VLAN insertion can be done in hardware when supported in Verbs. A software
fallback is provided otherwise. The software implementation is also used
when multi-packet send is enabled on a queue, as both features are mutually
exclusive.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Environment variable MLX5_PMD_ENABLE_PADDING enables HW packet padding
in PCI bus transactions.
When packet size is cache aligned and CRC stripping is enabled, 4 fewer
bytes are written to the PCI bus. Enabling padding makes such packets
aligned again.
In cases where PCI bandwidth is the bottleneck, padding can improve
performance by 10%.
This is disabled by default since this can also decrease performance for
unaligned packet sizes.
Signed-off-by: Olga Shern <olgas@mellanox.com>
fix packet padding macro check
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Secondary processes are expected to use queues and other resources
allocated by the primary, however Verbs resources can only be shared
between processes when inherited through fork().
This limitation can be worked around for TX by configuring separate queues
from secondary processes.
Signed-off-by: Or Ami <ora@mellanox.com>
Add driver functions to set link state up or down.
Burst functions are updated to make sure applications cannot attempt to
send/receive after link is brought down.
Signed-off-by: Or Ami <ora@mellanox.com>
When Linux PF and DPDK VF are used for i40e PMD, when a PF reset occurs,
an interrupt will go via adminq event to inform the VF of the reset.
A callback mechanism is introduced for the VF to allow it to invoke a
registered callback when PF reset happens.
Users can register a callback for this interrupt event using:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Currently, i40evf PMD uses a global static buffer to send virtchnl
commands to host driver. It is shared by multiple VFs.
This patch changed to allocate a virtchnl cmd buffer for each VF.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The patch introduces a new PMD. This PMD is implemented as thin wrapper
of librte_vhost. It means librte_vhost is also needed to compile the PMD.
The vhost messages will be handled only when a port is started. So start
a port first, then invoke QEMU.
The PMD has 2 parameters.
- iface: The parameter is used to specify a path to connect to a
virtio-net device.
- queues: The parameter is used to specify the number of the queues
virtio-net device has.
(Default: 1)
Here is an example.
$ ./testpmd -c f -n 4 --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1' -- -i
To connect above testpmd, here is qemu command example.
$ qemu-system-x86_64 \
<snip>
-chardev socket,id=chr0,path=/tmp/sock0 \
-netdev vhost-user,id=net0,chardev=chr0,vhostforce,queues=1 \
-device virtio-net-pci,netdev=net0,mq=on
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Update for queue state event name:
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds a below event type.
- RTE_ETH_EVENT_QUEUE_STATE
This event will occur when some queues are enabled or disabled.
So far, only vhost PMD supports the event, and it indicates some queues
are enabled or disabled by virtio-net device. Such an event is needed
because virtio-net device may not enable all queues vhost PMD prepare.
Because only vhost PMD uses the event so far, it isn't an actual hardware
interrupt but a simple software event.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Minor modification to event name and comment:
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is a PMD for the Amazon ethernet ENA (Elastic Network Adapters)
family.
The driver operates variety of ENA adapters through feature negotiation
with the adapter and upgradable commands set.
ENA driver handles PCI Physical and Virtual ENA functions.
Signed-off-by: Evgeny Schemeilin <evgenys@amazon.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Release Note addition:
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Implementation of platform specific code for ENA communication layer.
Signed-off-by: Evgeny Schemeilin <evgenys@amazon.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Low level common abstraction for ENA device communication.
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Add a new API rte_eth_dev_get_supported_ptypes to query what packet types
can be filled by a given device. The device should be already started or
its PMD RX burst function already decided, since the packet types supported
may vary depending on RX function.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The option --no-summary will remove this line in quiet mode:
total: 1 errors, 0 warnings, 7 lines checked
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
probe the kernel module existence through /sys/module/ to make it work
with both module and inbuilt kernel module
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
flake8 checks were run for both python 2.7 and 3.4
There were some style issues as:
- Line width > 79
- No double blank line before function definition
- No double blank space before inline comment
- Some other minor issues
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: John McNamara <john.mcnamara@intel.com>
The output for the core list included an extra linefeed making
the number of lines displayed much larger then required.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
This test expects that a vdev is instanciated on the command
line. If it's not the case, just skip this part.
Fixes: 4ea3801b32 ("app/test: fix ring unit test")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
NULL crypto operation is now supported, but l2fwd-crypto
was missing an update on the list of supported algorithms
that can be passed from command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
AES GCM is an algorithm for both ciphering and authentication,
but the authentication algorithm was missing in the
list of supported algorithms that can be passed from command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Since SNOW3G UEA2/UIA2 are supported now by both HW and SW,
l2fwd-crypto may use them, extending the list of algorithms
parsed from command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Previous cdev parameter was changed to cdev_type,
to select a crypto device type preference (HW/SW/ANY),
instead of the device itself (QAT/AESNI...).
Also deleted cdev duplicated parameter from the help.
Fixes: 27cf2d1b18 ("examples/l2fwd-crypto: discover capabilities")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The new flag CONFIG_RTE_ARCH_ARM_NEON_MEMCPY is used to enable memcpy
optimizations in EAL.
As it is not always the performance benefit, the feature is disabled.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
ARMv7 machines have usually the NEON available.
Customization of the -mfpu=neon must be done by hand or by defining
another machine rte.vars.mk.
So, the CONFIG_RTE_ARCH_ARM_NEON is useless (and confusing).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Normal usage of rte_eth_dev_xstats_get is to call twice. The
first time the function is called with portid, xstats = NULL
and n = 0; this returns the number of entries in the statistics
table that need to be allocated.
The problem is that the routine adds a count value to NULL (0)
and assumes that this is a valid pointer (it isn't). Device drivers
all have a check for NULL, and this no longer matches.
Fixes: d4fef8b0d5 ("ethdev: expose generic and driver specific stats in xstats")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In openSUSE Tumbleweed (and in any other SUSE distribution which
uses (or will use) gcc >= 5), gcc -dumpversion returns '5'. This is on
purpose as discussed in https://bugzilla.opensuse.org/show_bug.cgi?id=941428
As a result of which, the gcc-4.x comparison (40 against 5) does not
work leading to tons of warnings and failures during build.
This patch aims to change the way the gcc version is obtained by using
the gcc macros directly.
This is similar to what's being used in the Linux kernel. Querying the
GCC macros directly gives more accurate results compared to -dumpversion
which could vary across distributions.
Signed-off-by: Markos Chandras <mchandras@suse.de>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
For GLIBC < 2.17 it is necessery to add -lrt for linker
from glibc > 2.17 The `clock_*' suite of functions (declared in <time.h>) is now
available directly in the main C library. This affect Ubuntu 12.04 in i686
and other older Linux Distros).
Fixes: 4758404a30 ("mk: fix eal shared library dependencies")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Commit e86a699cf6 missed two further libm dependencies: ceil() used
by librte_meter is typically inlined so the missing dependency does not
actually cause failures, and librte_pmd_nfp is not built by default
so its easy to miss.
This causes duplicates in LDLIBS in many configurations so its vital
they are removed before passing to linker.
Fixes: e86a699cf6 ("mk: fix shared library dependencies on libm and librt")
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Duplicates in LDLIBS can cause link failures from multiply defined
symbols, ensure all libraries are only mentioned once. Can't use
sorting for duplicate elimination as order is critical so awk one-liner
is used.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
When compiling each file, the CPU flags are given as RTE_MACHINE_CPUFLAG_*
and in the list RTE_COMPILE_TIME_CPUFLAGS.
RTE_MACHINE_CPUFLAG_* are used to check the CPU features when compiling.
The list RTE_COMPILE_TIME_CPUFLAGS is used only to check the CPU at
runtime in the function rte_cpu_check_supported(). So it is not needed to
define this list for every files.
That's why RTE_COMPILE_TIME_CPUFLAGS is removed from the common variable
MACHINE_CFLAGS and is added only to the CFLAGS of eal_common_cpuflags.c.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The flag ENABLE_MULTI_BUFFER_OPTIMIZE has been removed so the
related comments are now useless.
Fixes: 268888b5b0 ("examples/l3fwd: modularize")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
clang reports these errors:
error: too many arguments to function call, expected 2, have 3
examples/performance-thread/l3fwd-thread/main.c:1220:1: note:
'l3fwd_simple_forward' declared here
examples/l3fwd/main.c:550:1: error: unused function 'send_packetsx4'
The function is used only when ENABLE_MULTI_BUFFER_OPTIMIZE is 1.
Fixes: d48415e1fe ("examples/performance-thread: add l3fwd-thread app")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch fixes error #188: enumerated type mixed with another type,
when uint32_t is casted on enum type in icc.
Fixes: 05f1b9c82e ("app/testpmd: add commands for L2 tunnel config")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Issuing a zero objects dequeue with a single consumer has no effect.
Doing so with multiple consumers, can get more than one thread to succeed
the compare-and-set operation and observe starvation or even deadlock in
the while loop that checks for preceding dequeues. The problematic piece
of code when n = 0:
cons_next = cons_head + n;
success = rte_atomic32_cmpset(&r->cons.head, cons_head, cons_next);
The same is possible on the enqueue path.
Fixes: af75078fec ("first public release")
Signed-off-by: Lazaros Koromilas <l@nofutznetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In certain autotests lpm->max_rules turned out to be non initialized.
That was caused by a failing allocation for lpm->rules_tbl in rte_lpm6_create.
It then left the function via goto exit with lpm freed, but still a pointer
value being set.
In case of an allocation failure it resets lpm to NULL now, to avoid the
upper layers operate on that already freed memory.
Along that is also makes the RTE_LOG message of the failed allocation unique.
Fixes: 5c510e13a9 ("lpm: add IPv6 support")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
lpm6 autotests failed with the default alloc of 512M Memory.
While >=2500M was a workaround it became clear while debugging that it
had a leak.
One could see a lot of output like:
LPM Test tests6[i]: FAIL
LPM: LPM memory allocation failed
It turned out that in rte_lpm6_free
- lpm might not be freed if it didn't find a te (early return)
- lpm->rules_tbl was not freed ever
Fixes: 899d8bc9b3 ("lpm: make tailq fully local")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There were further chances for a use after free by returning an already
freed pointer in rte_lpm_create for v20 and v1604.
Along that is also makes the RTE_LOG messages of the failed allocations
unique.
Fixes: f1f7261838 ("lpm: add a new config structure for IPv4")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In rte_lpm_free lpm might not be freed if it didn't find a te (early return)
The two lpm interfaces rte_lpm_free_v20 and rte_lpm_free_v1604 had a leak.
rte_lpm_free_v20 might have missed to free rules_tbl
rte_lpm_free_v1604 due to an early exit might have missed to free
rules_tbl and lpm itself.
Fixes: 899d8bc9b3 ("lpm: make tailq fully local")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Comment for "ierrors" counter says that it counts erroneous received
packets. But for some reason "imissed" counter is added to "ierrors"
counter in most drivers.
It is a mistake, because missed packets are obviously not received.
This patch fixes it.
Fixes: 70bdb18657 ("ethdev: add Rx error counters for missed, badcrc and badlen packets")
Fixes: 6bfe648406 ("i40e: add Rx error statistics")
Fixes: 856505d303 ("cxgbe: add port statistics")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch implements PQoS as a sample application.
PQoS allows management of the CPUs last level cache,
which can be useful for DPDK to ensure quality of service.
The sample app links against the existing 01.org PQoS library
(https://github.com/01org/intel-cmt-cat).
White paper demonstrating example use case "Increasing Platform Determinism
with Platform Quality of Service for the Data Plane Development Kit"
(http://www.intel.com/content/www/us/en/communications/increasing-platform-determinism-pqos-dpdk-white-paper.html)
Signed-off-by: Wojciech Andralojc <wojciechx.andralojc@intel.com>
Signed-off-by: Tomasz Kantecki <tomasz.kantecki@intel.com>
Signed-off-by: Marcel D Cornu <marcel.d.cornu@intel.com>
It seems that for the most use cases, previous hash_multi_lookup provides
better performance, and more, sequential lookup can cause significant
performance drop.
This patch sets previously optional hash_multi_lookup method as default.
It also provides some minor optimizations such as queue drain only on used
tx ports.
Fixes: 94c54b4158 ("examples/l3fwd: rework exact-match")
Fixes: dc81ebbaca ("lpm: extend IPv4 next hop field")
Fixes: 64d3955de1 ("examples/l3fwd: fix ARM build")
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
l3fwd does not compile with HASH_MULTI_LOOKUP.
2 issues:
* in 64d395 mask0 changed type from xmm_t to rte_xmm_t
-> use x field from rte_xmm_t
* in dc81eb dst_port parameter changed to uint32_t
-> change uint16_t dst_port to uin32_t dsp_port
Fixes: dc81ebbaca ("lpm: extend IPv4 next hop field")
Fixes: 64d3955de1 ("examples/l3fwd: fix ARM build")
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
