librte_malloc was long since merged into librte_eal, mop up the
leftover references to it from driver Makefiles.
Fixes: 2f9d47013e ("mem: move librte_malloc to eal/common")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Applied with qede Makefile update too.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
On hosts running a non-DPDK PF driver, the VF has no means of changing
the HW CRC strip setting for a RX queue. It's implicitly enabled.
This patch checks if the host is running a non-DPDK PF kernel driver,
and returns an error, if HW CRC stripping was not requested in the port
configuration.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
In i40evf_config_vlan_pvid the check for NULL for the dev value is
unnecessary, since this value is passed in from the ethdev API which
will ensure that a valid rte_eth_dev structure is provided.
Furthermore, all code paths leading to this function already use the
dev value.
Issue identified by Coverity.
Coverity ID 13302:
There may be a null pointer dereference, or else the comparison against
null is unnecessary.
In i40evf_config_vlan_pvid: All paths that lead to this null pointer
comparison already dereference the pointer earlier
Fixes: 2b12431b53 ("i40e: add vlan stripping and insertion to VF")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
In Table 8-16 of the "Intel® Ethernet Controller XL710 Datasheet" it is
stated that when the whole packet is written to a single buffer, the
header length field in the descriptor will be 0. This means that when
extracting the packet/data_len field from the descriptor in the driver
we do not need to mask out the extra header-length bits.
Inside the vector driver, this reduces the need to pull all four pktlen
fields into a single register to work on. Instead of a shift and mask,
we now need to only do a shift. Therefore, we can work on each descriptor
independently, processing each using one shift intrinsic and a blend.
This change makes the code shorter and easier to read, so we can pull it
into the main descriptor processing loop instead of needing its own
function. This in turn makes the descriptor processing in the loop as a
whole slightly easier to read as it's more linear.
In terms of performance, in testing this change shows little effect, with
single-core perf tests showing a very slight improvement.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
An analysis of the i40e code using Intel® VTune™ Amplifier 2016 showed
that the code was unexpectedly causing stalls due to "Loads blocked by
Store Forwards". This can occur when a load from memory has to wait
due to the prior store being to the same address, but being of a smaller
size i.e. the stored value cannot be directly returned to the loader.
[See ref: https://software.intel.com/en-us/node/544454]
These stalls are due to the way in which the data_len values are handled
in the driver. The lengths are extracted using vector operations, but those
16-bit lengths are then assigned using scalar operations i.e. 16-bit
stores.
These regular 16-bit stores actually have two effects in the code:
* they cause the "Loads blocked by Store Forwards" issues reported
* they also cause the previous loads in the RX function to actually be a
load followed by a store to an address on the stack, because the 16-bit
assignment can't be done to an xmm register.
By converting the 16-bit store operations into a sequence of SSE blend
operations, we can ensure that the descriptor loads only occur once, and
avoid both the additional stores and loads from the stack, as well as the
stalls due to the blocked loads.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
Later commits to improve the driver will make use of the SSE4.1
_mm_blend_epi16 intrinsic, so:
* set the compilation level to always have SSE4.1 support,
* and add in a runtime check for SSE4.1 as part of the condition checks
for vector driver selection.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Zhe Tao <zhe.tao@intel.com>
This patch removes several redundant forward declarations
in i40e_fdir.c.
Fixes: a778a1fa2e ("i40e: set up and initialize flow director")
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds LLDP and DCBX capabilities to the qede PMD.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
The physical link is handled by the management Firmware.
This patch lays the infrastructure for interrupt/attention handling in
the driver, as link change notifications arrive via async interrupts,
as well as the handling of such notifications. It adds async event
notification handler interfaces to the PMD.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
This patch adds the features to supports configuration of various Layer 2
elements, such as channels and filtering options.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
The Qlogic Everest Driver for Ethernet(QEDE) Poll Mode Driver(PMD) is
the DPDK specific module for QLogic FastLinQ QL4xxxx 25G/40G CNA family
of adapters as well as their virtual functions (VF) in SR-IOV context.
This patch adds QEDE PMD, which interacts with base driver and
initialises the HW.
This patch content also includes:
- eth_dev_ops callbacks
- Rx/Tx support for the driver
- link default configuration
- change link property
- link up/down/update notifications
- vlan offload and filtering capability
- device/function/port statistics
- qede nic guide and updated overview.rst
Note that the follow on commits contain the code for the features mentioned
in documents but not implemented in this patch.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
The base driver is the backend module for the QLogic FastLinQ QL4xxxx
25G/40G CNA family of adapters as well as their virtual functions (VF)
in SR-IOV context.
The purpose of the base module is to:
- provide all the common code that will be shared between the various
drivers that would be used with said line of products. Flows such as
chip initialization and de-initialization fall under this category.
- abstract the protocol-specific HW & FW components, allowing the
protocol drivers to have clean APIs, which are detached in its
slowpath configuration from the actual Hardware Software Interface(HSI).
This patch adds a base module without any protocol-specific bits.
I.e., this adds a basic implementation that almost entirely falls under
the first category.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Fix issue reported by Coverity.
Coverity ID 13193: Bad bit shift operation (BAD_SHIFT)
large_shift: In expression 1 << pool, left shifting by more than 31 bits
has undefined behavior. The shift amount, pool, is at least 32.
This patch is a rework of register addr selection logic and mask
computation to made it more readable and avoid bit overflow when 32 bit
value is shifted over its size for pool > 31.
Fixes: fe3a45fd41 ("ixgbe: add VMDq support")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The statistics queried by calling rte_eth_stats_get are zero when
the API is first called on the port. The root cause is because the
offset_loaded flag is not set correctly after device start.
This patch fixes this issue by resetting statistics at initialization
time. The resetting process will set offset_loaded flag.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
When building a chain of mbufs for a multi-segment packet, the
packet_type field resides at the end of the chain. It should be
copied forward to the head of the list.
Also, uses RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE to guard packet-type
computation. The mbuf fields are not copied when this define is not set.
Fixes: fe65e1e1ce ("fm10k: add vector scatter Rx")
Signed-off-by: Michael Frasca <michael.frasca@oracle.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The masking for the RX/TX enable bit was incorrect in the rx and tx
queue stop functions. Instead of using "& MASK" it used "| MASK" which
would always return true. This error was found by converity scan.
CID 13215 : Wrong operator used (CONSTANT_EXPRESSION_RESULT)
operator_confusion: txdctl | 33554432 is always 1/true regardless of the
values of its operand. This occurs as the logical second operand of
'&&'.
CID 13216 : Wrong operator used (CONSTANT_EXPRESSION_RESULT)
operator_confusion: rxdctl | 33554432 is always 1/true regardless of the
values of its operand. This occurs as the logical second operand of
'&&'.
Coverity issue: 13215
Coverity issue: 13216
Fixes: 029fd06d40 ("ixgbe: queue start and stop")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The position of register values within i40e register dumps is
supposed to reflect the register addresses. These were not being
correctly calculated.
Fixes: d9efd0136a ("i40e: add EEPROM and registers dumping")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Run ixgbe driver through checkpatch and fix the issues highlighted
Fix line spacing, some bad indentation, and in a couple
of cases use short circuit (already there) return to lessen indentation.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Applied with four additional fixes for issues highlighted by checkpatch
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The header file rte_debug.h makes use of the "unlikely" macro which
means it should include the rte_branch_prediction.h header file.
Fixes: 50705e8e3c ("eal: add assert macro for debug")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The dpdk build system passes -mfloat-abi=softfp, which makes the build fail
when the selected ABI is EABIhf. The dpdk build system should not make
assumptions on the selected ARM ABI.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The debug logs must be enabled at compile-time and run-time.
There are also some internal flags in some examples to enable the debug
logs of the applications. They are now enabled in debug configs and
can be disabled thanks to the more generic logtype mechanism:
rte_set_log_type(RTE_LOGTYPE_USER1, 0);
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The default was to compile every logs (including debug) and set
the default level to debug.
As some debug logs may hurt performance, a notice is added and the
default level is now info.
In order to enable debug logs, they must be compiled with
RTE_LOG_LEVEL=RTE_LOG_DEBUG and enabled at runtime with --log-level=8.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some relevant EAL logs are raised from debug to info level in order to
show the available number of cores and the detected devices.
The driver ids and name are logged only if the device is not blacklisted.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
While parsing token string there may be several modes:
- fixed single string
- multi-choice single string
- any single string
This patch add one more mode - any multi string.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Fix issue reported by clang scan-build
Value of pointer tbl_next was uninitialized. When function lookup_step()
take else branch it may provide garbage into tbl = tbl_next;
Fixes: 5c510e13a9 ("lpm: add IPv6 support")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Back then when we fixed the missing free lpm I was to quickly to say yes
if it applies not only to the lpm6 but also to all of the lpm code.
It turned out to not apply to all of them. In rte_lpm_create_v20 there
is an unexpected fused allocation:
mem_size = sizeof(*lpm) + (sizeof(lpm->rules_tbl[0]) * max_rules);
[...]
lpm = (struct rte_lpm_v20 *)rte_zmalloc_socket(mem_name,mem_size,
RTE_CACHE_LINE_SIZE, socket_id);
That causes lpm->rules_tbl not to have an own struct malloc_elem that
can be derived via RTE_PTR_SUB(data, MALLOC_ELEM_HEADER_LEN) in
malloc_elem_from_data.
Due to that the rte_lpm_free_v20 accidentially misderives the elem and
assumes it is ELEM_FREE triggering in malloc_elem_free
if (!malloc_elem_cookies_ok(elem) || elem->state !=
return -1;
While it seems counter-intuitive the way to properly remove rules_tbl in
the old fused allocation style of rte_lpm_free_v20 is to not remove it.
The newer rte_lpm_free_v1604 is safe because in rte_lpm_create_v1604
rules_tbl is a separate allocation.
Fixes: d4c18f0a1d ("lpm: fix missing free")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
If any fragment hole is found in ipv4_frag_reassemble() and
ipv6_frag_reassemble(), whole ip_frag_pkt mbufs are moved to death-row.
Any mbufs already chained to another mbuf are freed multiple times as
there are still in ip_frag_pkt array.
Signed-off-by: Chaeyong Chong <cychong@gmail.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Although previous implementation returned an error when trying to release
a memzone assigned to an ivshmem device, it stills freed it.
Fixes: cd10c42eb5 ("mem: fix ivshmem freeing")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
rx_q fifo may have chained mbufs, merge them into single skb before
handing to the network stack.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Currently every time a KNI interface goes up, its ethernet address
is reassigned.
After this patch ethernet address is assigned only once,
at initialization time.
Suggested-by: Sergey Balabanov <balabanovsv@ecotelecom.ru>
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
CID 13307 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
fixed_size_dest: You might overrun the 128 byte fixed-size string fwd_modes
by copying fwd_eng->fwd_mode_name without checking the length.
Fixes: 769ce6b178 ("app/testpmd: list forwarding engines")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
It seems that with gcc >5.x and -O2/-O3 optimization breaks packet
grouping algorithm in l3fwd-thread application causing segfault.
When last packet pointer "lp" and "pnum->u64" buffer points the same
memory buffer, high optimization can cause unpredictable results.
It seems that assignment of precalculated group sizes may interfere
with initialization of new group size when lp points value inside
current group and didn't should be changed.
With gcc >5.x and optimization we cannot be sure which assignment will be
done first, so the group size can be counted incorrectly causing segfault.
This patch eliminates intersection of assignment of initial group size
(lp[0] = 1) and precalculated group sizes when gptbl[v].idx < 4.
The same patch was applied for original l3fwd (af1694d94).
Fixes: d48415e1fe ("examples/performance-thread: add l3fwd-thread app")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
CID: #30688
The operaton may have an undefined behavior or yield to an unexpected result.
In setup_port_lcore_affinities: A bit shift operation has a shift amount
which is too large or has a negative value.
Fixes: af75078fec ("first public release")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Fix issue reported by Coverity.
Coverity ID 13240
This could cause an immediate crash or incorrect computation.
In search_ip5tuples: An expression which may be zero is used
as a divisor in floating-point arithmetic.
divide_by_zero: In expression (long double)tm / pkt,
division by expression pkt which may be zero has undefined behavior.
Fixes: 26c057ab6c ("acl: new test-acl application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fix issue reported by Coverity.
Coverity ID 13194
The function returns a value that indicates an error condition. If this
is not checked, the error condition may not be handled correctly.
Fixes: 2f4adfad0a ("vfio: add multiprocess support")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The function rte_memcpy_func() is used in ARM and PPC implementations
of rte_memcpy().
There are some useless copies in Tile and some ARM branches.
It was also declared without doxygen comment in the generic header.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Changed symbol on NIC overview table from X to Y to help
clarify the indicated features are supported. The X caused
confusion for some readers.
Also, added * character to indicate partially supported
features. This can be used in the future to direct the reader
to more specific details in the individual NIC guides.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
After having removed the deprecated stuff, we can start pushing
new fixes and features in the version 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some flags were poisoned after having been removed from EAL and mbuf
in releases 1.8 (b10eef348d, 62814bc2e9) and 2.0 (4769bc5a27).
After several releases, they have probably disappeared from all
applications going to upgrade to DPDK 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The function rte_hash_lookup_multi() was renamed rte_hash_lookup_bulk()
in DPDK 1.4 and was kept as an undocumented alias.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542a).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The driver i40e was using a specific PCI config before the release 16.04.
Since 16.04, it is always enabled in i40e (commit 56465cfaf).
The API has been deprecated in the commit 68f7759382.
The igb_uio implementation has been deprecated in commit b7cf8e155.
The config helper - through igb_uio sysfs entries - is now removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Support of PCAP file has been added to rte_port in release 16.04
as NEXT_ABI. It is in the standard ABI of the release 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
