the test results in the destructor
function, print them just after each run.
This will be useful for after the commit that allows
a range of buffer and burst sizes.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When testing cipher only operations, there is no need to append digest
at the end of the buffer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
In order to simplify throughput and latency tests,
verify option has been removed from these and moved
as a separate test.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Ciphertext and digests for different buffer sizes
were incorrect.
Fixes: 5f1d85c5a8 ("app/crypto-perf: add test vectors files")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
